Enhancement of Photocatalytic Activity for BiPO4via Phase Junction

Yanyan Zhu,Yanfang Liu,Yanhui Lv,Qiang Ling,Di Liu,Yongfa Zhu

DOI: https://doi.org/10.1039/c4ta01807a

IF: 11.9

2014-01-01

Journal of Materials Chemistry A

Abstract:Photo-generated charges of BiPO4with a phase junction could be separated and transferred quickly, which enhanced the photocatalytic performance.

What problem does this paper attempt to address?

Enhanced Photocatalytic Activity of Z-Scheme BiVO4 Heterophase Junction Via Giant Built-in Electric Field

Jianqun Bao,Suisui Wang,Jiaxing Wu,Fan,Yajun Wang,Dan Luo,Guiyuan Jiang,Wenqing Yao

DOI: https://doi.org/10.1016/j.surfin.2024.105116

IF: 6.2

2024-01-01

Surfaces and Interfaces

Abstract:Built-in electric field (IEF) can improve photocatalytic efficiency by promoting charge separation and transfer. Herein, a Z-scheme BiVO4 heterophase junction with giant IEF was successfully constructed. By changing the pH value of the precursor solution, the ratio of monoclinic octahedral BiVO4 (m-BVO) to tetragonal microsphere BiVO4 (t-BVO) is regulated to form a heterophase junction (mt-BVO), so as to regulate the IEF intensity. When pH = 0.5, a large number of pores were formed at the interface of the two forms in mt-BVO-35%m, so it has a larger specific surface area. mt-BVO-35%m has optimal photocatalytic tetracycline degradation activity. Under visible light irradiation, its reaction rate constant k is shown to be 3 times higher than that of pure m-BVO, and the TOC removal rate has increased from 12 % to 36 %. Through characterization, it can be proved that the IEF strength of mt-BVO-35%m is 11.86 times that of m-BVO. The significantly improved activity is mainly attributed to the presence of a giant IEF between m-BVO and t-BVO. The IEF drives the photogenerated electrons to transfer from the CB of t-BiVO4 to the VB of m-BiVO4, which greatly enhances the separation and transfer of photogenerated charge carriers. Moreover, a mechanism of Z-scheme charges transfer pathway in the mt-BVO-35%m heterophase junction was also revealed.
Enhancement of Photoelectrochemical Performance of Bismuth Vanadate (Bivo4)-Based Photoanode by Building Phase-Junction Configurations

Asuka Minato,Zhenhua Pan,Kenji Katayama,Woon Yong Sohn

DOI: https://doi.org/10.2139/ssrn.4142068

2022-01-01

SSRN Electronic Journal

Abstract:To enhance the photo-electrochemical (PEC) water splitting efficiency of BiVO4-based photoanode, we designed phase-junction configurations of monoclinic scheelite (MS), tetragonal scheelite (TS) and tetragonal zircon (TZ) phases of BiVO4. With aid of the phase-junctions, we were able to achieve drastic improvements of the PEC performance. We successfully confirmed using observed X-ray diffraction (XRD) and Raman spectra that the target films were well fabricated. In addition, we could demonstrate using a time-resolved spectroscopic technique and a photo-electrochemical impedance spectroscopy (PEIS) that the enhanced water splitting efficiency could be attributed to the improvement of the charge separation efficiency.
Enhancement of full-spectrum photocatalytic activity over BiPO4/Bi2WO6 composites

Yanyan Zhu,Yajun Wang,Qiang Ling,Yongfa Zhu

DOI: https://doi.org/10.1016/j.apcatb.2016.07.002

2017-01-01

Abstract:•BiPO4/Bi2WO6 composite photocatalysts were prepared via ultrasonic-calcination method.•BiPO4/Bi2WO6 composites had superior photocatalytic performance under full-spectrum condition.•The enhancement mechanism of photocatalytic activity over BiPO4/Bi2WO6 was systematically investigated.
Construction of Α–β Phase Junction on Bi4V2O11 Via Electrospinning Retardation Effect and Its Promoted Photocatalytic Performance

