Abstract:Utilising cooling stimulation as a thermal excitation means has demonstrated profound capabilities of detecting sub-surface metal loss using thermography. Previously, a prototype mechanism was introduced which accommodates a thermal camera and cooling source and operates in a reciprocating motion scanning the test piece while cold stimulation is in operation. Immediately after that, the camera registers the thermal evolution. However, thermal reflections, non-uniform stimulation and lateral heat diffusions will remain as undesirable phenomena preventing the effective observation of sub-surface defects. This becomes more challenging when there is no prior knowledge of the non-defective area in order to effectively distinguish between defective and non-defective areas. In this work, the previously automated acquisition and processing pipeline is re-designed and optimised for two purposes: 1-Through the previous work, the mentioned pipeline was used to analyse a specific area of the test piece surface in order to reconstruct the reference area and identify defects. In order to expand the application of this device over the entire test area, regardless of its extension, the pipeline is improved in which the final surface image is reconstructed by taking into account multiple segments of the test surface. The previously introduced pre-processing method of Dynamic Reference Reconstruction (DRR) is enhanced by using a more rigorous thresholding procedure. Principal Component Analysis (PCA) is then used in order for feature (DRR images) reduction. 2-The results of PCA on multiple segment images of the test surface revealed different ranges of intensities across each segment image. This potentially could cause mistaken interpretation of the defective and non-defective areas. An automated segmentation method based on Gaussian Mixture Model (GMM) is used to assist the expert user in more effective detection of the defective areas when the non-defective areas are uniformly characterised as background. The final results of GMM have shown not only the capability of accurately detecting subsurface metal loss as low as 37.5% but also the successful detection of defects that were either unidentifiable or invisible in either the original thermal images or their PCA transformed results.

He Application of Real-time Imaging Detection Technology in the Detection of Aluminum Casting Parts

Research on Ultrasonic Detection of Complex Surfaces

Approaches for Accuracy Improvement of the X-ray Image Defect Detection of Automobile Casting Aluminum Parts Based on Deep Learning

Approach for Automatic Defect Detection in Aluminum Casting X-Ray Images Using Deep Learning and Gain-Adaptive Multi-Scale Retinex

Investigation of industrial die-cast Al-alloys using X-ray micro-computed tomography and machine learning approach for CT segmentation

Aluminum Casting Inspection using Deep Object Detection Methods and Simulated Ellipsoidal Defects

Interactive Defect Segmentation in X-Ray Images Based on Deep Learning

Automated Porosity Characterization for Aluminum Die Casting Materials Using X-ray Radiography, Synthetic X-ray Data Augmentation by Simulation, and Machine Learning

A transmission-type pinhole detection system for high-speed aluminum foil

The Automatic Detection System Development of Aluminum Production Line Quality

Real-time Automatic Detection of Weld Defects in X-ray Images

Aluminum Product Surface Defect Detection Method Based on Improved CenterNet

Application of A New Image Segmentation Method to Detection of Defects in Castings

Nondestructive Detection Of The Internal Quality Of Apple Using X-Ray And Machine Vision

Research on Online Monitoring Technology and Filtration Process of Inclusions in Aluminum Melt

Defects Detection for Casting of Railway Freight Car Using X-Ray Radiography

High-performance surface defect detection of aluminum substrate based on event camera

The Application of the Acoustic Emission in the Online Detection of Fine Blanking Mold Chipping

An Automated Pipeline for Dynamic Detection of Sub-Surface Metal Loss Defects across Cold Thermography Images

Eddy Current Technology in the Application of Defect Testing to Aluminum Profile

Development of Detection Method for Mould Transient Heat Transfer in Continuous Casting