Abstract:This article presents a novel and feasible approach for researching the quantity of the ceramic phase and component optimization in high-temperature titanium alloys with small trace amounts of ceramic phases. Different near-α titanium alloys with varying yttrium and boron contents were prepared through the utilization of a vacuum non-consumable arc furnace melting method. The alloy used was a Ti-5.9Al-4Sn-3.9Zr-3.8Mo-0.4Si base. Its microstructure, texture, mechanical properties, and fracture behavior were studied. The observation of the as-cast structure shows that the addition of different doses of trace Y and B elements significantly refines both the original β grains and α grains. Moreover, the addition of the B element transforms the Widmanstätten structure in the titanium alloy structure into a basketweave structure. The addition of Y can refine the grain structure, improve the uniformity of the matrix structure, and act as a strong deoxidizer, which will take away the oxygen in the matrix and purify it. The TiB whiskers generated with the addition of B promotes dynamic recrystallization behavior and leads to more equiaxed α grains being precipitated around them, resulting in a significant refinement of the microstructure of the as-cast alloy. After adding a small amount of B, the texture strength of the α phase is significantly reduced, indicating that TiB whiskers inhibit the formation of texture. After conducting performance screening and structure analysis, the study supplements the analysis of Y’s regulation of the titanium alloy structure. The regulation is primarily explained by combining the results of the analysis of boron content, phase diagram analysis, mechanical properties, and fracture analysis. The mechanical analysis introduces the unique load transfer strengthening of TiB whiskers combined with an analysis of high-temperature mechanical properties, as the threshold for addition. The optimal amounts of Y and B additions are 0.6 wt% and 0.8 wt%, respectively. The optimized alloy obtained under this condition can achieve a tensile strength of 950 Mpa at 500 °C without any plastic deformation or heat treatment.

Modification of the Α-Ti Laths to Near Equiaxed Α-Ti Grains in As-Sintered Titanium and Titanium Alloys by a Small Addition of Boron

Effect of Trace Boron Addition on the Microstructural Evolution and Mechanical Properties in Ti45al8nb2cr-B Alloys

Simultaneously improved strength and ductility of low-cost Ti-Al-V-Fe alloy with TiB 2 addition and thermomechanical processing

Unexpected strengthening and toughening effects of B minor alloying in a new low-density near-α titanium alloy

Effects of Boron Addition on the Microstructure and Mechanical Property of As-Cast Ti-46.5al-8nb Alloy

Solidification Features of Ti45Al Alloys with Different Boron Addition

Investigation on the Optimal Amount of Y and B Elements in High-Temperature Titanium Alloy Ti-5.9Al-4Sn-3.9Zr-3.8Mo-0.4Si-xY-yB

Effect of TiB2 addition on microstructure and fluidity of cast TiAl alloy

Modification of Microstructure and Tensile Property of TiBw/near-α Ti Composites by Tailoring TiBw Distribution and Heat Treatment

Effect of Trace B on the Microstructure and Mechanical Properties of a Newly Near α High Temperature Titanium Alloy

Microstructural evolution in laser melted boron alloyed Ti-6Al-4V

Effects of Boron on Microstructure Evolution and Mechanical Properties in Ti46Al8Nb2.6C0.8Ta Alloys

Microstructure characterization, mechanical properties and toughening mechanism of TiB 2 -containing conventional cast TiAl-based alloy

Grain Refinement by Trace Tib2 Addition in Conventional Cast Tial-Based Alloy

Boride Formation, Microstructure Evolution, and Mechanical Properties of Ti42Al6Nb2.6C0.8Ta Alloyed by Boron

Enhanced Strength and Ductility in Ti46Al4Nb1Mo Alloys Via Boron Addition

Effects of boron, Hf and Ta content on boride morphology and microstructure of β-solidified γ-TiAl alloys

As-cast Structure Refinement of Ti-46Al Alloy by Hafnium and Boron Additions

Effect of Titanium Modification on Microstructure and Impact Toughness of High-Boron Multi-Component Alloy

Microstructure and Mechanical Properties Evolution of High-Temperature Titanium Alloys with In Situ Synthesized TiB Whiskers

Effects of Forging Deformation on Variant Selection and Morphology of Α in TiB/near Α-Ti Composites