Abstract:In this article, a second-order 3-D bandpass polarization-rotating surface (PRS) that can rotate vertically polarized incident waves by 90° and facilitate the output of horizontally polarized waves is presented. First, each PRS element is constructed using a pair of parallel-coupled slotline sections with open-short-ends, which are etched on vertically and horizontally inserted single-layer printed circuit boards (PCBs), respectively. Then, under vertically polarized incident waves, one of the slotline sections can convert the incident spatial waves into guided waves through its open end. After which, the guided waves are coupled to the other slotline section and the electric field direction will be rotated by 90° through the coupling path, thus leading to a 90° polarization rotation. Subsequently, a direct coupling matrix is used to synthesize and design the proposed PRS based on the microwave filter theory. Investigations reveal that a desirable bandpass filtering response can be obtained by properly designing the internal coupling of the parallel-coupled slotline sections and the external coupling between the incident spatial waves and the PRS. To validate the design concept, two examples with different fractional bandwidths at the same center frequency of 5 GHz and the same return loss of 20 dB were designed, fabricated, and measured. Consequently, a good agreement was attained among the results from coupling matrices, full-wave electromagnetic (EM) simulations, and measurements. All the results demonstrate that the proposed PRSs feature simple topologies, easy fabrications, low insertion losses (ILs), high polarization-rotating ratios, and stable filtering performances under large oblique incidences. In addition, our proposed method can be applied to design higher-order PRSs with sharpened out-of-band roll-off skirts.

Multi-band Circular Polarizer Based on a Twisted Triple Split-Ring Resonator

Design of Wide-Angle and Broad-Band Two-Dimensional Photonic Crystal Polarization Splitter by the Automatic Shaping Mechanism

Compact Circular Polarizer Based on Chiral Twisted Double Split-Ring Resonator

Design of A Compact Polarizing Beam Splitter Based on A Photonic Crystal Ring Resonator with A Triangular Lattice

A Multi-functional Frequency Selective Polarization Converter Based on Substrate Integrated Waveguide Cavities

Tri-band high-efficiency circular polarization convertor based on double-split-ring resonator structures

Circular polarizer based on chiral twisted structure

Design of Circular/Dual-Frequency Linear Polarization Antennas Based on the Anisotropic Complementary Split Ring Resonator

Design of Circular Polarisation Microstrip Patch Antennas with Complementary Split Ring Resonator

Asymmetric Fission Transmission of Linear-to-Circular Polarization Converter Using Bi-layer Split Ring Structure

Single-cavity Triangular Substrate Integrated Waveguide Bandpass Filter with Complementary Triangular Split Ring Resonator

Single- and Dual-Band High-Order Polarization Rotating Frequency Selective Surface

Ultra-thin circular polarization analyzer based on the metal rectangular split-ring resonators.

A linear-to-circular polarizer using split ring resonators

Synthesis of 3-D Polarization-Rotating Surface Based on Orthogonally Inserted Parallel-Coupled Slotlines

Dual-Band Circular Polarizers with Versatile Polarization Conversions Based on Aperture-Coupled Patch Resonators

Broadband Circular Polarizer Based on Plasmon Hybridizations

Polarization Conversion in Terahertz Planar Metamaterial Composed of Split-Ring Resonators

Dual-frequency Linear-to-circular Polarization Converter with Half Transmission and Half Reflection Based on SRR Coupling Metamaterial

Novel Broad Band FSS Dual-Layer Circular Polarizer Based on Quarter Wave Plate

Broadband Resonance-Free Septum Circular Polarizer Operating Above 200 GHz