Abstract:This study proposes a clustered dynamic adaptive chemistry (CDAC) method, which uses an iterative K-means algorithm to partition the computational cells into different groups according to their similarity in terms of the temperature and significant species compositions. Taking advantage of the clustered cells, the averaged thermo-chemical properties of the cells in the respective clusters are then used to identify the adaptive dynamic reduced chemistry through the method of direct relation graph with error propagation (DRGEP). Moreover, the integration of the chemical source term, which commonly dominates the computational effort in reactive flow simulations, is now performed using the dynamic adaptive reduced chemistry at the cluster level instead of the cell level. With this CDAC method, the on-the-fly DRGEP process as well as the chemistry integration only needs to be conducted at the cluster level, dramatically reducing the unnecessary repeated computation for similar computational cells. In addition, the adaptive dynamic reduced chemistry further accelerates the chemistry integration process due to less ordinary differential equations (ODEs) to be solved for each cluster. This newly proposed CDAC method was tested in multi-dimensional homogeneous charged compression ignition engine (HCCI), direct injection compression ignition (DICI) engine and constant volume chamber combustion (CVCC) fueled with diesel, biodiesel and kerosene through the use of their respective surrogate fuel mechanisms under different operating conditions. The performance of CDAC in terms of accuracy and efficiency were extensively analyzed and discussed using different user-defined parameters, mechanisms with different surrogate components and number of species as well as different meshes with different number of grid cells. Based on this analysis, the error tolerances in DRGEP and the error tolerances of the temperature and significant species' mass fraction are recommended as: epsilon(d) <= 0.001, epsilon(T) 20K and epsilon(Y) <= 0.01 to achieve less than 0.1% integral error. With these recommended user-defined tolerances, it can be observed that the current CDAC method is able to accurately predict the in-cylinder pressure as well as the species profile in HCCI, DICI and the flame lift-off length in CVCC when compared with the full chemistry calculations as well as the experimental results. Moreover, with the recommended user defined error tolerances and a chemical kinetic model of 112 species, this CDAC method is capable of achieving a computational time speed-up factor of more than 3 compared to the conventional DAC and of almost 5 compared to the full chemistry. Finally, the CDAC method coupled CFD was applied to simulate a diesel DICI engine under three different engine speeds with a detailed primary reference fuel (PRF) mechanism of more than 1000 species. The 3-D simulation could be finished in acceptable CPU time while being able to well capture the experimental in-cylinder pressure and heat release rate for all the three engine speeds. (C) 2018 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Optimizing Progress Variable Definition in Flamelet-Based Dimension Reduction in Combustion

Performance assessment of flamelet models in flame-resolved LES of a high Karlovitz methane/air stratified premixed jet flame

A Direct Numerical Simulation Study of Flame Structure and Stabilization of an Experimental High Ka CH4/air Premixed Jet Flame

Direct numerical simulations of rich premixed turbulent n-dodecane/air flames at diesel engine conditions

Large Eddy Simulation/dynamic Thickened Flame Modeling of a High Karlovitz Number Turbulent Premixed Jet Flame

Regularization of Reaction Progress Variable for Application to Flamelet-Based Combustion Models

Multi-dimensional and Transient Effects on Flamelet Modeling for Turbulent Pulverized Coal Combustion

An Improved Flamelet/progress Variable Modeling for Supersonic Combustion

Evaluation of Flamelet/Progress Variable Model for Laminar Pulverized Coal Combustion

Simulations of a turbulent non-premixed flame using combined dimension reduction and tabulation for combustion chemistry

Experimental Investigation of Low-Temperature Autoignition in Turbulent Premixed Swirling Flames

Computational Acceleration of Multi-Dimensional Reactive Flow Modelling Using Diesel/biodiesel/jet-Fuel Surrogate Mechanisms Via a Clustered Dynamic Adaptive Chemistry Method

Study of Partially-Premixed Combustion Using Combustion Models Based on Flamelet Concept

Application of Pareto-efficient combustion modeling framework to large eddy simulations of turbulent reacting flows

Multi-Dimensional Flamelet Manifolds for Laminar Partially Premixed Flame

A Novel Method for Chemistry Tabulation of Strained Premixed/stratified Flames Based on Principal Component Analysis

A Generalized Flamelet Tabulation Method for Partially Premixed Combustion

Hybrid Flamelet/Progress Variable Approach for NO Prediction in Pulverized Coal Flames

Brief Review of Recent Achievements in the Flamelet Manifold Selection and Probability Density Distribution for Flamelet Manifold Variables

Choice of reaction progress variable under preferential diffusion effects in turbulent syngas combustion based on detailed chemistry direct numerical simulations

Large eddy simulation of multi-regime combustion with a two-progress variable approach for carbon monoxide