Abstract:In this paper, the strategies for emission controls to achieve clean and high-efficiency combustion were studied in detail in a common-rail heavy-duty diesel engine coupled with exhaust gas recirculation. The results show that, in comparison with a single-stage turbocharger, a two-stage turbocharger dramatically improves the exhaust gas recirculation recyclability and enhances the air-to-fuel mass flow ratio. Therefore, nitrogen oxide emissions can be reduced to a much lower level, and the nitrogen oxide–brake specific fuel consumption trade-off relationship as well as the nitrogen oxide–soot trade-off relationship can be greatly improved simultaneously at low-speed high-load conditions. However, the peak cylinder pressure increases evidently at high-load conditions for a two-stage turbocharger. The brake specific fuel consumption, the soot emissions and the peak cylinder pressure can be lowered simultaneously by appropriately reducing the compression ratio and optimizing the geometry of the combustion chamber (such as the re-entrant diameter and the bowl depth) as well as using an injector with a tapered nozzle hole. At low- speed high-load conditions, the soot emissions can be reduced obviously without serious penalties in the brake specific fuel consumption when the nitrogen oxide emissions were kept constant by delaying the main-injection timing and reducing the injection pressure. However, it is necessary to employ a higher injection pressure together with a post-injection to reduce the brake specific fuel consumption and the soot emissions at high speeds. The combustion characteristics are mainly dominated by the cetane number of the fuel. With the addition of lower-cetane-number fuel to pure diesel, the ignition delay is prolonged as the exhaust gas recirculation rate increases, thereby also increasing the premixed combustion and reducing the soot emissions sharply. Meanwhile, the crank angle at which there is 50% completion of the accumulated heat release has less influence on the brake thermal efficiency with the addition of lower-cetane-number fuel. 2,5-dimethylfuran, as a novel oxygenated biofuel with a lower cetane number, is superior to gasoline for reducing the soot emissions, which may be a promising and clean alternative in compression ignition engines coupled with exhaust gas recirculation.

Application of Low Cetane Number Fuels in Diesel Engines

3117 Dependence of Ultra-High EGR and Low Oxygen Diesel Combustion on Fuel Properties

Effects of 2-Ethylhexyl Nitrate and Post-Injection Strategy on Combustion and Emission Characterizes in a Dimethyl Carbonate/diesel Blending Engine

Effects of DMF/Diesel and Gasoline/Diesel Blends on Diesel Engine Combustion and Emission Characteristics

Fuel Octane Effects in the Partially Premixed Combustion Regime in Compression Ignition Engines

Low NO[sub x] and Low Smoke Operation of a Diesel Engine Using Gasolinelike Fuels

Effect of Cetane Number Improver on Heat Release Rate and Emissions of High Speed Diesel Engine Fueled with Ethanol-Diesel Blend Fuel

DE1-1: Effects of In-Cylinder Temperature and Fuel-Air Mixing on Smokeless Low Temperature Diesel Combustion(DE: Diesel Engine Combustion,General Session Papers)

Effects of compression ratio and fuel cetane number on ultra-high EGR low temperature diesel combustion

Effects of EGR Dilution on Combustion and Emission Performance of a Compression Ignition Engine Fueled with Dimethyl Carbonate and 2-Ethylhexyl Nitrate Additive

Effects of Fuel Properties on Combustion and Emissions under Both Conventional and Low Temperature Combustion Mode Fueling 2,5-Dimethylfuran/diesel Blends

Improving the Combustion and Emissions of Direct Injection Compression Ignition Engines Using Oxygenated Fuel Additives Combined with A Cetane Number Improver

Effects of Diesel Hydrocarbon Components on Cetane Number and Engine Combustion and Emission Characteristics

Effects of high cetane diesel on combustion, performance, and emissions of heavy-duty diesel engine

Strategies for Emissions Control in Heavy-Duty Diesel Engines to Achieve Low-Emissions Combustion with A High Efficiency

An Experimental and Numerical Study on the Effects of Fuel Properties on the Combustion and Emissions of Low-Temperature Combustion Diesel Engines

Effects of low-carbon high-reactivity fuels on combustion and emission characteristics in a part-load condition of a DICI engine

Characteristics of Low Temperature and Low Oxygen Diesel Combustion with Ultra-High Exhaust Gas Recirculation

Effects of Internal EGR and Fuel Octane Number of Fuel on Low Temperature Combustion at Low Loads

Effect of Injection Parameters on Low Temperature Combustion Fuelled with Diesel Blended Fuel

Effects of 2,5-Dimethylfuran Fuel Properties Coupling with EGR (exhaust Gas Recirculation) on Combustion and Emission Characteristics in Common-Rail Diesel Engines