Abstract:The solidification behaviours and microstructural characteristics of both ZA27/SiCp composites and monolithic ZA27 alloy were studied by using differential scanning calorimetry, scanning electron microscopy, transmission electron microscopy, electron probe microanalysis, and X-ray diffraction, It was found that there were differences in the transformation temperature and volume fraction of the phases, although the solidification process was almost identical for the composite and the monolithic alloy. The incorporation of SiC particles in the ZA27 alloy led to slight refinement of primary grains and reduced volume fraction of eutectic-like phase. The SiC particles obstructed Zn diffusion in the residual melt during the formation of proeutectic beta phase, but promoted Zn diffusion from alpha (Al) to eta (Zn) phase during eutectoid transformation. During solidification, Cu was mainly segregated in the final solidification regions; Mg was present not only in the matrix but also on SiC particles; and oxide inclusions were mainly distributed around SiC particles, The matrix microstructure for both materials mainly consisted of primary cores of Al rich alpha + eta eutectoid; beta' phase resulting from the eutectoid transformation of the proeutectic beta phase; and Zn rich alpha + eta eutectoid resulting from the eutectoid transformation of the eutectic-like phase. The SiC particles were mainly distributed around the primary grains, Several new phases based on the Al-Zn-Mg-Cu system and interfacial reaction products, including Al21Fe3Si, Cu5Zn8, Mg6Cu3Al7, MgAl2O4, and amorphous oxide inclusions, were identified in the final solidification regions. The nucleation of both primary alpha phase and eutectic-like alpha + eta phase at the surface of SIC particles and their crystallographic orientation relationships were investigated theoretically and experimentally. No distinct crystallographic orientation relationship between the matrix and SiC has been identified, although the mismatch between (0001)(SiC) and (111)(alpha) was calculated to be as small as 7.6%.

Microstructure evolution of SiC p /ZM6 (Mg–Nd–Zn) magnesium matrix composite in the semi-solid state

Solidification and microstructure of ZA27/SiCp composite fabricated by mechanical-electromagnetic combination stirring process

Preparation and properties of nano-sized SiC particles reinforced AZ91D magnesium matrix composites

Effects of (micron+submicron+nano) Multisized SiC Particles on Microstructure and Mechanical Properties of Magnesium Matrix Composites

Microstructures, Mechanical Properties, and Wear Resistances of Thixoextruded SiC P /WE43 Magnesium Matrix Composites

Microstructure and Mechanical Properties of Sicp/Mg-Zn-Ca Composites Fabricated by Stir Casting

Effect of SiC Particle Addition on Microstructure of Mg2Si/AI Composite

Effect of Submicron Size SiC Particulates on Microstructure and Mechanical Properties of AZ91 Magnesium Matrix Composites

Microstructures, Interface Structure and Room Temperature Tensile Properties of Magnesium Materials Reinforced by High Content Submicron SiCp

Influence of characteristic parameters of SiC reinforcements on mechanical properties of AlSi10Mg matrix composites by powder metallurgy

Characteristics and Mechanical Properties of Magnesium Matrix Composites Reinforced with Micron/submicron/nano SiC Particles

Fabrication, Microstructure and Mechanical Properties of a SiCw/ZK51A Mg Composite by Semi-Solid Extrusion Directly Following Liquid Infiltration

Solidification Microstructure of SiC Particulate Reinforced Zn–Al Composites under Ultrasonic Exposure

Effects Of (Micron Plus Submicron Plus Nano) Multisized Sic Particles On Microstructure And Mechanical Properties Of Magnesium Matrix Composites

Centrifugally Cast Zn–27Al–xMg–ySi Alloys and Their in Situ (mg2si + Si)/ZA27 Composites

Fabrication of SiC Particles-Reinforced Magnesium Matrix Composite by Ultrasonic Vibration

Microstructure Evolution and Mechanical Behaviors of SiCp/CNTs Hybrid Reinforced Al-Si-Cu-Mg Composite by Semi-solid Stir Casting

Effect of Hot Extrusion on Microstructures and Mechanical Properties of SiC Nanoparticles Reinforced Magnesium Matrix Composite

Effect of SiC Particle on Microstructure and Properties of M40/ZM6 Composites

Effect of Mg Addition on the Microstructure and Mechanical Properties of SiC Nanowires Reinforced 6061al Matrix Composite

Study on Fracture Behavior of Particulate Reinforced Magnesium Matrix Composite Using in Situ SEM