Abstract:During the last decade, due to an increase in anthropogenic activities, a higher environmental accumulation of heavy metals has been found, which has resulted in disturbed biogeochemical balance. Many kinds of remediation techniques have been practiced to mitigate heavy metal toxicity in the aqueous phase; however, adsorption is the most commonly accepted technique for efficient heavy metal removal. In this study, conocarpus waste was pretreated with 0%, 10%, and 20% kaolinite and pyrolyzed at 600 °C for 1 h to synthesize biochars (BC, BCK10, and BCK20, respectively), while hydrothermalized at 200 °C for 6 h to synthesize hydrochars (HC, HCK10, and HCK20, respectively). After characterization, synthesized materials were employed for the removal of cadmium (Cd), copper (Cu), lead (Pb), and zinc (Zn) from contaminated water. Experimental data was further subjected to isotherm and kinetic models to estimate the adsorption mechanism. Among all the tested adsorbents, kaolinite-synthesized materials revealed comparatively higher adsorption compared to pristine materials. It was found that pH 7 was optimum for the maximum removal of tested heavy metals. Adsorption of tested heavy metals was well explained by Langmuir and Freundlich isotherms, while pseudo-second order and Elovich kinetics models fitted well for adsorption kinetics. The maximum adsorption capacity, as predicted by the Langmuir isotherm, was the highest for BCK20 (63.19 mg g−1 for Cd, 228.05 mg g−1 for Cu, 248.33 mg g−1 for Pb, and 45.79 mg g−1 for Zn) compared to the other tested materials, and for HCK20 (31.93 mg g−1 for Cd, 181.78 mg g−1 for Cu, 231.85 mg g−1 for Pb, and 45.72 mg g−1), it was higher than pristine HC. Isotherm and kinetics modeling data indicated that multiple mechanisms were involved in Cd, Cu, Pb, and Zn removal, such as chemisorption and electrostatic interactions. The amount of oxygen-containing surface functional groups and SiO2 particles could be responsible for the maximum adsorption of heavy metals by BCK20 and HCK20. Our findings suggest that biochar, hydrochar, and their kaolinite-modified composites possess the excellent potential to remove heavy metals from contaminated aqueous media, and could be further applied to treat wastewater to mitigate heavy metal toxicity for a sustainable environment.

Removal of Lead, Copper, Cadmium, Zinc, and Nickel from Aqueous Solutions by Alkali-Modified Biochar: Batch and Column Tests

Mechanisms for the Removal of Cd(II) and Cu(II) from Aqueous Solution and Mine Water by Biochars Derived from Agricultural Wastes.

Synthesis of Magnesium Modified Biochar for Removing Copper, Lead and Cadmium in Single and Binary Systems from Aqueous Solutions: Adsorption Mechanism

Kaolinite-Composited Biochar and Hydrochar as Low-Cost Adsorbents for the Removal of Cadmium, Copper, Lead, and Zinc from Aqueous Solutions

Potential of removing Pb, Cd, and Cu from aqueous solutions using a novel modified ginkgo leaves biochar by simply one-step pyrolysis

Adsorption of Cu2+, Cd2+, and Zn2+ by engineered biochar: Preparation, characterization, and adsorption properties

Removal of Pb(II) and Cd(II) from a Monometallic Contaminated Solution by Modified Biochar-Immobilized Bacterial Microspheres

Mn-embedded biochar for enhanced removal of Cd(II), Pb(II) and Ni(II): Physicochemical properties, high-efficiency adsorption capacities and quantitative mechanism analysis

Efficient removal of cadmium by salts modified-biochar: Performance assessment, theoretical calculation, and quantitative mechanism analysis

Simultaneous Removal of Cu2+, Cd2+ and Pb2+ by Modified Wheat Straw Biochar from Aqueous Solution: Preparation, Characterization and Adsorption Mechanism

Biochar with nanoparticle incorporation and pore engineering enables enhanced heavy metals removal

Adsorption of heavy metals by biochar derived from municipal sewage sludge

Single and Binary Adsorption Behaviour and Mechanisms of Cd2+, Cu2+ and Ni2+ onto Modified Biochar in Aqueous Solutions

Humulus scandens-Derived Biochars for the Effective Removal of Heavy Metal Ions: Isotherm/Kinetic Study, Column Adsorption and Mechanism Investigation

The removal of lead, copper, zinc and cadmium from aqueous solution by biochar and amended biochars

Mechanistic investigation of Pb2+ adsorption on biochar modified with sodium alginate composite zeolitic imidazolate framework-8

Biochar heavy metal removal in aqueous solution depends on feedstock type and pyrolysis purging gas

Comparison of biochars derived from different types of feedstock and their potential for heavy metal removal in multiple-metal solutions

Effect of inherent alkali and alkaline earth metals in biochar on adsorption of Pb 2+ in aqueous solution: Different roles of Na/Mg/K/Ca

Synthesis of biochar-ZnAl-layered double hydroxide composite for effective heavy metal adsorption: Exploring mechanisms and structural transformations

Superefficient Removal of Heavy Metals from Wastewater by Mg-Loaded Biochars: Adsorption Characteristics and Removal Mechanisms