Abstract:The effect of cooling on the brittleness of glasses in general, and bulk metallic glasses (BMGs) in particular, is usually studied with continuously varying cooling rates; slower cooling rates lead to stiffer, harder, and more brittle glasses than higher cooling rates. These protocols obscure any potential discontinuity that a glass might experience depending on whether its microstructure resembles that of a fragile or a strong glass-forming liquid. Here, we use large-scale molecular dynamics to simulate the nanoindentation behavior of model BMGs (Zr$_{0.6}$Cu$_{0.3}$Al$_{0.1}$) obtained by rapidly quenching equilibrium melts from temperatures above and below the fragile-to-strong transition temperature $T_\textrm{fst}$, leading to fragile and strong glasses, respectively. While the contact modulus deduced from the indentation simulation evolves smoothly with the temperature $T_\text{q}$ from which the melt is quenched, the plastic response changes quasi-discontinuously as $T_\text{q}$ passes through $T_\textrm{fst}$. In particular, strong glasses develop highly asymmetric flow profiles with mature shear bands, in contrast to fragile glasses. Quantitative differences reveal themselves not only through a formal von Mises localization parameter analysis but also through image analysis of flow patterns using pre-trained artificial intelligence models. Moreover, seemingly erratic flow profiles for our indentation geometry produced surprisingly reproducible and, thus, deterministic features. It remains to be determined to what extent other classes of glass formers follow our observation that the degree of brittleness is significantly influenced by whether the melt is fragile or strong when it falls out of equilibrium at the glass transition temperature.

Temperature-Induced Ductile-To-Brittle Transition of Bulk Metallic Glasses

The Ductile to Brittle Transition Behavior in a Zr-based Bulk Metallic Glass

Structural transformation and rheological processes in bulk metallic glass Zr41Ti14Cu12.5Ni10Be22.5

Shear Transformation Zone Volume Determining Ductile–brittle Transition of Bulk Metallic Glasses

Ductile to brittle transition of fracture of a Zr-based bulk metallic glass: Strain rate effect

High temperature deformation behaviors of the Zr 63.36 Cu 14.52 Ni 10.12 Al 12 bulk metallic glass

Temperature Effect on Fracture of a Zr-Based Bulk Metallic Glass

Static and cyclic mechanical behaviours and fracture mechanisms of Zr-based metallic glass at elevated temperatures

The temperature dependent dynamic mechanical response of a ZrCuNiAl bulk metallic glass

Shear Band Features of Bulk Metallic Glasses During Indentation at Cryogenic Temperature

Compressive Fracture Characteristics of A Zr-Based Bulk Metallic Glass at High Test Temperatures

Effects of cryogenic temperatures on mechanical behavior of a Zr60Ni25Al15 bulk metallic glass

Bending Behavior of TiZrNiCuBe Bulk Metallic Glass

Temperature Dependent Dynamic Flow Behavior of an In-Situ Ti-based Bulk Metallic Glass Composite

Fracture and Strength of a TiZr-based Metallic Glass at Low Temperatures

Mechanical Behavior of Zr65Al10Ni10Cu15 and Zr52.5Al10Ni10Cu15Be12.5 Bulk Metallic Glasses

Brittleness of metallic glasses dictated by their state at the fragile-to-strong transition temperature

Cryogenic-temperature-induced transition from shear to dilatational failure in metallic glasses

Tension Fracture Behavior of Zr41.25ti13.75ni10cu12.5be22.5 Bulk Metallic Glass

Ambient Temperature Embrittlement of a Zr-based Bulk Metallic Glass

Cryogenic-temperature-induced Phase Transformation in a CuZr-based Bulk Metallic Glass Composite under Tensile Stress