Abstract:A steel–concrete composite beam bridge fully exploits the mechanical advantages of the concrete structure and steel structure, and has the advantages of a fast construction speed and large stiffness. It is of certain research value to explore the application of this bridge type in the field of railway bridges. However, with the rapid development of domestic high-speed railway construction, the problem of vibration and noise radiation of high-speed railway bridges caused by train loads is becoming more and more serious. A steel–concrete composite beam bridge combines the tensile characteristics of steel and the compressive characteristics of concrete perfectly. At the same time, it also has the characteristics of a steel bridge and concrete bridge in terms of vibration and noise radiation. This feature makes the study of the vibration and noise of the bridge type more complicated. Therefore, in this paper, the characteristics of vibration and noise radiation of a high-speed railway steel–concrete composite box girder bridge are studied in detail from two aspects: the theoretical basis and a numerical simulation. The main results obtained are as follows: Relying on the idea of vehicle–rail–bridge coupling dynamics, a structural dynamics analysis model of a steel–concrete combined girder bridge for a high-speed railroad was established, and numerical program simulation of the vibration of the vehicle–rail–bridge coupling system was carried out based on the parametric design language of ANSYS 18.0 and the language of MATLAB R2021a, and the structural vibration results were analyzed in both the time domain and frequency domain. By using different time-step loading for the vehicle–rail–bridge coupling vibration analysis, the computational efficiency can be effectively improved under the condition of guaranteeing the accuracy of the result analysis within 100 Hz. Based on the power flow equilibrium equation, a statistical energy method of calculating the high-frequency noise radiation is theoretically derived. Based on the theoretical basis of the statistical energy method, the high-frequency noise in the structure is numerically simulated in the VAONE 2021 software, and the average contribution of the concrete roof plate to the three acoustic field points constructed in this paper is as high as 50%, which is of great significance in the study of noise reduction in steel–concrete composite girders.

Estimation of Vibration Power Flow to and Sound Radiation from a Railway Concrete Viaduct Due to Vehicle/Track Interaction

Study on low-frequency noise radiated from steel multi-box girder bridge induced by traffic vibration

Theoretical analysis of low-frequency noise radiated from bridge vibrations

Assessment on Transient Sound Radiation of a Vibrating Steel Bridge Due to Traffic Loading

Assessment of Sound Pressure of Transient Noise Radiated from Vehicle-Bridge Coupling Vibration

Analysis on Low-Frequency Noise Induced by Vehicle-Bridge Coupling Vibration

Acoustic Radiation Study of a Box Girder Viaduct Considering the Frequency-Dependent Viscoelasticity of the Rail Pad

A Theoretical Investigation on Influences of Slab Tracks on Vertical Dynamic Responses of Railway Viaducts

The Measurement And Analysis On The Structure-Borne Noise Of Concrete Box Girder

Prediction and mitigation analysis of ground vibration caused by running high-speed trains on rigid-frame viaducts

Vibration Characteristics of Damping Pad Floating Slab on the Long-Span Steel Truss Cable-Stayed Bridge in Urban Rail Transit

Comparison of time-domain and frequency-domain models for vibration prediction of a rail transit viaduct paved with floating slab track

Vibro-acoustic characteristics of a rail transit viaduct paved with trapezoidal sleeper track

A Combination Strategy of Hollow-Closed-wall In-Filled Trench and Elastic Bearing for Reducing Environmental Vibration Induced by High-Speed Train

Low-frequency noise radiation from traffic-induced vibration of steel double-box girder bridge

Analysis of Viaduct-Ground Vibrations Due to High-Speed Train Moving Loads

Applying constrained layer damping to reduce vibration and noise from a steel-concrete composite bridge: An experimental and numerical investigation

Comparison of vibration and noise characteristics of urban rail transit bridges with box-girder and U-shaped sections

Vibrational Energy Properties of Twin-Block Ballastless Track with Anti-vibration Structure on Bridge by Power Flow Analysis

Investigation of the effect of vibration-reducing tracks on the vibration and noise from a large-span steel bridge

Study on Vibration and Noise of Railway Steel–Concrete Composite Box Girder Bridge Considering Vehicle–Bridge Coupling Effect