A Molecularly Imprinted Electrochemical Enzymeless Sensor Based on Functionalized Gold Nanoparticle Decorated Carbon Nanotubes for Methyl-Parathion Detection

Bowan Wu,Lijie Hou,Miao Du,Tiantian Zhang,Zhihua Wang,Zhonghua Xue,Xiaoquan Lu

DOI: https://doi.org/10.1039/c4ra06210h

IF: 4.036

2014-01-01

RSC Advances

Abstract:Schematic of MP MIP sensor and the possible mechanism.

What problem does this paper attempt to address?

A robust electrochemical sensing platform using carbon paste electrode modified with molecularly imprinted microsphere and its application on methyl parathion detection

Yangguang Li,Jiang Liu,Yang Zhang,Meng Gu,Dongyang Wang,Yan-Yan Dang,Bang-Ce Ye,Yingchun Li

DOI: https://doi.org/10.1016/j.bios.2018.01.057

2018-05-30

Abstract:A highly sensitive electrochemical sensor using a carbon paste electrode (CPE) modified with surface molecularly imprinted polymeric microspheres (SMIPMs) was developed for methyl parathion (MP) detection. Molecular imprinting technique based on distillation precipitation polymerization was applied to prepare SMIPMs and non-surface imprinted microspheres (MIPMs). The polymer properties including morphology, size distribution, BET specific surface area and adsorption performance were investigated and compared carefully. Both MIPMs and SMIPMs were adopted to prepare CPE sensors and their electrochemical behaviors were characterized via cyclic voltammetry and electrochemical impedance spectroscopy. Compared with MIPMs packed sensor, SMIPMs/CPE exhibits a higher sensing response towards MP with linear detection range of 1 × 10-12-8 × 10-9 mol L-1 and detection limit of 3.4 × 10-13 mol L-1 (S/N = 3). Moreover, SMIPMs/CPE exhibits good selectivity and stability in multiple-cycle usage and after long-time storage. Finally, the developed sensor was used to determine MP in real samples including soil and vegetables and only simple pretreatment is needed. The detection results were consistent with those obtained from liquid chromatography. Collectively, this newly developed sensor system shows significant potential for use in a variety of fields like food safety, drug residue determination and environmental monitoring.
Determination of methyl parathion by solid-phase extraction on an ionic liquid–carbon nanotube composite electrode

wenzhi tang,jiazheng zhou,qunqing yang,qiqi zheng,jian wu

DOI: https://doi.org/10.1039/c4ay01062k

IF: 3.1

2014-01-01

Analytical Methods

Abstract:A novel electrode made of carbon nanotube and ionic liquid (n-octylpyridinium hexafluorophosphate) was developed for the solid-phase extraction and detection of methyl parathion (MP). The electrode effectively accumulated MP and increased the cathodic peak current. Cyclic voltammetry was used to characterize the fabricated electrode and the electrochemical properties of MP on it. Linear sweep voltammetry was used for the quantitative detection of MP. A self-correcting algorithm was exploited to isolate the small peak of MP from the large background current, obtaining a remarkable peak for MP along with a flat baseline. With a preconcentration time of 3 minutes, the peak current was linear for MP concentrations in the range from 0.1 to 2.5 mu g mL(-1) with a detection limit of 0.008 mu g mL(-1) (S/N = 3). The electrode was applied to detect MP in soil and food samples. These results indicated that the proposed method was capable of monitoring MP, providing a simple approach for routine analysis.
VXC-72R/ZrO2/GCE-Based Electrochemical Sensor for the High-Sensitivity Detection of Methyl Parathion

Runqiang Liu,Yashuang Wang,Bo Li,Binbin Liu,Huina Ma,Dongdong Li,Li Dong,Fang Li,Xiling Chen,Xinming Yin