Chade Lv,Gang Chen,Jingxue Sun,Yansong Zhou

DOI: https://doi.org/10.1021/acs.inorgchem.6b00130

IF: 4.6

2016-01-01

Inorganic Chemistry

Abstract:The creation of a phase junction structure in photocatalysts is a wise approach to promote photocatalytic performance, as phase junctions possess the potential to inhibit the recombination of photoinduced charge carriers. Here, Bi4V2O11 nanofibers with an alpha-beta phase junction are fabricated via electrospinning with subsequent calcination. Electrospinning offers the opportunity to keep alpha-Bi4V2O11 from transforming into beta-Bi4V2O11 completely due to an electrospinning retardation effect, leading to the formation of an alpha-beta Bi4V2O11 phase junction. Furthermore, the alpha-beta Bi4V2O11 phase junction realizes a well-established type-II band alignment. Photoelectrochemical measurements and photoluminescence spectroscopic investigations demonstrate that the phase junction structure has a significant impact on the separation and transfer of photogenerated electrons and holes. Thus, the alpha-beta phase junction on Bi4V2O11 holds the key to achieving promoted efficiency in the photocatalysis process.
A superior photocatalytic performance of a novel Bi2SiO5 flower-like microsphere via a phase junction.

Di Liu,Jun Wang,Mo Zhang,Yanfang Liu,Yongfa Zhu

DOI: https://doi.org/10.1039/c4nr05058d

IF: 6.7

2014-01-01

Nanoscale

Abstract:A phase junction over a Bi2SiO5 photocatalyst with the orthorhombic Bi2SiO5 and the tetragonal Bi2SiO5 structure was successfully synthesized via an ion exchange method using BiOBr solid microspheres as the sacrificial template. In the meantime, the as-prepared Bi2SiO5 phase junction possesses a novel morphology of a flower-like microsphere with nanoparticles evenly embedded in its nano-petals. It was found that the Bi2SiO5 phase junction not only showed a highly enhanced photocatalytic activity and excellent durability under UV or simulated solar irradiation, but also showed a remarkable visible-light activity for photo-degradation of phenol. Experimental results reveal that the tetragonal Bi2SiO5 phase in this phase junction possesses a narrower band gap, thus leading to its extended light absorption. The efficient charge separation via a phase junction would make a great contribution to its highly enhanced photocatalytic activity under UV or simulated solar irradiation. The high efficiency in the degradation of organic pollutants makes the as-prepared photocatalyst a promising candidate for photocatalytic environmental purification.
Improved photo-redox activity of 2D Bi4Ti3O12−BiVO4−Bi4V2O10 heterostructure via piezoelectric-enhanced charge transfer effect

Wuyou Wang,Kai Zhu,Beibei Zhang,Xiaowei Chen,Dongqi Ma,Xuewen Wang,Rongbin Zhang,Yin Liu,Jinxin Shen,Pengyu Dong,Xinguo Xi

DOI: https://doi.org/10.1039/d2dt02346f

IF: 4

2022-10-12

Dalton Transactions

Abstract:The effective separation of photoexcited charge carriers is a significant requirement that determines the photocatalytic performance of Coupling piezoelectric field caused by mechanical force has been confirmed as an effective strategy to boost the separation efficiency of photoexcited charge carriers that determines the photocatalytic performance. In this study, we introduced Bi4Ti3O12 with superior piezoelectric properties in BiVO4−Bi4V2O10 materials to synthesize a 2D Bi4Ti3O12−BiVO4−Bi4V2O10 photocatalyst via a facile hydrothermal method. Compared with bare BiVO4, the Bi4Ti3O12−BiVO4−Bi4V2O10 piezo-photocatalytic activity of Cr(VI) removal and oxygen evolution are boosted remarkably under both illumination and ultrasound treatment. The promoted photocatalytic activity can be ascribed to the accelerated photoexcited carriers separation efficiency driven by the polarization electric field and synergy effect in the heterostructure. This work provides a simple and sustainable strategy for the design and development of piezo-photocatalysts with high photo-redox activity capacity.

chemistry, inorganic & nuclear
A superior photocatalytic performance of a novel Bi2SiO5flower-like microsphere via a phase junction

