Abstract:In‐situ preparation of modified‐HNTs/thermoset nanocomposites via thiol‐epoxy click chemistry. In the current study, thermoset nanocomposites including halloysite nanotubes (HNTs) have been prepared through thiol‐epoxy click reaction at ambient conditions. Naturally available HNTs are first modified separately by epoxy and thiol groups and used as nanofillers in a mixture of trimethylolpropane triglycidyl ether and trimethylolpropane tris(3‐mercaptopropionate) ranging from 0 to 5 wt%. Fourier transformed infrared (FT‐IR) spectroscopy has been used to observe the characteristic bands of the pure and modified halloysite, neat thermoset, and HNT/thermoset nanocomposites. Thermal properties of epoxide‐modified and thiol‐modified halloysite nanotubes and also final thermoset nanocomposites have been investigated using thermogravimetric analysis (TGA) by comparing pure halloysite and neat thermoset, respectively. The dispersion of HNT nanotubes in thermoset matrix has been examined with scanning electron microscopy (SEM). In addition to the agglomerated/non‐agglomerated distribution, the present of HNT has been proved by EDX. The effect of HNT‐Epoxide and HNT‐Thiol loadings on mechanical properties has been examined by tensile test. All nanocomposites were found to exhibit better tensile strength than that of neat thermoset, called as reference sample. The most enhanced mechanical properties have been detected in the nanocomposite with 3% modified‐HNTs by weight because of the best dispersion, which promotes effective interactions between the nanotubes and thermoset matrix. Tensile strength of thermoset nanocomposites increased by 43% and 62%, while elongation at break increased by 58% and 149% when 3 wt% HNT‐Epoxide and 3 wt% HNT‐Thiol were added to the matrix, respectively. Further increase of HNT added to the matrix causes agglomeration of nanotubes and thus deterioration of mechanical properties. Highlights Pure HNT was modified and successfully converted into HNT‐Epoxide and HNT‐Thiol. In‐situ preparation of thermoset nanocomposites with modified‐HNTs was effectively achieved via thiol‐epoxy click chemistry. Mechanical properties increased significantly with both HNT‐Epoxide and HNT‐Thiol loading ratio up to 3 wt%. The presence and agglomerated/non‐agglomerated dispersion of modified‐HNTs in the thermoset matrix were verified by SEM–EDX analysis.

Chemical functionalization for improving dispersion and interfacial bonding of halloysite nanotubes in epoxy nanocomposites

Functionalization of Carbon Nanotubes by Corona‐Discharge Induced Graft Polymerization for the Reinforcement of Epoxy Nanocomposites

Dispersion Stability of Functionalized MWCNT in the Epoxy–amine System and Its Effects on Mechanical and Interfacial Properties of Carbon Fiber Composites

Chemical modification of carbon fiber with diethylenetriaminepentaacetic acid/halloysite nanotube as a multifunctional interfacial reinforcement for silicone resin composites

The Role of Halloy Site on Crystallinity, Ion Conductivity, Thermal and Mechanical Properties of Poly(ethylene-Oxide)/halloysite Nanocomposites

Enhanced Interfacial, Mechanical, and Anti-Hygrothermal Properties of Carbon Fiber/cyanate Ester Composites with the Catalytic Sizing Agents of Titanium Epoxy

A Novel Method for Manufacturing High‐Performance Layered Silicate/Epoxy Nanocomposites Using an Epoxy–Diamine Adduct to Enhance Compatibility and Interfacial Reactivity

Thermo-Physical Properties of Epoxy Nanocomposites Reinforced with Amino-Functionalized Multi-Walled Carbon Nanotubes

The influence of functionalized MWCNT reinforcement on the thermomechanical properties and morphology of epoxy nanocomposites

Improvement Effect of Functionalized Cnts on Mechanical and Thermal Properties of Epoxy Matrix

Effect of surface functional modification of nano-alumina particles on thermal and mechanical properties of epoxy nanocomposites

Functionalized montmorillonite/epoxy resin nanocomposites with enhanced thermal and mechanical properties

Effects of Unfolded and Intercalated Halloysites on Mechanical Properties of Halloysite–epoxy Nanocomposites

Interfacial Improvement of Carbon Fiber/epoxy Composites Using a Simple Process for Depositing Commercially Functionalized Carbon Nanotubes on the Fibers

Recent advance in research on halloysite nanotubes-polymer nanocomposite

The Effect of Silanized Halloysite Nanotubes on the Structure of Polyethylene-Based Composite

Effects of functional modification on the thermal and mechanical properties of h-BN/epoxy nanocomposites

Functionalized halloysite nanotubes endowing epoxy resin with simultaneously enhanced flame retardancy and mechanical properties

In situ preparation of functionalized graphene oxide/epoxy nanocomposites with effective reinforcements

In‐situ preparation of modified‐halloysite/thermoset nanocomposites via thiol‐epoxy click chemistry

Atomistic simulations of functionalization of aramid fiber‐epoxy nanocomposite