DOI: https://doi.org/10.3390/ma12213637

IF: 3.4

2019-11-05

Materials

Abstract:In this work, a carbon black (VXC-72R)/zirconia (ZrO2) nanocomposite-modified glassy carbon electrode (GCE) was designed, and a VXC-72R/ZrO2/GCE-based electrochemical sensor was successfully fabricated for the high-sensitivity detection of methyl parathion (MP). Electrochemical measurements showed that the VXC-72R/ZrO2/GCE-based electrochemical sensor could make full use of the respective advantages of the VXC-72R and ZrO2 nanoparticles to enhance the MP determination performance. The VXC-72R nanoparticles had high electrical conductivity and a large surface area, and the ZrO2 nanoparticles possessed a strong affinity to phosphorus groups, which could achieve good organophosphorus adsorption. On the basis of the synergistic effect generated from the interaction between the VXC-72R and ZrO2 nanoparticles, the VXC-72R/ZrO2/GCE-based electrochemical sensor could show excellent trace analysis determination performance. The low detection limit could reach up to 0.053 μM, and there was a linear concentration range of 1 μM to 100 μM. Such a high performance indicates that the VXC-72R/ZrO2/GCE-based electrochemical sensor has potential in numerous foreground applications.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Gold Nanoclusters Anchored Manganese Dioxide Nanocomposites with High Structural Stability for Sensitive Detection of Methyl Parathion

Hongxia Li,Changshun Su,Jinyu Si,Chunyan Sun,Geyu Lu,Xu Yan

DOI: https://doi.org/10.1016/j.snb.2023.134736

IF: 9.221

2023-10-09

Sensors and Actuators B Chemical

Abstract:A long-standing goal has been to create a high-energy transfer system for food safety detection. Herein, gold nanoclusters-anchored manganese dioxide (AuNCs@MnO 2 ) nanocomposites are designed by using co-template assembly. Bovine serum albumin is utilized as both skeletons of nucleation and stabilizer to guide the synthesis of the AuNCs@MnO 2 nanocomposites under physiological conditions without the use of any potent oxidants and the hazardous organic solvent. The AuNCs@MnO 2 nanocomposites exhibit good energy transfer efficiency and structural stability even under high salt conditions and a wide range of pH values. A sensitive sensing platform for the detection of methyl paraoxon has been constructed as a result of the excellent performance of AuNCs@MnO 2 nanocomposites. Acetylcholinesterase catalyzes the conversion of the substrate to produce thiocholine, which induces the decomposition of MnO 2 and the fluorescence recovery of AuNCs. Coupling with the pesticide inhibition effect, the platform can be employed to quantify methyl parathion with a detection limit of 3.1 pg mL -1 . The AuNCs@MnO 2 -based platform displays high stability and anti-interference capability in food and environment samples, endowing practical application in food safety monitoring.

chemistry, analytical,electrochemistry,instruments & instrumentation
Electrochemical Organophosphorus Pesticide Detection Using Nanostructured Gold-Modified Electrodes

Han-Wei Chang,Chien-Lin Chen,Yan-Hua Chen,Yu-Ming Chang,Feng-Jiin Liu,Yu-Chen Tsai

DOI: https://doi.org/10.3390/s22249938

IF: 3.9

2022-12-16

Sensors

Abstract:In this study, nanostructured gold was successfully prepared on a bare Au electrode using the electrochemical deposition method. Nanostructured gold provided more exposed active sites to facilitate the ion and electron transfer during the electrocatalytic reaction of organophosphorus pesticide (methyl parathion). The morphological and structural characterization of nanostructured gold was conducted using field-emission scanning electron microscopy (FESEM), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD), which was further carried out to evaluate the electrocatalytic activity towards methyl parathion sensing. The electrochemical performance of nanostructured gold was investigated by electrochemical measurements (cyclic voltammetry (CV) and differential pulse voltammetry (DPV)). The proposed nanostructured gold-modified electrode exhibited prominent electrochemical methyl parathion sensing performance (including two linear concentration ranges from 0.01 to 0.5 ppm (R2 = 0.993) and from 0.5 to 4 ppm (R2 = 0.996), limit of detection of 5.9 ppb, excellent selectivity and stability), and excellent capability in determination of pesticide residue in real fruit and vegetable samples (bok choy and strawberry). The study demonstrated that the presented approach to fabricate a nanostructured gold-modified electrode could be practically applied to detect pesticide residue in agricultural products via integrating the electrochemical and gas chromatography coupled with mass spectrometry (GC/MS-MS) analysis.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Development of a novel optical biosensor for detection of organophosphorus pesticides based on methyl parathion hydrolase immobilized by metal-chelate affinity.

