Abstract:Studies on the relationship between resistivity and dynamic rheological properties of carbon black-filled high-density polyethylene (CB/HDPE) composites were carried out. Change of resistivity rho is associated with the dynamic modulus before the positive temperature coefficient/negative temperature coefficient (PTC/NTC) temperature. When the temperature approaches the melting point of HDPE, rho increases rapidly with a decreasing modulus, corresponding to PTC transition. The resistivity-dynamic viscoelasticity relationship in the PTC region can be divided into two parts in which the changes of rho with storage modulus G' and loss modulus G" can be described by the scaling laws given by the critical storage modulus and loss modulus G' (c), and G" (c); adjustable parameters rho'(1c), rho'(2c), rho"(1c) and rho"(2c); and nonlinear exponents n and m, respectively. The accordance between the experimental data and the scaling functions of the dimensionless quantities (G'/G'(c) - 1) and (G"/G"(c) - 1) in the PTC transition region suggests that the rho jump may be the result of a modulus-induced percolation. G'(c) and G"(c) increase, but the four scaling resistivitis, rho'(1c), rho'(2c), rho"(1c), and rho"(2c), decrease with increasing CB concentration, implying that the microstructure change of the composites is the determinant factor for the PTC behavior and the resistivity-dynamic modulus relationship. However, rho'(2c) and rho"(2c) exhibit no scaling dependence. It is suggested that a threshold concentration exists for the modulus of the composites on the basis of examining the plot of both G'(c) and G"(c) against CB concentration. The scaling laws G' similar to Phi(x) and G" similar to Phi(y) hold for the concentration dependence of the critical modulus when Phi > Phi(c) and the estimated values of x and y are 1.10 +/- 0. 10 and 0.89 +/- 0.29, respectively. The resistivity-dynamic modulus can shift to form a master curve. The horizontal factors a(G') and a(G") and the vertical factors a' and a" are relevant to the concentration dependence of the dynamic modulus or PTC behavior. It is believed that the former would be involved in changing the mechanical microstructure formed by the complicated interaction of CB particle and polymer segments, and the latter would be involved in the overall changes of conducting a network during the PTC transition region. (C) 2003 Wiley Periodicals, Inc.

Modification of Kerner-Nielson Equation and Correlation Between Electrical Percolation and Viscoelastic Percolation in CB/HDPEConductive Composites

Estimation of the Agglomeration Structure for Conductive Particles and Fiber-Filled High-Density Polyethylene Through Dynamic Rheological Measurements

Correlation Between Percolation Behavior of Electricity and Viscoelasticity for Graphite Filled High Density Polyethylene

Relationship Between Electrical Conductive and Rheological Percolations for Fibres/Hdpe Composites

Reversible Nonlinear Conduction Behavior for High‐density Polyethylene/graphite Powder Composites Near the Percolation Threshold

Nonlinear Conductive Properties and Scaling Behavior of Conductive Particle Filled High-Density Polyethylene Composites

Landau Mean-Field Approximation of Percolation in Conductive Polymer Composites

Thermal-induced Percolation in High-Density Polyethylene/carbon Black Composites

Relationship Between the Positive Temperature Coefficient of Resistivity and Dynamic Rheological Behavior for Carbon Black‐filled High‐density Polyethylene

Impedance Spectra of Carbon Black Filled High-Density Polyethylene Composites

Rheological Properties and Percolation of High-Density Polyethylene Filled with Graphites Having Different Topological Parameters

Physics-Based Modeling and Experimental Study of Conductivity and Percolation Threshold in Carbon Black Polymer Nanocomposites

Modeling of Effective Electrical Conductivity and Percolation Behavior in Conductive-Polymer Nanocomposites Reinforced with Spherical Carbon Black

Temperature and time dependence of conductive network formation: Dynamic percolation and percolation time

Morphology and physical properties of composites based on high-density polyethylene/propylene-ethylene random copolymers blends and carbon black

A universal approach of modelling the dielectric behaviors of percolative composite ceramics and thin films

Conduction Stability of High-Density Polyethylene/Carbon Black Composites Due to Electric Field Action

Characterization of Percolation Behavior in Conductor–dielectric 0-3 Composites

PLA/CB and HDPE/CB conductive polymer composites: Effect of polymer matrix structure on the rheological and electrical percolation threshold

ELECTRICAL PROPERTIES OF MULTIWALLED CARBON NANOTUBE/CARBON BLACK HYBRID FILLER FILLED POLYOXYMETHYLENE COMPOSITES

Physical Properties of Composites Near Percolation