Abstract:Textured piezoelectric ceramics, such as textured Pb(Mg1/3Nb2/3)O-3-PbTiO3 (PMN-PT) ceramics, have attracted considerable attention from both academia and industry, as they possess crystal-like piezoelectric properties, high composition homogeneity, and low manufacturing cost. However, the main difficulty with the textured piezoelectric ceramics is the presence of BaTiO3 (BT) templates, which greatly reduces their piezoelectricity and phase transition temperature. Thus, it is highly recommended to fabricate textured piezoelectric ceramics using as few templates as possible. Here, we successfully fabricated high-quality -textured PMN-28PT ceramics (texturing degree of 99%) by using an extremely small amount of BT templates (1 vol.%) with the help of CuO/B2O3 sintering aids. The textured PMN-28PT ceramic exhibits 80% piezoelectric coefficient (d(33) similar to 1200 pC/N), 96% electromechanical coefficient (k(33) similar to 88%) and the same temperature stability (T-rt similar to 100, T-c similar to 150 degrees C) when compared to its single crystal counterpart. In addition, by using an alternating current electric field poling (AC-poling), the piezoelectric coefficient d(33) and dielectric permittivity epsilon(33) of the textured PMN-28PT ceramics were further enhanced around 5-8%. It is believed that the advantages of high electromechanical properties, low cost, and easy mass production of textured PMN-28PT ceramic will make it a promising candidate for advanced electromechanical devices.

Enhanced Electromechanical Properties and Phase Transition Temperatures in [001] Textured Pb(In1/2nb1/2)O-3-Pb(Mg1/3nb2/3)O-3-Pbtio3 Ternary Ceramics

Phase diagram and properties of high TC/TR-T Pb (In 1/2 Nb1/2) O3- Pb(Zn1/3 Nb 2/3) O3-PbTiO3 ferroelectric ceramics

Formation Mechanism of Highly [001](C) Textured Pb(In1/2nb1/2)O-3-Pb(Mg1/3nb2/3)O-3-Pbtio3 Relaxor Ferroelectric Ceramics with Giant Piezoelectricity

Design Morphotropic Phase Boundary Composition in the Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTio3 System and Its Performance

Templated Grain Growth and Piezoelectric Properties of 〈001〉-Textured PIN–PMN–PT Ceramics

Phase Transitional Behavior and Electrical Properties of Pb(In1/2Nb1/2)O3–Pb(Mg1/3Nb2/3)O3–PbTiO3 Ternary Ceramics

Effects of Nano-Sized In2O3on Sintering Behavior and Electrical Properties of 0.28Pb(in1/2nb1/2)o3-0.40Pb(mg1/3< /Sub>nb2/3)o3-0.32Pbtio3ceramics

Characterization Of Pb(In1/2nb1/2)O-3-Pb(Mg1/3nb2/3)O-3-Pbtio3 Ferroelectric Crystal With Enhanced Phase Transition Temperatures

Achieving Both High Electromechanical Properties and Temperature Stability in Textured PMN‐PT Ceramics

Electromechanical Properties of Pb(In1/2Nb1/2)O3–Pb(Mg1/3Nb2/3)O3–PbTiO3 Single Crystals

Full Matrix Electromechanical Properties of Textured Pb(In1/2Nb1/2)O3-Pb(Sc1/2Nb1/2)O3-PbTiO3 Ceramic

Electromechanical properties of Pb(In(1∕2)Nb(1∕2))O(3)-Pb(Mg(1∕3)Nb(2∕3))O(3)-PbTiO(3) single crystals.

Characterization of Pb(In1/2Nb1/2)O3–Pb(Mg1/3Nb2/3)O3–PbTiO3 ferroelectric crystal with enhanced phase transition temperatures

Preparation, Structure, and Electric Properties of the Pb(Zn1/3Nb2/3)O3–Pb(Yb1/2Nb1/2)O3–PbTiO3 Ternary Ferroelectric System Ceramics Near the Morphotropic Phase Boundary

Achieving Ultrahigh Electromechanical Properties with High TC in PNN-PZT Textured Ceramics

Phase diagram and properties of Pb(In 1/2Nb 1/2)O 3-Pb(Mg 1/3Nb 2/3)O 3-PbTiO 3 polycrystalline ceramics

High piezoelectric response in [001] textured Sm3+ doped Pb(Mg1/3Nb2/3)O3–PbTiO3 ceramics

Synergetic Enhancement in the Piezoelectric Coefficient and Electromechanical Factor in PYN-PMN-PT Ceramics Via Texture Engineering

High piezoelectric response in [001] textured Sm<SUP>3+</SUP> doped Pb(Mg<sub>1/3</sub>Nb<sub>2/3</sub>)O<sub>3</sub>-PbTiO<sub>3</sub> ceramics

Electromechanical properties of tetragonal Pb(In(12)Nb(12))O(3)-Pb(Mg(13)Nb(23))O(3)-PbTiO(3) ferroelectric crystals.