Wensheng Lan,Guoping Chen,Feng Cui,Feng Tan,Ran Liu,Maolidan Yushupujiang

DOI: https://doi.org/10.3390/s120708477

2012-01-01

Abstract:We have developed a novel optical biosensor device using recombinant methyl parathion hydrolase (MPH) enzyme immobilized on agarose by metal-chelate affinity to detect organophosphorus (OP) compounds with a nitrophenyl group. The biosensor principle is based on the optical measurement of the product of OP catalysis by MPH (p-nitrophenol). Briefly, MPH containing six sequential histidines (6 × His tag) at its N-terminal was bound to nitrilotriacetic acid (NTA) agarose with Ni ions, resulting in the flexible immobilization of the bio-reaction platform. The optical biosensing system consisted of two light-emitting diodes (LEDs) and one photodiode. The LED that emitted light at the wavelength of the maximum absorption for p-nitrophenol served as the signal light, while the other LED that showed no absorbance served as the reference light. The optical sensing system detected absorbance that was linearly correlated to methyl parathion (MP) concentration and the detection limit was estimated to be 4 μM. Sensor hysteresis was investigated and the results showed that at lower concentration range of MP the difference got from the opposite process curves was very small. With its easy immobilization of enzymes and simple design in structure, the system has the potential for development into a practical portable detector for field applications.
Molecularly Imprinted Poly(thionine)-Based Electrochemical Sensing Platform for Fast and Selective Ultratrace Determination of Patulin

Qingwen Huang,Zhihui Zhao,Dongxia Nie,Keqiu Jiang,Wenbo Guo,Kai Fan,Zhiqi Zhang,Jiajia Meng,Yongjiang Wu,Zheng Han

DOI: https://doi.org/10.1021/acs.analchem.8b05791

IF: 7.4

2019-01-01

Analytical Chemistry

Abstract:An innovative approach based on a surface functional monomer-directing strategy for the construction of a sensitive and selective molecularly imprinted electrochemical sensor for patulin recognition is described. A patulin imprinted platinum nanoparticle (PtNP)-coated poly(thionine) film was grown on a preformed thionine tailed surface of PtNP-nitrogen-doped graphene (NGE) by electro-polymerization, which provided high capacity and fast kinetics to uptake patulin molecules. Thionine acted not only as a functional monomer for molecularly imprinted polymer (MIP), but also as a signal indicator. Enhanced sensitivity was obtained by combining the excellent electric conductivity of PtNPs, NGE, and thionine with multisignal amplification. The designed sensor displayed excellent performance for patulin detection over the range of 0.002-2 ng mL(-1) (R-2 = 0.995) with a detection limit of 0.001 ng mL(-1) for patulin. In addition, the resulting sensor showed good stability and high repeatability and selectivity. Furthermore, the feasibility of its applications has also been demonstrated in the analysis of real samples, providing novel tactics for the rational design of MIP-based electrochemical sensors to detect a growing number of deleterious substances.
Metal-organic framework-based multienzyme cascade bioreactor for sensitive detection of methyl parathion

Dongyan Chen,Li Wang,Jie Wei,Tianhui Jiao,Qingmin Chen,Munetaka Oyama,Quansheng Chen,Xi Chen,Xiaomei Chen

DOI: https://doi.org/10.1016/j.foodchem.2024.138389

2024-06-01

Abstract:In this study, a cascade nanobioreactor was developed for the highly sensitive detection of methyl parathion (MP) in food samples. The simultaneous encapsulation of acetylcholinesterase (AChE) and choline oxidase (CHO) in a zeolitic imidazole ester backbone (ZIF-8) effectively improved the stability and cascade catalytic efficiency of the enzymes. In addition, glutathione-stabilized gold nanoclusters (GSH-AuNCs) were encapsulated in ZIF-8 by ligand self-assembly, conferring excellent fluorescence properties. Acetylcholine (ATCh) is catalyzed by a cascade of AChE/CHO@ZIF-8 as well as Fe(II) to generate hydroxyl radicals (·OH) with strong oxidizing properties. The ·OH radicals then oxidize Au(0) in GSH-AuNCs@ZIF-8 to Au(I), resulting in fluorescence quenching. MP, as an inhibitor of AChE, hinders the cascade reaction and thus restores the fluorescence emission, enabling its quantitative detection. The limit of detection of the constructed nanobioreactor for MP was 0.23 µg/L. This MOF-based cascade nanobioreactor has great potential for the detection of trace hazards.
Metallic Transition Metal Dichalcogenide Nanosheets As an Effective and Biocompatible Transducer for Electrochemical Detection of Pesticide.

