Abstract:Polymer-based dielectrics with high energy density and low dielectric loss are urgently needed in microelectronic equipment and high-power density electric energy storage devices. In an effort to overcome the disadvantage of the high energy loss of poly(vinylidene fluoride) (PVDF)-based ferroelectric fluoropolymers, herein, a series of poly(vinylidene fluoride-co-trifluoroethylene-co-chlorotrifluoroethylene)-g-poly(vinyl alcohol) [P(VTrCT)-g-PVA] were fabricated using the reversible addition–fragmentation chain transfer polymerization procedure. The PVA side chain shows great compatibility with the PVDF main chain and the hydrogen bond could be constructed among the hydroxyl and ester groups, which is responsible for the suppressed ferroelectric loss and enhanced breakdown strength and thus improved energy density and charge–discharge efficiency observed in the P(VTrCT)-g-PVAs. The graft copolymer containing 23 mol % PVA shows the maximum discharge energy density of 13.6 J/cm3 at 500 MV/m. The work demonstrates that the hydrogen bond constructed based on the hydroxyl group may offer a strategy to tune the ferroelectric and energy storage performance of PVDF-based fluoropolymers.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c01658.Synthesis routes of P(VTrCT)–N3 and P(VTrCT)–CTA; 1H NMR and 19F NMR spectra of P(VTrCT)–N3 and 1H NMR of P(VTrCT)–CTA; temperature-dependent FT-IR spectra of P(VTrCT)-g-PVA7; real and imaginary part of the dielectric constant as a function of temperature at different frequencies for P(VTrCT) and P(VTrCT)-g-PVAc; D–E loops, discharge energy density and discharge efficiency of P(VTrCT) and P(VTrCT)-g-PVAc; tensile stress–strain curves of P(VTrCT) and graft copolymers; and composition and crystallinity of P(VTrCT), P(VTrCT)-g-PVAc, and P(VTrCT)-g-PVA (PDF)This article has not yet been cited by other publications.

Linear-like Dielectric Behavior and Low Energy Loss Achieved in Poly(ethyl Methacrylate) Modified Poly(vinylidene-Co-trifluoroethylene)

High-Field Antiferroelectric Behavior And Minimized Energy Loss In Poly(Vinylidene-Co-Trifluoroethylene)-Graft-Poly(Ethyl Methacrylate) For Energy Storage Application

Tuning Phase Transition and Ferroelectric Properties of Poly(Vinylidene Fluoride-Co-Trifluoroethylene) Via Grafting with Desired Poly(Methacrylic Ester)S As Side Chains

Electrical Energy Discharging Performance Of Poly(Vinylidene Fluoride-Co-Trifluoroethylene) By Tuning Its Ferroelectric Relaxation With Polymethyl Methacrylate

Enhanced Quasilinear Dielectric Behavior of Polyvinylidene Fluoride via Confined Crystallization and Aligned Dipole Polarization

Ferroelectric relaxation dependence of poly(vinylidene fluoride-co-trifluoroethylene) on frequency and temperature after grafting with poly(methyl methacrylate)

Enhancing Discharged Energy Density and Suppressing Dielectric Loss of Poly(vinylidene Fluoride‐ter‐trifluoroethylene‐ter‐chlorofluoroethylene) by a Sandwiched Structure

High-field antiferroelectric-like behavior in uniaxially stretched poly(vinylidene fluoride-trifluoroethylene-chlorotrifluoroethylene)-grafted-poly(methyl methacrylate) films with high energy density

The effects of chlorotrifluoroethylene (CTFE) units on the dielectric and energy storage properties of P(VDF-CTFE)

Regulating Dielectric And Ferroelectric Properties Of Poly(Vinylidene Fluoride-Trifluoroethylene) With Inner Ch=Ch Bonds

Significantly Improved Dielectric Breakdown Strength and Energy Density in P(VDF-TrFE-CTFE) Polymer Via a Facile Uniaxial Drawing Process

Energy storage study of ferroelectric poly(vinylidene fluoride-trifluoroethylene-chlorotrifluoroethylene) terpolymers

Enhanced Dielectric/ferroelectric Properties of P(VDF-TrFE) Composite Films with Organic Perovskite Ferroelectrics

Tailoring Dielectric and Energy Storage Performance of PVDF-Based Relaxor Ferroelectrics with Hydrogen Bonds

High Field Antiferroelectric-like Dielectric of Ploy(vinylidene fluoride-co-trifluoroethylene-co-chlorotrifluoroethylene)-graft-Poly(styrene-methyl methacrylate) for High Pulse Capacitors with High Energy Density and Low Loss

Comparisons of Ferroelectric and Dielectric Behavior of Polyvinylidene Fluoride and Polyvinylidene Fluoride Trifluoroethylene

Dielectric Phenomena and Electrical Energy Storage of Poly(vinylidene Fluoride) Based High-K Polymers

Dependence of dielectric, ferroelectric, and piezoelectric properties on crystalline properties of p(VDF-co-TrFE) copolymers

Achieving high energy density in PVDF-based polymer blends: suppression of early polarization saturation and enhancement of breakdown strength.

Towards high efficient nanodielectrics from linear ferroelectric P(VDF-TrFE-CTFE)-g-PMMA matrix and exfoliated mica nanosheets

Tailoring Dielectric Performance of P(VDF-CTFE) Via Incorporating Thiophenol As a Side Chain