Abstract:The flow characteristics of an oscillating flow including porous media are very important for designing oscillating-flow-based devices. A combined experimental and simulation study is carried out to provide a comprehensive quantitative understanding of the oscillating flows. The cycle rate through porous media, a particularly basic parameter, is proposed based on the dimensionless pressure drop as a correction factor for the similarity parameters of the oscillating flows. A modified dimensionless fluid displacement is introduced based on the cycle rate, and a correlation equation is proposed to calculate the cycle-averaged friction factor of porous media. Significant phase difference (7-71 degrees) is observed between the movements of gas inside porous media and pistons, which increases with the increasing pressure drop of porous media. Another correlation equation is proposed to predict the phase difference. It should be noted that the pressure drop of porous media would also affect the flows inside other heat exchangers between cylinder and porous media. The mass flow rate next to the cylinder is very different from that adjacent to the porous media in terms of amplitude and phase difference. Mass flow rates at different cross sections vary linearly with the volume between the piston upper surface and the monitored cross section. Finally, a quantitative method is proposed to describe the flow characteristics of an oscillating flow including porous media, which is expected to improve the design methods of oscillating-flow based devices. (C) 2017 Elsevier Ltd. All rights reserved.

Method for Resultant and Calculating the Flow-Rate Characteristics of Pneumatic Circuit

Research on Flow Rate Characteristics Measurement System for Pneumatic Components

Study on Flow Field in Capacity Regulating Actuator for Reciprocating Compressor

Research on the Flow Path Design Method of Axial Flow Compressor of Gas Turbine

Pneumatic Resistance Network Analysis and Dimension Optimization of High Pressure Electronic Pneumatic Pressure Reducing Valve

Calculation of Flow Field and Heat Transfer in Typical Pneumatic Circuit

Research and Development of A Test System for the Dynamic Performance Testing of Pneumatic Solenoid Valves

Study and Suggestions on Pneumatic Component Flow-rate Characteristics

Identification of Characteristic Parameters and Structure Parameters in Pneumatic Servo Control

The Calculation of a Pneumatic System Flow Field with the Pipe Channel Characteristic being Taken into Account

A Quantitative Method to Describe the Flow Characteristics of an Oscillating Flow Including Porous Media

Measurement of flow rate characteristics of pneumatic components based on the dynamic regularity of polytropic exponents

Calculation of Two-dimensional Unsteady Flow Field of Pneumatic System

A New Method for Calculating the Sonic Conductance of Airflow Through A Short-Tube Orifice

Identification of the Flow-Rate Characteristics of A Pneumatic Valve by the Instantaneous Polytropic Exponent

New Advances in Airflow Measurements Applied in Airflow Characteristics Test of Pneumatic Components

A Double-Tank Method for the Identification of Pneumatic Valves' Flow-Rate Characteristics

Study on Measuring Flow Rate Characteristics of Pneumatic Solenoid Valves by Isothermal Chamber Discharge

The Calculation Of Two-Dimension Viscous Flow Field In Tube Of Pneumatic System

Numerical Simulation of the Gas-Solid Flow Around the Valve of Pneumatic Conveying System

Numerical Calculation and Experimental Study on Response Characteristics of Pneumatic Solenoid Valves