Fengnian Zhao,Yao,Xunjia Li,Lingyi Lan,Chengmei Jiang,Jianfeng Ping

DOI: https://doi.org/10.1021/acs.analchem.8b03250

IF: 7.4

2018-01-01

Analytical Chemistry

Abstract:Owing to their large specific surface, favorable electrical conductivity, and excellent electrocatalytic capabilities, two-dimensional transition metal dichalcogenides have received considerable attention in the field of biosensors. On the basis of these properties, we developed a portable and disposable enzyme-based biosensor for paraoxon detection using a metallic MoS2 nanosheets modified screen-printed electrode (SPE). The exfoliated ultrathin metallic MoS2 nanosheets can accelerate the electron transfer on electrode surface and contribute to the immobilization of acetylcholinesterase (AChE) via the cross-linking of glutaraldehyde. Electrodeposited gold nanoparticles (AuNPs) on SPE were used to immobilize MoS2 nanosheets through the interaction between Au atoms on AuNPs and S atoms on MoS2. Using acetylcholine as the substrate, AChE can catalyze the formation of electroactive thiocholine and further generate the redox current. In the presence of paraoxon, the activity of AChE can be inhibited, making the related electrochemical signals weaken. Under the optimized conditions, this electrochemical biosensor exhibited a favorable linear relationship with the concentration of paraoxon from 1.0 to 1000 μg L-1, with the detection limit of 0.013 μg L-1. Furthermore, this developed biosensor was successfully applied to detect paraoxon in pretreated apple and pakchoi samples, which can provide a reliable method for the rapid analysis of organophosphorus pesticides in agricultural products.
Fabrication of Methyl Parathion Electrochemical Sensor Based on Modified Glassy Carbon Electrode with Graphitized and Carboxylated Multi-Walled Carbon Nanotubes Decorated with Zirconia Nanoparticles

Gan Zhu,

DOI: https://doi.org/10.20964/2022.06.75

IF: 1.541

2022-06-01

International Journal of Electrochemical Science

Abstract:Herein, we modified the glassy carbon electrode (GCE) by using the nanocomposite of graphitized and carboxylated multi-walled carbon nanotubes (GR-MWCNTs-COOH) and zirconia (ZrO2) nanoparticles for the fabrication of GR-MWCNTs-COOH/ZrO2/GCE sensor. GR-MWCNTs-COOH had high electrical conductivity, large specific surface area, and good hydrophilicity. ZrO2 nanoparticles possessed strong affinity toward the phosphorus groups on methyl parathion (MP) molecules, which contributes to the enrichment of MP on the modified GCE surface. The fabricated GR-MWCNTs-COOH/ZrO2/GCE sensor exhibited excellent electrochemical sensing performance for the determination of MP due to the synergistic effect of GR-MWCNTs-COOH and ZrO2. Under the optimal conditions, the GR-MWCNTs-COOH/ZrO2/GCE sensor could show a low limit of detection of 0.00135 μM in linear MP concentration range of 0.01-10 μM. Moreover, the fabricated sensor presented good reproducibility, repeatability, and selectivity, which could promote the practical application of MP sensor.

electrochemistry
Molecularly Imprinted Polymer Decorated Nanoporous Gold for Highly Selective and Sensitive Electrochemical Sensors

Yingchun Li,Yuan Liu,Jie Liu,Jiang Liu,Hui Tang,Cong Cao,Dongsheng Zhao,Yi Ding

DOI: https://doi.org/10.1038/srep07699

IF: 4.6

2015-01-01

Scientific Reports

Abstract:Electrochemical nanosensors based on nanoporous gold leaf (NPGL) and molecularly imprinted polymer (MIP) are developed for pharmaceutical analysis by using metronidazole (MNZ) as a model analyte. NPGL, serving as the loading platform for MIP immobilization, possesses large accessible surface area with superb electric conductivity, while electrochemically synthesized MIP thin layer affords selectivity for specific recognition of MNZ molecules. For MNZ determination, the hybrid electrode shows two dynamic linear range of 5 × 10 −11 to 1 × 10 −9 mol L −1 and 1 × 10 −9 to 1.4 × 10 −6 mol L −1 with a remarkably low detection limit of 1.8 × 10 −11 mol L −1 (S/N = 3). In addition, the sensor exhibits high binding affinity and selectivity towards MNZ with excellent reproducibility and stability. Finally, the reliability of MIP-NPGL for MNZ detection is proved in real fish tissue samples, demonstrating the potential for the proposed electrochemical sensors in monitoring drug and biological samples.
Similarities and differences across mental health services providers and practice settings in the United States.

