Abstract:Ozone is an effective oxidant and disinfectant commonly used for elimination of micropollutants and inactivation of resistant microbes. However, undesirable oxidation/disinfection byproducts such as bromate might form during ozonation. In this study, the UV absorbance and fluorescence indices were applied as surrogate indicators for predicting the inactivation of bacteria and formation of bromate during ozonation of water and wastewater effluents. The inactivation efficiencies of lab-cultured Escherichia coli (E. coli) and autochthonous bacteria were measured by plating (for E. coli only) and flow cytometry with fluorescence staining. During ozonation of E. coli spiked into wastewater effluents (similar to 10(6) cell/mL), the priority of inactivation efficiency determined by different cell viability methods were in the order of CFU > membrane damage > DNA damage. Approximately, 99% membrane damage and/or 90% DNA damage are conservatively supposed as an indicator for sufficient bacterial inactivation as well as degradation of antibiotic resistance genes. The related required O-3 dosing thresholds for sufficient inactivation of E. coli and autochthonous bacteria refer to similar to 0.6 O-3/DOC (g/g), similar to 50% decrease of UVA254, similar to 60% decrease of UVA280, or similar to 80% decrease of humic-like fluorescence. Within the range of 10(6)-10(8) cell/mL the bacterial concentration did not have significant effects on the required thresholds of the specific O-3 doses or spectroscopic indicators required for bacterial inactivation. The addition of 50 mM tert-BuOH as center dot OH scavenger increased the required specific ozone doses but decreased the losses of spectroscopic indicators necessary for sufficient bacterial inactivation, and also suggested that the membrane/DNA damages for bacterial inactivation were mainly attributed to the direct O-3 attacks. The bromate concentration was determined using ion chromatography with MS/MS detection. The results showed that when O-3 was dosed at the required thresholds for sufficient bacterial inactivation, bromate formation could usually be suppressed below 10 mu g/L. The present work supports that it is possible to reach a balance between bacterial inactivation and bromate formation. (C) 2018 Elsevier Ltd. All rights reserved.

Removal and Inactivation of Virus by Drinking Water Treatment in the Presence of Bromide or Iodide

Bacterial Community Structure and Microorganism Inactivation Following Water Treatment with Ferrate(Vi) or Chlorine

The Virus Removal in UV Irradiation, Ozonation and Chlorination

Kinetics and Mechanisms of Virus Inactivation by Chlorine Dioxide in Water Treatment: A Review

Applying UV Absorbance and Fluorescence Indices to Estimate Inactivation of Bacteria and Formation of Bromate During Ozonation of Water and Wastewater Effluent

Removal of waterborne phage and NO3− in the nZVI/phage/NO3− system: competition effect

Removal Technologies of Bromate in Drinking Water

The inactivation of bacteriophage MS2 by sodium hypochlorite in the presence of particles

Inactivation of the Chlorine-resistant Bacteria Isolated from the Drinking Water Distribution System

Degradation and Detoxification of Microcystin-Lr in Drinking Water by Sequential Use of UV and Ozone

Anion-exchange resin adsorption followed by electrolysis: A new disinfection approach to control halogenated disinfection byproducts in drinking water

Removing bacteria contaminants from raw surface water using multiple barriers pilot-scale reactor: sand filtration, activated carbon, and advanced oxidation processes

Pilot testing and engineering application of O3/H2O2 process for 2-methylisoborneol and geosmin removal in drinking water treatment

Pilot Testing and Engineering Application of O 3 /H 2 O 2 Process for 2-Methylisoborneol and Geosmin Removal in Drinking Water Treatment

Chlorine-resistant bacteria in drinking water: Generation, identification and inactivation using ozone-based technologies

Phage MS2 Inactivation in Pure and Filtered Water: Effect of Pseudo-Kinetics and Other Factors

Removal of viruses and disinfection by-products at two drinking water treatment plants in southern China

Viral inactivation using microwave-enhanced membrane filtration

Moderate Pre-Ozonation Coupled with a Post-Peroxone Process Remove Filamentous Cyanobacteria and 2-MIB Efficiently: from Bench to Pilot-Scale Study.

Ozonation of iodide-containing waters: selective oxidation of iodide to iodate with simultaneous minimization of bromate and I-THMs

Systematic Investigation and Modeling Prediction of Virus Inactivation by Ozone in Wastewater: Decoupling the Matrix Effects