Di Liu,Jun Wang,Mo Zhang,Yanfang Liu,Yongfa Zhu

DOI: https://doi.org/10.1039/c4nr05058d

IF: 6.7

2014-01-01

Nanoscale

Abstract:A phase junction over a Bi2SiO5 photocatalyst with the orthorhombic Bi2SiO5 and the tetragonal Bi2SiO5 structure was successfully synthesized via an ion exchange method using BiOBr solid microspheres as the sacrificial template. In the meantime, the as-prepared Bi2SiO5 phase junction possesses a novel morphology of a flower-like microsphere with nanoparticles evenly embedded in its nano-petals. It was found that the Bi2SiO5 phase junction not only showed a highly enhanced photocatalytic activity and excellent durability under UV or simulated solar irradiation, but also showed a remarkable visible-light activity for photo-degradation of phenol. Experimental results reveal that the tetragonal Bi2SiO5 phase in this phase junction possesses a narrower band gap, thus leading to its extended light absorption. The efficient charge separation via a phase junction would make a great contribution to its highly enhanced photocatalytic activity under UV or simulated solar irradiation. The high efficiency in the degradation of organic pollutants makes the as-prepared photocatalyst a promising candidate for photocatalytic environmental purification.
High-performance visible-light responsive BiPO4@ZnWO4 photocatalyst for enhancing photodegradation characteristics

Jingru Wang,Haiyan Wang,Chenglun Liu,Zao Jiang,Xueyan Liu,Ziyi Kang,Ziman Hao,Qi Feng,Longjun Xu

DOI: https://doi.org/10.1007/s10971-024-06436-3

2024-06-21

Journal of Sol-Gel Science and Technology

Abstract:The rational construction of heterostructures plays a pivotal role in enhancing both the separation of photogenerated carriers in semiconductors and the photocatalytic activity. This paper successfully constructs a novel BiPO 4 @ZnWO 4 p-n type heterojunction photocatalyst by hydrothermal and ultrasonic stirring methods. The BiPO 4 @ZnWO 4 heterojunction exhibits outstanding photocatalytic performance, achieving a degradation efficiency of 99% for rhodamine B (RhB) under visible light illumination in just 40 min. Furthermore, its photocatalytic reaction rate constant is 3.9 and 96.51 times higher than that of pure ZnWO 4 and BiPO 4 , respectively. Electrochemical characterization demonstrates a more robust photocurrent response and lower resistance in the composite sample, facilitating efficient transport of photogenerated carriers. In addition, the 20% BiPO 4 @ZnWO 4 heterojunction also exhibits desirable photodegradation stability, maintaining a RhB removal rate above 80% even after 5 cycles. Within the context of the photocatalytic reaction system, the superoxide radical (·O 2 − ) plays a key role, succeeded by the hydroxyl radical (·OH) and the photoinduced hole (h + ). This paper provides a feasible p-n type heterojunction photocatalyst for the treatment of dyeing wastewater.

materials science, ceramics
Photocatalytic properties of Bi2WO6/BiPO4 Z-scheme photocatalysts induced by double internal electric fields

Yuning Su,Guoqiang Tan,Ting Liu,Long Lv,Ying Wang,Xinglei Zhang,Zhongwei Yue,Huijun Ren,Ao Xia

DOI: https://doi.org/10.1016/j.apsusc.2018.06.153

IF: 6.7

2018-01-01

Applied Surface Science

Abstract:•Bi2WO6/BiPO4 Z-scheme photocatalysts exhibited enhanced photocatalysis activity.•The internal electric fields greatly helped with the formation of Z-scheme mechanism.•Combining two einternal electric fields is also applicable to other modification.
Enhancement of visible light mineralization ability and photocatalytic activity of BiPO 4 /BiOI

yanfang liu,wenqing yao,di liu,ruilong zong,mo zhang,xinguo ma,yongfa zhu

DOI: https://doi.org/10.1016/j.apcatb.2014.08.039

2015-01-01

Abstract:•BiPO4/BiOI composite photocatalyst was synthesized via anion exchange method.•The photocatalytic activity of BiPO4/BiOI was increased by BiPO4.•The mineralization ability of BiPO4/BiOI was improved via charge transfer.•The mechanism for the enhanced photocatalytic performance was illustrated.
Synthesis and photocatalytic performance of Bi4Ti3O12/TiO2 heterojunction