D. J. Knesper,D. J. Pagnucco,J. Wheeler

DOI: https://doi.org/10.1037//0003-066X.40.12.1352

IF: 16.358

1985-12-01

American Psychologist

Abstract:
Direct and specific detection of methyl-paraoxon using a highly sensitive fluorescence strategy combined with phosphatase-like nanozyme and molecularly imprinted polymer

Xuan Zhang,Nan Hao,Shucheng Liu,Kai Wei,Changchang Ma,Jianming Pan,Sheng Feng

DOI: https://doi.org/10.1016/j.talanta.2024.126434

IF: 6.1

2024-09-01

Talanta

Abstract:Methyl paraoxon (MP) is a highly toxic, efficient and broad-spectrum organophosphorus pesticide, which poses significant risks to ecological environment and human health. Many detection methods for MP are based on the enzyme catalytic or inhibition effect. But natural biological enzymes are relatively expensive and easy to be inactivated with a short service life. As a unique tool of nanotechnology with enzyme-like characteristics, nanozyme has attracted increasing concern. However, a large proportion of nanozymes lack the intrinsic specificity, becoming a main barrier of constraining their use in biochemical analysis. Here, we use a one-pot reverse microemulsion polymerization combine the gold nanoclusters (AuNCs) with molecularly imprinted polymers (MIPs), polydopamine (PDA) and hollow CeO2 nanospheres to synthesize the bright red-orange fluorescence probe (CeO2@PDA@AuNCs-MIPs) with high phosphatase-like activity for selective detection of MP. The hollow structure possesses a specific surface area and porous matrix, which not only increases the exposure of active sites but also enhances the efficiency of mass and electron transport. Consequently, this structure significantly enhances the catalytic activity by reducing transport distances. The introduced MIPs provide the specific recognition sites for MP. And Ce (III) can excite aggregation induced emission of AuNCs and enhance the fluorescent signal. The absolute fluorescence quantum yield (FLQY) of CeO2@PDA@AuNCs-MIPs (1.41 %) was 12.8-fold higher than that of the GSH-AuNCs (0.11 %). With the presence of MP, Ce (IV)/Ce (III) species serve as the active sites to polarize and hydrolyze phosphate bonds to generate p-nitrophenol (p-NP), which can quench the fluorescent signal through the inner-filter effect. The as-prepared CeO2@PDA@AuNCs-MIPs nanozyme-based fluorescence method for MP detection displayed superior analytical performances with wide linearities range of 0.45-125 nM and the detection limit of 0.15 nM. Furthermore, the designed method offers satisfactory practical application ability. The developed method is simple and effective for the in-field detection.
Detection of Ethyl Parathion Using Microcantilever Biosensor

Changguo Xue,Tiegui Nan,Shangquan Wu,Zhen Cao,Qingchuan Zhang,Baomin Wang

2012-01-01

Asian Journal of Chemistry

Abstract:A microcantilever biosensor has been developed for label-free detection of ethyl parathion. Through self-assembled monolayer (SAM) method, anti ethyl parathion antibody was immobilized on the gold surface of the microcantilever for the measurement of ethyl parathion. The deflection of the microcantilever corresponding to different ethyl parathion concentration was real time monitored by optical lever technique. The experimental results of non-competitive enzyme-linked immunosorbent assay (ELISA) indicate that anti ethyl parathion antibody on the gold surface can keep the activity. Deflection of microcantilever is linear to ethyl parathion concentration from 500-2000 ng/mL. The limit of detection is 500 ng/mL.
Controlled Immobilization of Acetylcholinesterase on Improved Hydrophobic Gold Nanoparticle/prussian Blue Modified Surface for Ultra-Trace Organophosphate Pesticide Detection.

Shuo Wu,Xiaoqin Lan,Wei Zhao,Yuping Li,Lihui Zhang,Hainan Wang,Mei Han,Shengyang Tao

