Abstract:Nominally identical permalloy nanowires, with widths down to 150 nm, were fabricated onto a single electron transparent Si$_{3}$N$_{4}$ membrane using electron beam lithography (EBL) and focused ion beam (FIB) milling. Transmission electron microscopy (TEM) experiments were performed to compare the nanostructures produced by these two techniques in what we believe is the first direct comparison of fabrication techniques for nominally identical nanowires. Both EBL and FIB methods produced high quality structures with edge roughness being of the order of the mean grain size 5 -10 nm observed in the continuous films. However, significant grain growth was observed along the edges of the FIB patterned nanowires. Lorentz TEM \emph{in situ} imaging was carried out to compare the magnetic behavior of the domain walls in the patterned nanowires with anti-notches present to pin domain walls. The overall process of domain wall pinning and depinning at the anti-notches showed consistent behaviour between nanowires fabricated by the two methods with the FIB structures having slightly lower characteristic fields compared to the EBL wires. However, a significant difference was observed in the formation of a vortex structure inside the anti-notches of the EBL nanowires after depinning of the domain walls. No vortex structure was seen inside the anti-notches of the FIB patterned nanowires. Results from micromagnetic simulations suggest that the vortex structure inside the anti-notch can be suppressed if the saturation magnetization (M$_{s}$) is reduced along the nanowires edges. Whilst the two fabrication methods show that well defined structures can be produced for the dimensions considered here, the differences in the magnetic behavior for nominally identical structures may be an issue if such structures are to be used as conduits for domain walls in potential memory and logic applications.

Direct-Current Effects on Magnetization Reversal Properties of Submicron-Size Permalloy Patterns for Radio-Frequency Devices

Organic Magnetic-Field Effect Examined in Frequency Domain and Time Domain

Current-driven Domain Wall Dynamics And Its Electric Signature In Ferromagnetic Nanowires

Effect of Applied Dc Fields on the Domain Wall Magnetization Processes of Fenbbcu Soft Magnetic Nanocrystalline Ribbons at Low Frequencies

Magnetization Reversal and Configurational Anisotropy of Dense Permalloy Dot Arrays

Magnetic Force Microscopy Study of Electron-Beam-patterned Soft Permalloy Particles: Technique and Magnetization Behavior

Characterization of spin pumping effect in Permalloy/Cu/Pt microfabricated lateral devices

Emergent magneto-inductance effect in permalloy thin films on flexible polycarbonate substrates at room temperature

Enhancement of Magnetization Damping Coefficient of Permalloy Thin Films with Dilute Nd Dopants

Magnetic Domain Wall Engineering in a Nanoscale Permalloy Junction

Modulation of Magnetic Anisotropy and Spin-Orbit Interaction by Electrical Current in FeCoB Nanomagnets

Dependence of the Permeability-Frequency Spectra of Fe88Zr7B4Cu Alloys on Dc Magnetic Fields

Understanding curvature effects on the magnetization reversal of patterned permalloy Archimedean spirals

Direct comparison of domain wall behavior in Permalloy nanowires patterned by electron beam lithography and focused ion beam milling

Role of intersublattice exchange interaction on ultrafast longitudinal and transverse magnetization dynamics in Permalloy

Investigation of magnetization dynamics in trilayer width-modulated nanowires

Micromagnetic Studies of Antiferromagnetism and Resistance-Field Curves in Giant Magnetoresistive Co/Al/Nife

Perpendicular magnetic anisotropy in permalloy ultrathin film grown on RuO2(101) surface

Geometry-induced Bloch point domain wall in Permalloy conical frustum nanowires for advanced spintronics applications

Effect of disorder studied with ferromagnetic resonance for arrays of tangentially magnetized sub-micron Permalloy discs fabricated by nanosphere lithography

Magnetic fingerprint in a ferromagnetic wire: Spin torque diode effect and induction of the DC voltage spectrum inherent in the wire under application for RF current