Yan LI,Fang-fang WANG,Zheng-ping FU,Ya-lin LU

DOI: https://doi.org/10.16606/j.cnki.issn 0253-4320.2017.10.024

2017-01-01

Abstract:By means of the similar structures between Bi4Ti3O12 and TiO2,the Bi4Ti3O12/TiO2 heterojunction is made by the hydrothermal method using TiO2 nano sheets as raw materials.The formation of heterojunction structure is confirmed by X ray diffraction,scanning electron microscopy and high-resolution transmission electron microscopy.The characterization of visible light catalytic activity shows that the performances of the Bi4Ti3O12/TiO2 heterojunction structure are significantly improved compared to TiO2 or Bi4Ti3O12.The photoelectrochemical characterization further confirms the Bi4Ti3O12/TiO2 heterojunction structure can effectively promote the separation of photogenerated electron and hole pairs.The experimental results also show that the enhancement is closely related to the ratio between two phases,so that the performance is optimized by controlling the phase ratio.
Interfacial chemical bond modulated ultrathin PbBiO2Cl/Bi2O3 Z-scheme heterojunction for promoting charge separation and enhancing photocatalytic activity

Jincai Peng,Yuehong Peng,Liang Xu,Qi Wang,Yongjin Li,Zhaoyi Yin,Jin Han,Jianbei Qiu,Zhengwen Yang,Zhiguo Song

DOI: https://doi.org/10.1016/j.jallcom.2023.169862

IF: 6.2

2023-07-01

Journal of Alloys and Compounds

Abstract:Rational design of heterojunction can effectively promote photogenerated charge separation, which is considered to be an effective strategy to enhance the photocatalytic activity. Here, 2D ultrathin PbBiO2Cl/Bi2O3 heterojunction was synthesized in situ by glucose assisted one-step hydrothermal reaction followed by calcination. The theoretical calculations and experimental results indicate that the ultrathin PbBiO2Cl/Bi2O3 heterojunction has a direct Z-scheme band structure modulated by the interfacial chemical bonds of Pb-O and Bi-O, which can significantly improve the charge separation efficiency, thereby enhancing the photocatalytic activity. The full spectrum photocatalytic activity of the ultrathin PbBiO2Cl/Bi2O3 heterojunction is 10 and 30 times higher than that of pristine PbBiO2Cl and Bi2O3, and the visible light photocatalytic activity is 13.5 and 112.3 times higher than that of pristine PbBiO2Cl and Bi2O3, respectively. This work provides a new strategy for in situ construction of ultrathin Z-scheme heterojunction with efficient charge separation modulated by interfacial chemical bonds.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Monoclinic BiPO4: Preparation, photocatalytic properties in experiment and theoretical calculation

Xiaoqing Li,Donghai Wu,Jun Yang,Quanxi Zhu,Jiankang Wang,Yuan Peng,Taiping Xie,Houyang Chen

DOI: https://doi.org/10.1016/j.solener.2021.03.043

IF: 7.188

2021-05-01

Solar Energy

Abstract:It is of great significance to improve the photocatalytic activity of the existing available materials. The meaningful efforts always make them most close to industrial application. In this work, we modified the morphology and properties of BiPO4 through adding structure-directing agent, polyvinylpyrrolidone. Interestingly, the results of experiment and first principle calculation showed that the carbon was introduced into BiPO4 crystal lattice of BiPO4 due to carbonization of polyvinylpyrrolidone, which modulated the band structure of BiPO4 and formed sub-band between valence band and conduction band. The modified BiPO4 could totally degrade MB dyes under visible light for 30 min. More interestingly, the sub-band triggered non-radiative transition of photoinduced electrons, which further inhibited the recombination of photoinduced carriers, prolonged their lifetime and ultimately boosted the photocatalytic activity. In the process of photocatalytic degradation RhB, reaction rate constant of the modified BiPO4 was more 3 times than that of pure BiPO4.