DOI: https://doi.org/10.1016/j.bios.2011.06.020

IF: 12.545

2011-01-01

Biosensors and Bioelectronics

Abstract:An ultrasensitive amperometric acetylcholinesterase (AChE) biosensor was fabricated by controlled immobilization of AChE on gold nanoparticles/poly(dimethyldiallylammonium chloride) protected Prussian blue (Au-PDDA-PB) nanocomposite modified electrode surface for the detection of organophorous pesticide. The Au-PDDA-PB membrane served as an excellent matrix for the immobilization of enzyme, which not only enhanced electron transfer but also possessed a relatively large surface area. In addition, the surface hydrophilicity of the Au-PDDA-PB nanocomposite was finely controlled in the static water contact angle range of 25.6-78.1° by adjusting the ratio of gold nanoparticles to PDDA-PB. On an optimized hydrophobic surface, the AChE adopts an orientation with both good activity and stability, which has been proven by electrochemical methods. Benefit from the advantages of the Au-PDDA-PB nanocomposite and the good activity and stability of AChE, the biosensor shows significantly improved sensitivity to monocrotophos, a typical highly toxic organophorous pesticide, with wide linear range (1.0-1000 pg/mL and 1.0-10 ng/mL) and an ultra-low detection limit of 0.8 pg/mL. The biosensor exhibits accuracy, good reproducibility and stability. This strategy may therefore provide useful information for the controlled immobilization of protein and the design of highly sensitive biosensors.
Multifunctional integration of biomass-derived porous carbon and zirconium dioxide for electrochemical sensing analysis of methyl parathion

Jiale Han,Mengyuan Zhao,Fang Li,Meimei Guo,Yunhang Liu,Qiwen Ran,Zhankui Wang,Hongyuan Zhao

DOI: https://doi.org/10.1016/j.jfca.2024.106067

IF: 4.3

2024-04-01

Journal of Food Composition and Analysis

Abstract:We developed an economical and environment-friendly technique for preparing the expired mung bean-derived porous carbon (EMBPC), which possessed large specific surface area and 3D interlinked carbon conductive network. Zirconium dioxide (ZrO2) nanoparticles were further incorporated into the porous structure of EMBPC to form the EMBPC@ZrO2 composite, which was served as electrode sensitizer for the fabrication of EMBPC@ZrO2/GCE sensor. EMBPC exhibited superior conductivity property and large electroactive area, which helped enhance the charge transfer efficiency between electrolyte and sensing electrode. ZrO2 nanoparticles with good biocompatibility achieved the efficient adsorption of methyl parathion (MP) owing to the recognition of ZrO2 towards the phosphate groups of MP. Furthermore, EMBPC with porous carbon conductive structure could make up for the inherent disadvantage of ZrO2 nanoparticles in the term of electrical conductivity. The EMBPC@ZrO2/GCE sensor achieved the highly sensitive MP detection (LOD: 8.77 nM) in linear MP concentration range of 0.01–10 μM. The satisfactory practical property was realized at the EMBPC@ZrO2/GCE sensor with satisfactory recovery rates of 91.95–124.72% and low RSD% of 1.21–3.35% for the electrochemical detection of MP in food samples.

food science & technology,chemistry, applied
A Rapid and Easy Procedure of Enzyme Biosensor based on Nitrogen-Doped Graphene for Detection of Methyl Parathion in CHM

Bolu Sun,Shixing Yu,Quhuan Ma,Hongxia Shi,Qiaoning Dang,Yuhong Liu,Jiali Hu,Liangrong Bao,Lin Yang,Xiaofeng Shi

DOI: https://doi.org/10.1149/1945-7111/ad31f0

IF: 3.9

2024-03-20

Journal of The Electrochemical Society

Abstract:Methyl parathion (MP), an organophosphorus pesticide that is frequently used to control pests during the planting process of Chinese herbal medicine (CHM), has been used without sufficient control, leading to excessive residues on the surface of CHM, which has a serious impact on the quality and safety of CHM and their preparations. Consequently, it is crucial to carefully control MP during the cultivation, processing, and manufacture of CHM. Based on this, nitrogen-doped graphene (N-Gr) with a high conductivity and chitosan (CS) with good stability were used to modify the glassy carbon electrode (GCE). Subsequently, the prussian blue (PB) with catalytic activity and gold nanoparticles (AuNPs) with excellent biocompatibility were deposited by the electrodeposition method to form the AuNPs/PB/CS@N-Gr/GCE. Then, the acetylcholinesterase (AChE) was effectively immobilized on the electrode surface by covalent bonding between AuNPs and AChE through gold-sulfhydryl bonds. Finally, a rapid and easy procedure of enzyme biosensor (AChE/AuNPs/PB/CS@N-Gr/GCE) for sensitive detection of MP pesticide residues was fabricated. Herein, PB catalyzes the redox reaction of thiocholine, which is produced when acetylthiocholine iodide (ATCHI) undergoes efficient hydrolysis catalyzed by AChE. This process effectively promoted electron transfer, amplifying the sensor's response signal. After the experimental conditions are optimized, the limit of detection (LOD) for MP is found to be 9.47 × 10 −5 μg ml −1 . Exhibits a good linear relationship within the concentration range of 1 × 10 −3 μg ml −1 ∼ 1 × 10 1 μg ml −1 . Significantly, the fabricated enzyme biosensor excels in swiftly and sensitively detecting trace amounts of MP in real examples. Furthermore, it exhibits robust stability and reproducibility. The excellent performance of this enzyme biosensor not only offers a rapid and easy way to identify and find minute amounts of trace MP pesticide residues in CHM, but also serves as a technical guide for the creation of new, portable, and on-site pesticide residue detection technology for law enforcement.

