Abstract:Nickel-rich LiNi x Mn y Co 1−x−y O 2 (NMC, with x ≥ 0.6) layered oxides are regarded as cathode candidates for high-energy density lithium-ion batteries (LIBs). However, this technology faces several challenges due to the scarcity of crucial raw materials such as cobalt precursors and the negative environmental impact of their extraction process. It is therefore, it becomes imperative to develop low cobalt content cathode compositions that offer alternative options with comparable electrochemical performance. Herein, we have used a systematic approach to modify the composition while keeping all other properties (particle size and morphology) constant to synthesise low-Co-cathode materials, namely LiNi 0·8 Mn 0·1 Co 0·1 O 2 (NMC-10 %) and LiNi 0·8 Mn 0·15 Co 0·05 O 2 (NMC-5%). A co-precipitation route using a continuous stirred thank reactor was used for synthesis. The physico-chemical properties, electrochemical performances, cycling stability, and rate capabilities of NMC-5% materials are comparable to those of NCM-10 % materials. NMC-10 % and NMC-5% half cells show initial specific discharge capacities of 191 mAh.g −1 , and 185 mAh.g −1 , respectively, in a voltage range of 2.8–4.3 V ( vs. Li + /Li). The NMC-5% exhibits excellent thermal stability, characterized by a predominant exothermic peak at 432 °C and significantly lower total heat energy when compared to NMC-10 % counterpart, which displayed its main exothermic peak at 339 °C. The structural and electronic changes of both materials were evaluated through in operando synchrotron-based X-ray techniques. Regardless of the cobalt content, both materials show comparable structural and electronic evolution upon the de-intercalation/intercalation of Li + ions. An irreversible phase transition at the first delithiation was observed as emphasized by diffraction of synchrotron radiations.

X‐ray Absorption Spectroscopy Investigation of Lithium‐Rich, Cobalt‐Poor Layered‐Oxide Cathode Material with High Capacity

Surface Analysis of the Lithium-Rich Cathode Material Li<sub>1.2</sub>Mn<sub>0.54</sub>Co<sub>0.13</sub>Ni<sub>0.13</sub>Na<sub><i>x</i></sub>O<sub>2</sub> by Advanced Electron Microscopy

Direct Observation of Reductive Coupling Mechanism between Oxygen and Iron/Nickel in Cobalt‐Free Li‐Rich Cathode Material: An in Operando X‐Ray Absorption Spectroscopy Study

Anionic Redox Reaction and Structural Evolution of Ni-rich Layered Oxide Cathode Material

Decoupling the Roles of Ni and Co in Anionic Redox Activity of Li-rich NMC Cathodes.

Revealing Roles of Co and Ni in Mn‐Rich Layered Cathodes

Probing the Thermal-Driven Structural and Chemical Degradation of Ni-Rich Layered Cathodes by Co/Mn Exchange

Understanding the Origin of Li2MnO3 Activation in Li‐Rich Cathode Materials for Lithium‐Ion Batteries

Lithium/Oxygen Incorporation and Microstructural Evolution During Synthesis of Li-Rich Layered Li[Li0.2Ni0.2Mn0.6]O-2 Oxides

Tuning Electrochemical Properties of Li-Rich Layered Oxide Cathodes by Adjusting Co/Ni Ratios and Mechanism Investigation Using in Situ X-ray Diffraction and Online Continuous Flow Differential Electrochemical Mass Spectrometry

Probing Depth-Dependent Transition-Metal Redox of Lithium Nickel, Manganese, and Cobalt Oxides in Li-Ion Batteries

Preparation and Electrochemical Performance of Li-rich Layered Cathode Material, Li[Ni0.2Li0.2Mn0.6]O2, for Lithium-Ion Batteries

Investigation on the Electrochemical Activation Process of Li1.20Ni0.32Co0.004Mn0.476O2

Development and understanding of the lithiation/de-lithiation mechanism of a low cobalt and nickel-rich cathode material for lithium‐ion batteries

Synergistic Effects of Ni 2+ and Mn 3+ on the Electrochemical Activation of Li 2 MnO 3 in Co-Free and Ni-Poor Li-Rich Layered Cathodes

Modification of Li-Rich Layer-Structured Cathode Materials by Supercritical Co2 Fluid

Structural and electrochemical characterization of Li 1.2 Ni x Co x Mn 0.8 − 2 x O 2 ( x = 0.128, 0.16, and 0.2) as cathode materials for lithium-ion batteries

Unraveling the Cationic and Anionic Redox Reactions in a Conventional Layered Oxide Cathode

High Performance Lithium-Manganese-rich Cathode Material with Reduced Impurities

Electrochemical Activation, Voltage Decay and Hysteresis of Li-rich Layered Cathode Probed by Various Cobalt Content

Electrochemical Properties of Li-Riched Li[Li<sub>0.2</sub>Co<sub>0.4</sub>Mn <sub>0.4</sub>]O<sub>2</sub> Cathode Material for Lithium Ion Batteries