energy & fuels
In Situ Assembly of BiOI@Bi12O17Cl2 P-N Junction: Charge Induced Unique Front-Lateral Surfaces Coupling Heterostructure with High Exposure of BiOI {001} Active Facets for Robust and Nonselective Photocatalysis

Hongwei Huang,Ke Xiao,Ying He,Tierui Zhang,Fan Dong,Xin Du,Yihe Zhang

DOI: https://doi.org/10.1016/j.apcatb.2016.06.020

2016-01-01

Abstract:Synthesis of reactive exposing facets and p-n junction are of great importance for semiconductor photo catalysis. Herein, we develop a p-n junction BiOI@Bi12O17Cl2 heterostructure via facilely in situ depositing BiOI nanosheets on the surface of Bi12O17Cl2 plates. Owing to the charge inducement, the BiOI nanosheets are all vertically assembled onto the Bi12O17Cl2 large plates to form a unique front-lateral surfaces coupling heterostructure, which enables high exposure of {001} reactive exposing facets of BiOI. The photocatalytic properties are systematically evaluated by degrading multiform industrial contaminants and antibiotic, like 2,4-dichlorophenol (2,4-DCP), rhodamine B (RhB), phenol, bisphenol A (BPA), and tetracycline hydrochloride. It reveals that the BiOI@Bi12O17Cl2 heterostructure not only shows dramatically strengthened photocatalytic activity, but also unfold powerful and nonselective photooxidation ability under visible-light illumination. The photoelectrochemical characterizations demonstrated that the drastically promoted separation and transfer of charge carriers that derived from the benefits of BiOI {001} active facets and BiOI@Bi12O17Cl2 p-n junction are in charge of the high photo-activity. Detailed radicals detection and quantification experiments further corroborate our conclusions. The study may give us some new hints on designing novel heterostructured photoelectronic materials with integrating p-n junction and active exposing facets. (C) 2016 Elsevier B.V. All rights reserved.
Effects of Distortion of PO4 Tetrahedron on the Photocatalytic Performances of BiPO4

Chengsi Pan,Di Li,Xinguo Ma,Yi Chen,Yongfa Zhu

DOI: https://doi.org/10.1039/c1cy00261a

IF: 6.177

2011-01-01

Catalysis Science & Technology

Abstract:Three kinds of crystal phase BiPO4 (HBIP, nMBIP and mMBIP) were selectively synthesized by a hydrothermal method. The governed factors for the formation of three crystal phase of BiPO4 were both on the acidity of the solution and reaction temperature. The BiPO4 with nMBIP phase structure showed higher activity for degradation of MB solution under UV irradiation than HBIP and mMBIP. The catalytic activity per surface area activity of nMBIP (3.8×105 h−1 m−2) was about ten times higher than that of P25(1.4×104 h−1 m−2). The BiPO4 with nMBIP structure exhibited the highest activity due to the most distorted PO4 tetrahedron. The induce effect of the dipole moment derived from the distorted PO4 tetrahedron promoting the separation of e−/h+ pairs and further benefited for the photocatalytic reaction. This correlation may help to design and develop other oxoacid salt photocatalysts with high activity.
Interfacial C-O Covalent Bonds Improving the Piezo-Assisted Photocatalytic Performance of Bi4Ti3O12@Carbon Schottky Heterojunction

Kun Zhou,Wei Liu,Peifang Wang,Juan Chen,Huinan Che,Bin Liu,Yanhui Ao

DOI: https://doi.org/10.1016/j.cej.2023.148012

IF: 15.1

2024-01-01

Chemical Engineering Journal

Abstract:Rational design of piezo-assisted photocatalytic systems for simultaneously efficient ultilization of solar and mechanical energy is promising but still challenging. In this work, a novel Bi4Ti3O12@C (BTO@C) Schottky heterojunction with high piezo-assisted photocatalytic performance is rationaly designed, and the degradation reaction rate constant k for RhB reaches 0.092 min-1 in 30 min. Experimental results and density functional theory (DFT) calculations show that C-layer is tightly coated on the surface of BTO. Furthermore, C-O covalent bonds, which act as electron transfer channels, are formed at the interface of BTO and C-layer. Meanwhile, the presence of piezoelectric potential field of BTO@C under piezo-assisted photocatalytic conditions further pro-motes the transfer of photogenerated electrons from BTO to C-layer, which synergistically contributes to the performance enhancement. This work provides a new idea for the design and development of efficient piezo-assisted photocatalytic materials.
Construction of Fast Charge-Transferred 0d/2d Biobr/Bi2wo6 S-Scheme Heterojunction with Enhanced Photocatalytic Performance