electrochemistry,materials science, coatings & films
Surface plasmon resonance enhanced real-time photoelectrochemical protein sensing by gold nanoparticle-decorated TiO₂ nanowires.

Peimei Da,Wenjie Li,Xuan Lin,Yongcheng Wang,Jing Tang,Gengfeng Zheng

DOI: https://doi.org/10.1021/ac501406x

IF: 7.4

2014-01-01

Analytical Chemistry

Abstract:Recently developed photoelectrochemical (PEC) sensing systems represent a unique potential detection method for real-time analysis of chemical/biological molecules, while the low absorption of TiO2 nanomaterials in the visible wavelength region and the slow surface charge transfer efficiency limit the ultimate sensitivity. Here we develop a gold nanoparticle-decorated TiO2 nanowire sensor for PEC detection of protein binding. The direct attachment of Au nanoparticles to TiO2 nanowires offers strong surface plasmon resonance for electrochemical field effect amplification, yielding a similar to 100% increase of photocurrent density. In addition, the surface functionalization of gold nanoparticles allows for direct capturing of target proteins near the Au/TiO2 interface and thus substantially enhances the capability of attenuation of energy coupling between Au and TiO2, leading to much-improved sensor performance. As a proof of concept, cholera toxin subunit B has been robustly detected by the TiO2-Au nanowire sensor functionalized with ganglioside GM!, with a high sensitivity of 0.167 nM and excellent selectivity. Furthermore, the real-time feature of photoelectrochemical sensing enables direct measurement of binding kinetics between cholera toxin subunit B and GM!, yielding association and disassociation rate constants and an equilibrium constant K-d of 4.17 nM. This surface plasmon resonance-enhanced real-time, photoelectrochemical sensing design may lead to exciting biodetection capabilities with high sensitivity and real-time kinetic studies.
Non-Enzymatic Methyl Parathion Electrochemical Sensor Based on Hydroxyl Functionalized Ionic Liquid/Zeolitic Imidazolate Framework Composites Modified Glassy Carbon Electrode

Yutong Li,Chao Du,Xinsheng Liu,Kai Wang,Huifang Yang,Yonghong Li

DOI: https://doi.org/10.1149/1945-7111/ac13d4

IF: 3.9

2021-07-01

Journal of The Electrochemical Society

Abstract:A non-enzymatic methyl parathion (MP) electrochemical sensor was fabricated based on hydroxyl functionalized ionic liquid/zeolitic imidazolate framework composites modified glassy carbon electrode (IL-ZIF-67/GCE). Scanning electron microscopy (SEM) was used to study the surface morphologies of the modified electrodes. ZIF-67 could be well dispersed by hydroxyl functionalized ionic liquid. The structures of the modification materials were characterized using Fourier transform infrared spectroscopy (FT-IR). Square wave voltammetry (SWV) was employed to investigate the electrochemical behavior of MP. The factors affecting the performance of the proposed sensor were also optimized. The sensor makes full use of the high conductivity of hydroxyl functionalized IL and the superior electrocatalytic activity of ZIF-67, exhibiting excellent selectivity and stability. Under the optimal conditions, the IL-ZIF-67/GCE showed a good linear relationship for MP in the range of 1–20 ng l−1, and the detection limit was as low as 0.5 ng l−1 (S/N = 3). The sensor was applied for the detection of MP in river water samples, and the sample recoveries ranged from 96.6% to 101.2%.

electrochemistry,materials science, coatings & films
Highly sensitive electrochemical determination of methyl parathion based on Ketjenblack carbon@cerium dioxide nanocomposite with pearl chain–like carbon conductive network

