Abstract:In this paper, a chitosan-modified nano-silver solution was used as the core material of an antibacterial agent, and melamine formaldehyde resin was coated onto the core material to obtain the antibacterial microcapsules. The core/wall ratio, the stirring rate, the mass ratio of chitosan to silver ions, and the concentration of the emulsifier were used to carry out four-factor and three-level orthogonal experiments to explore the most significant factors affecting the coverage rate and output of microcapsules and the best preparation technology. The results showed that the concentration of the emulsifier was the most important factor affecting the preparation of microcapsules. The higher the concentration of the emulsifier, the better the dispersed morphology of microcapsules, and the higher the coverage rate, up to 44.0%. The antibacterial coating was prepared by mixing microcapsules with a waterborne primer at a content of 4.0%. Its optical properties, mechanical properties, and antibacterial properties were analyzed. By increasing the concentration of the emulsifier, the gloss of the coating showed a trend of first increasing and then decreasing. When the emulsifier concentration was 2.0%, the gloss of the Andoung wood surface coating reached the maximum value of 21.23%. The influence of emulsifier concentration on the color difference of coating had no obvious law, and it was negatively related to the light transmittance. In terms of mechanical properties, the concentration of the emulsifier is directly proportional to the hardness and impact resistance of the coating, with the maximum reaching 31 kg·cm, and is negatively related to adhesion and roughness. In terms of antibacterial properties, the higher the concentration of the emulsifier, the better the antibacterial properties of the coating. When the concentration of the emulsifier was 4.0%, the antibacterial rates of coating which coated the glass substrate were 71.3% and 80.0% for Escherichia coli and Staphylococcus aureus, respectively. The antibacterial rates of the Andoung wood surface coating reached the maximum, which were 68.4% and 73.2%, respectively, and the antibacterial performance was excellent. In this study, an efficient antibacterial microcapsule for waterborne coatings was prepared, which provided the reference value for the application of antibacterial microcapsules in waterborne coatings.

Synthesis and Quantum Chemical Calculation of Benzamide Derivatives Containing Capsaicin and Their Bacteriostatic and Antifouling Properties

Self-polishing antifouling coatings based on benzamide derivatives containing capsaicin

Performance assessment of capsaicin derivatives containing amide groups used as active substances for antifouling coatings

Studies on the Synthesis, Pungency and Anti-Biofouling Performance of Capsaicin Analogues

Synthesis and evaluation of phenolic capsaicin-derived self-polymers for antibacterial activity

Synthesis and Antimicrobial Evaluation of New Benzofuran Derivatives

Design, Synthesis, and Antimicrobial Activity of Amide Derivatives Containing Cyclopropane

1,2,4-Triazolo-quinazolinones as Effective Antifoulants: Molecular Design, Synthesis, and Biological Evaluation

Antibiofilm and Antimicrobial Potentials of Novel Synthesized Sulfur Camphor Derivatives

Design, Synthesis and Antimicrobial Evaluation of Novel Benzoxazole Derivatives.

Urushiol-Based Benzoxazine Containing Sulfobetaine Groups for Sustainable Marine Antifouling Applications

Capsaicin-based silicone antifouling coating with enhanced interlocking adhesion via SIPN

Synthetic Optimization and Antibacterial Activity of Novel Benzodioxepine-Biphenyl Amide Derivatives

Design, Synthesis, Antibacterial Activity, and Mechanisms of Novel Benzofuran Derivatives Containing Disulfide Moieties

Terpolymer resin containing bioinspired borneol and controlled release of camphor: Synthesis and antifouling coating application

Preparation and Properties of Environmentally Friendly Marine Antifouling Coatings Based on a Collaborative Strategy

Synthesis, crystal structure, and antimicrobial evaluation of novel 4-oxyquinazoline derivatives containing a benzimidazole moiety

Design, synthesis and biological evaluations of quaternization harman analogues as potential antibacterial agents

A New Sight into Bio-Based Polybenzoxazine: From Tunable Thermal and Mechanical Properties to Excellent Marine Antifouling Performance

Synthetic Analogue of Butenolide as an Antifouling Agent

Preparation of Chitosan-Modified Nano-Silver Solution Microcapsules and Their Effects on Antibacterial Properties of Waterborne Coatings