Ben Pang,Jiaming Miao,Haoran Wang,Cheng Wu,Linxiang Wu,Guoliang Yuan,Xiong Wang

DOI: https://doi.org/10.1016/j.apsusc.2023.159104

IF: 6.7

2023-01-01

Applied Surface Science

Abstract:Novel Bi-based photocatalysts play an increasing role in dealing with environmental pollution and resource shortages. Among these Bi-based materials, BiOBr and Bi2WO6 have gained intensive attraction due to the appropriate energy band alignments and their anisotropic crystal structure. 0D/2D BiOBr/Bi2WO6 heterojunction was constructed by depositing BiOBr nanoparticles on few-layer Bi2WO6 nanosheets. The structure, optical property, and micromorphology of samples were characterized by XRD, XPS, UV-vis DRS, SEM, TEM, and AFM. The photoluminescence, photocurrent density, and electrochemical impedance spectroscopy (EIS) as well as the transient surface photovoltage (TSPV) were performed to explore the transfer of photoinduced charge carriers. The photocatalytic efficiency of the heterojunction is much improved, about 2.67 folds higher than that of pristine Bi2WO6. The fast separation and migration and the prolonged lifetime of photogenerated carriers in the BiOBr/Bi2WO6 heterojunction are validated by photoelectrochemical tests. The influence factors, versatility, and reusability of the heterojunction are also evaluated. Radical trapping test reveals that h(+) and O-2(-) are predominant active species and make a major contribution to the photoactivity of the BiOBr/Bi2WO6 heterojunction. The formed energy-band bending, the built-in electric field, and the S-scheme charge transfer strategy are thermodynamically and kinetically favorable for the photoactivity and stability of the heterojunction.
Tri-phase interface to enhance the performance of piezoelectric photocatalysis and recyclability of hydrophobic BiOI/BaTiO 3 heterojunction

Guanyu Liu,Hailiang Fei,Zhen Feng,Qian Shao,Tianzheng Zhao,Wenya Guo,Fen Li

DOI: https://doi.org/10.1016/j.jclepro.2024.140886

IF: 11.1

2024-01-30

Journal of Cleaner Production

Abstract:Piezo-photocatalysts exhibit remarkable efficacy in water pollutant treatment due to their efficient electron separation characteristics, while the interior recyclability and potentials for secondary pollution still limit the widespread application. In this study, a hydrophobically modified BiOI/BaTiO 3 heterostructure was constructed, which demonstrated exceptional piezo-photocatalytic performance in RhB degradation (nearly 100 % within 30min) under irradiation and ultrasound. The kinetic rate constant ( k ) was 1.7, 2.1 and 24.1 times higher than BiOI/BaTiO 3 without hydrophobically modifying, pure BiOI and BaTiO 3 , respectively. At the same time, the hydrophobically modified BiOI/BaTiO 3 also has excellent degradation performance for other pollutants such as MB and SMX, which can degrade MB of 96.1 % and SMX of 82.3 % respectively within 30min. Additionally, HBBT exhibits exceptional recyclability (over 90 wt% after one cycle) and a low risk for secondary pollution due to the hydrophobicity-induced floating effect. Furthermore, the enhancing mechanism of piezoelectricity synergistic photocatalysis by the built-in electric field and tri-phase catalysis of air-liquid-solid joint interface for RhB degradation was explored and ascertained. This study may provide new ideas for efficient and highly recyclable photocatalytic water pollutant materials from the perspective of interface engineering.

environmental sciences,green & sustainable science & technology,engineering, environmental
A High-Performance Bi2O3/Bi2SiO5 P-N Heterojunction Photocatalyst Induced by Phase Transition of Bi2O3