Nan Hu,Gan Zhu,Fang Li,Qiwen Ran,Hongyuan Zhao

DOI: https://doi.org/10.1007/s11581-023-05075-y

IF: 2.961

2023-06-08

Ionics

Abstract:Herein, we reported the ultrasound-assisted preparation of Ketjenblack carbon@cerium dioxide (KBC@CeO 2 ) nanocomposite as modification material for the fabrication of highly sensitive methyl parathion (MP) electrochemical sensor (KBC@CeO 2 /GCE). For the KBC@CeO 2 nanocomposite, KBC nanoparticles constructed a three-dimensional (3D) interconnected pearl chain–like carbon conductive network structure with excellent electrical conductivity due to the point-point close connection of carbon nanoparticles, which provided highly conductive charge transport channels. Moreover, CeO 2 nanoparticles could promote the high enrichment of MP molecules due to the good affinity ability. The combination of KBC and CeO 2 nanoparticles effectively improved the MP detection performance of the KBC@CeO 2 /GCE sensor. The low limit of detection (LOD) of 1.8 nM could be realized at the fabricated MP electrochemical sensor in a two-stage linear MP concentration range of 0.01–10 μM, respectively. In addition, the fabricated sensor exhibited good repeatability, reproducibility, and anti-interference performance. The KBC@CeO 2 /GCE sensor could present low relative standard deviation (RSD) of 0.97–3.99% and satisfactory recoveries of 95.23–103.3% for the detection of MP in tap water and oolong tea samples.

chemistry, physical,physics, condensed matter,electrochemistry

A Molecularly Imprinted Electrochemical Enzymeless Sensor Based on Functionalized Gold Nanoparticle Decorated Carbon Nanotubes for Methyl-Parathion Detection

A robust electrochemical sensing platform using carbon paste electrode modified with molecularly imprinted microsphere and its application on methyl parathion detection

Determination of methyl parathion by solid-phase extraction on an ionic liquid–carbon nanotube composite electrode

VXC-72R/ZrO2/GCE-Based Electrochemical Sensor for the High-Sensitivity Detection of Methyl Parathion

Gold Nanoclusters Anchored Manganese Dioxide Nanocomposites with High Structural Stability for Sensitive Detection of Methyl Parathion

Electrochemical Organophosphorus Pesticide Detection Using Nanostructured Gold-Modified Electrodes

Development of a novel optical biosensor for detection of organophosphorus pesticides based on methyl parathion hydrolase immobilized by metal-chelate affinity.

Molecularly Imprinted Poly(thionine)-Based Electrochemical Sensing Platform for Fast and Selective Ultratrace Determination of Patulin

Metal-organic framework-based multienzyme cascade bioreactor for sensitive detection of methyl parathion

Metallic Transition Metal Dichalcogenide Nanosheets As an Effective and Biocompatible Transducer for Electrochemical Detection of Pesticide.

Fabrication of Methyl Parathion Electrochemical Sensor Based on Modified Glassy Carbon Electrode with Graphitized and Carboxylated Multi-Walled Carbon Nanotubes Decorated with Zirconia Nanoparticles

Molecularly Imprinted Polymer Decorated Nanoporous Gold for Highly Selective and Sensitive Electrochemical Sensors

Similarities and differences across mental health services providers and practice settings in the United States.

Direct and specific detection of methyl-paraoxon using a highly sensitive fluorescence strategy combined with phosphatase-like nanozyme and molecularly imprinted polymer

Detection of Ethyl Parathion Using Microcantilever Biosensor

Controlled Immobilization of Acetylcholinesterase on Improved Hydrophobic Gold Nanoparticle/prussian Blue Modified Surface for Ultra-Trace Organophosphate Pesticide Detection.

Multifunctional integration of biomass-derived porous carbon and zirconium dioxide for electrochemical sensing analysis of methyl parathion

A Rapid and Easy Procedure of Enzyme Biosensor based on Nitrogen-Doped Graphene for Detection of Methyl Parathion in CHM

Surface plasmon resonance enhanced real-time photoelectrochemical protein sensing by gold nanoparticle-decorated TiO₂ nanowires.

Non-Enzymatic Methyl Parathion Electrochemical Sensor Based on Hydroxyl Functionalized Ionic Liquid/Zeolitic Imidazolate Framework Composites Modified Glassy Carbon Electrode

Highly sensitive electrochemical determination of methyl parathion based on Ketjenblack carbon@cerium dioxide nanocomposite with pearl chain–like carbon conductive network