Abstract:Among solid-state lighting technology, phosphor-converted white light-emitting diodes (pc-WLEDs) are excellent candidates to replace incandescent lamps for their merit of high energy conservation, long lifetime, high luminous efficiency as well as polarized emissions. Semiconductor quantum dots (QDs) are emerging color tunable emissive light converters. They have shown significant promise as light emitters, as solar cells, and in biological imaging. It has been demonstrated that the pc-WLED devices integrated with red emissive ZnCdSe QDs show improved color rendering index of device. However, cadmium-based QDs have limited future owing to the well-known toxicity. Recently, non-cadmium luminescence materials, i.e. CuInS2-based QDs, are investigated as desirable low toxic alternatives. Particularly, CuInS2-based QDs exhibit very broad emissions spectra with full width at half maximum (FWHM) of 100-120 nm, large Stokes shifts of 200~300 meV and finely-tunable emissions. In order to adjust emission wavelengths and improved quantum yield (QY), CuInS2/ZnS (CIS/ZnS) core/shell structure was introduced. Therefore, CIS/ZnS QDs have been extensively investigated and be used as color converter in solid-state lighting. Synthesis and application of CuInS2/ZnS core/shell QDs are conducted using a hot injection route. CIS/ZnS core/shell QDs with molar ratio of Cu:In equal to 1:4 are prepared. For WLED fabrication, the CIS/ZnS QD is dispersed in toluene first, and then it is blended with transparent acrylic-based UV resin. Subsequently, the commercial green-emitting Lu3Al5O12: Ce3+ (LuAG) phosphors are mixed with QDs-resin mixture. After that, the QDs-phosphors-resin mixtures are put in the oven at 140 °C for 1 h to evaporate the toluene. Subsequently, the homogeneous QDs-phosphors-resin mixture is dropped on the top of a blue LED chip (InGaN). Then, the device is cured by 400 W UV light to form WLED. The emission wavelength of CIS/ZnS QD exhibits yellow region of 552 nm with QY of 76 %, and with relatively broad bandwidth of 86 nm. The structure of CIS/ZnS belongs to chalcopyrite phase and its average particle size is 3.2 nm. The luminous efficacy, color rendering index (CRI), correlated color temperature (CCT), and CIE chromaticity coordinate of WLED is 47 lm/W, 89, 5661 K, and (0.33, 0.29), respectively.

High Color Rendering Index White Light Emitting Diodes Fabricated from a Combination of Carbon Dots and Zinc Copper Indium Sulfide Quantum Dots

White LED Based on YAG : Ce,Gd Phosphor and CdSe–ZnS Core/Shell Quantum Dots

White Light Emitting Diodes Based on Green Graphene Quantum Dots and Red Graphene Quantum Dots

An Efficient Green-Emitting Quantum Dot with Near-Unity Quantum Yield and Suppressed Auger Recombination for High-Performance Light-Emitting Diodes

High Color Rendering Index and Tunable Color Temperature of White Light Emitting Diodes with Yellow Emitting Graphene Quantum Dots Coated

Fabrication of CuInS2/ZnS quantum dots-based white light-emitting diodes with high color rendering index

High-Color-Rendition White QLEDs by Balancing Red, Green and Blue Centres in Eco-Friendly ZnCuGaS:In@ZnS Quantum Dots

Binary Host‐induced Exciplex Enabled High Color‐Rendering Index of 94 for Carbon Quantum Dot‐Based White Light‐Emitting Diodes

Cesium lead halide perovskite quantum dot-based warm white light-emitting diodes with high color rendering index

High Stability Carbon Dots Phosphor and Ultra-High Color Rendering Index White Light-Emitting Diodes

53% Efficient Red Emissive Carbon Quantum Dots for High Color Rendering and Stable Warm White‐Light‐Emitting Diodes

High quantum-yield CdSexS1-x/ZnS core/shell quantum dots for warm white light-emitting diodes with good color rendering.

Super-high Color Rendering Properties of Color Temperature Tunable White LEDs Based on High Quality InP/ZnS Quantum Dots Via Myristic Acid Passivation and Ag Doping

White light emitting diodes with a high colour rendering index of 98.3 using blue emissive carbon dots

Ultrabroad-band, Red Sufficient, Solid White Emission from Carbon Quantum Dot Aggregation for Single Component Warm White Light Emitting Diodes with a 91 High Color Rendering Index.

One‐Step Synthesis of White‐Light‐Emitting Carbon Dots for White LEDs with a High Color Rendering Index of 97

Multicolor Carbon Dots for Warm White Light-Emitting Diodes with a High Color Rendering Index of 93.2

Self‐Quenching‐Resistant Red Emissive Carbon Dots with High Stability for Warm White Light‐Emitting Diodes with a High Color Rendering Index

A Simple Device‐To‐Device Transform for White Light‐Emitting Diode with Monochromatic Carbon Dots

Highly Efficient and Stable CdZnSeS/ZnSeS Quantum Dots for Application in White Light-Emitting Diode

High Color‐Rendering Index and Stable White Light‐Emitting Diodes by Assembling Two Broadband Emissive Self‐Trapped Excitons