Haojie Lu,Qiang Hao,Tong Chen,Linghua Zhang,Daimei Chen,Chao Ma,Wenqing Yao,Yongfa Zhu

DOI: https://doi.org/10.1016/j.apcatb.2018.05.069

2018-01-01

Abstract:In this work, Bi2O3/Bi2SiO5 p-n heterojunction photocatalyst was successfully fabricated via a facile one-step synthesis using Bi(NO3)(3) and nano-SiO2 as precursors. With the increasing amount of SiO2, alpha-Bi2O3 gradually transferred into beta-Bi2O3, and Bi2O3/Bi2SiO5 p-n heterojunction was obtained at the same time. The as-prepared samples were systematically characterized by XRD, scanning electron microscopy (SEM), energy-dispersive spectrometry (EDS), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), UV-vis diffuse reflectance spectroscopy (DRS). The Bi2O3/Bi2SiO5 heterojunction photocatalysts exhibited higher photocatalytic activity than alpha-Bi2O3 on the degradation of organic pollutants under simulated sunlight irradiation. The enhanced photocatalytic activity could be ascribed to the larger specific surface area, the larger contact angle, the formation of beta-Bi2O3 and construction of p-n heterojunction. More importantly, the phase transition mechanism of Bi2O3 in Bi2O3/Bi2SiO5 heterojunction photocatalyst was proposed, which is significant for the theoretical study and application of photocatalytic materials.

Enhancement of Photocatalytic Activity for BiPO4via Phase Junction

Enhanced Photocatalytic Activity of Z-Scheme BiVO4 Heterophase Junction Via Giant Built-in Electric Field

Enhancement of Photoelectrochemical Performance of Bismuth Vanadate (Bivo4)-Based Photoanode by Building Phase-Junction Configurations

Enhancement of full-spectrum photocatalytic activity over BiPO4/Bi2WO6 composites

Construction of Α–β Phase Junction on Bi4V2O11 Via Electrospinning Retardation Effect and Its Promoted Photocatalytic Performance

A superior photocatalytic performance of a novel Bi2SiO5 flower-like microsphere via a phase junction.

Improved photo-redox activity of 2D Bi4Ti3O12−BiVO4−Bi4V2O10 heterostructure via piezoelectric-enhanced charge transfer effect

A superior photocatalytic performance of a novel Bi<sub>2</sub>SiO<sub>5</sub>flower-like microsphere via a phase junction

High-performance visible-light responsive BiPO4@ZnWO4 photocatalyst for enhancing photodegradation characteristics

Photocatalytic properties of Bi2WO6/BiPO4 Z-scheme photocatalysts induced by double internal electric fields

Enhancement of visible light mineralization ability and photocatalytic activity of BiPO 4 /BiOI

Synthesis and photocatalytic performance of Bi4Ti3O12/TiO2 heterojunction

Interfacial chemical bond modulated ultrathin PbBiO2Cl/Bi2O3 Z-scheme heterojunction for promoting charge separation and enhancing photocatalytic activity

Monoclinic BiPO4: Preparation, photocatalytic properties in experiment and theoretical calculation

In Situ Assembly of BiOI@Bi12O17Cl2 P-N Junction: Charge Induced Unique Front-Lateral Surfaces Coupling Heterostructure with High Exposure of BiOI {001} Active Facets for Robust and Nonselective Photocatalysis

Effects of Distortion of PO4 Tetrahedron on the Photocatalytic Performances of BiPO4

Interfacial C-O Covalent Bonds Improving the Piezo-Assisted Photocatalytic Performance of Bi4Ti3O12@Carbon Schottky Heterojunction

Construction of Fast Charge-Transferred 0d/2d Biobr/Bi2wo6 S-Scheme Heterojunction with Enhanced Photocatalytic Performance

Tri-phase interface to enhance the performance of piezoelectric photocatalysis and recyclability of hydrophobic BiOI/BaTiO 3 heterojunction

A High-Performance Bi2O3/Bi2SiO5 P-N Heterojunction Photocatalyst Induced by Phase Transition of Bi2O3