Abstract:Recently, Carbon Nanotubes (CNTs) are drawing considerable attention of researchers for reinforcing cementitious materials due to their excellent mechanical properties and high aspect ratio (length-to-diameter ratio). However, CNTs might not disperse well within the cement matrix, resulting in little improvement or even degradation of concrete properties. The uncertainty in producing the consistent results in different studies might be attributed to multiple interactions between the experimental variables affecting the nanotube dispersion and the final properties of CNT-cement nanocomposites. Therefore, this research mainly focused on proposing equations that can reliably capture these interactions in order to correlate CNT dispersion with the mechanical properties. The main experimental variables studied included CNT concentration, aspect ratio, ultrasonication energy, ultrasonication amplitude, surfactant-to-CNTs ratio, water-to-cement ratio, sand-to-cement ratio, and hydration age of specimen. The study reported in this research was conducted in two parts: experimental program and modeling. In the experimental part of this research, a total of 63 different mix proportions were used to evaluate the flowability, mechanical properties, and durability characteristics of cement pastes and mortars containing CNTs. Using experimental test results reported in this study and the literature, three critical relations were proposed to consider the CNT dispersion, cement matrix composition, and hydration age of cement. The proposed critical relations were then added to available theoretical models in the literature. The flexural strength and elastic modulus of CNT-cement nanocomposites were predicted through a state-of-the-art probabilistic model using a Bayesian methodology. Finally, the developed probabilistic models were used to identify the optimum ranges of the experimental variables to maximize the mechanical properties. This was done through computing the conditional probability of not meeting the specified design requirement. The experimental results indicated that addition of CNTs could significantly improve different properties of cementitious materials, if the optimum range of each variable was used. Also, to achieve the desired mechanical properties, various combinations of the experimental variables might be used. The proposed prediction models were shown to capture the interactions between the experimental variables for predicting the mechanical properties within ±15% and ±18% of the experimental test results for flexural strength and elastic modulus, respectively. Based on the findings of this research, contour plots were developed to provide practical guidelines for future engineers to design CNT-cement nanocomposites.

Characterisation and Simulation of Highly Dispersed Carbon Nanofibre-Reinforced Cement Materials

Synergistic effects of CNTs/SiO2 composite fillers on mechanical properties of cement composites

Role of Carbon Nanotube in Reinforcing Cementitious Materials: an Experimental and Coarse-Grained Molecular Dynamics Study

Effect of silica fume-enhanced carbon nanotube dispersion on the strength and damping properties of cement composites

Experimental study of impact mechanical and microstructural properties of modified carbon fiber reinforced concrete

Modification Effects of Carbon Nanotube Dispersion on the Mechanical Properties, Pore Structure, and Microstructure of Cement Mortar

Understanding the role of carbon nanotubes in low-carbon concrete: From experiment to molecular dynamics

Effect of Carbon Nanotube and Styrene-Acrylic Emulsion Additives on Microstructure and Mechanical Characteristics of Cement Paste

Reinforcement of Cement Nanocomposites through Optimization of Mixing Ratio between Carbon Nanotube and Polymer Dispersing Agent

Multiscale simulation of mechanical properties and microstructure of CNT-reinforced cement-based composites

Reinforcement Effect and Mechanism of Carbon Fibers to Mechanical and Electrically Conductive Properties of Cement-Based Materials

Effects of Three-Dimensional Graphene–Carbon Nanotube Hybrid on the Mechanical Properties and Microstructure of Cement Paste

Experimental study on physical and mechanical properties and micro mechanism of carbon nanotubes cement-based composites

Design and predicting performance of carbon nanotube reinforced cementitious materials : mechanical properties and dispersion characteristics.

Mechanical and damping properties of CNT-reinforced cementitious composites

Mechanical Characterization of MWCNT-Reinforced Cement Paste: Experimental and Multiscale Computational Investigation

Effect of Nanoscale Silica Fume and Carbon Nanotube on Damping Capacity of Cement-based Composite

Compressive Strength and Microstructure of Multi-Wall Carbon Nanotubes Reinforced Cement Composites

Effect Of Composite Nano-Addition On Mechanics Strength And Microstructure Of Cement Paste

Mechanical Performance of Cementitious Materials Reinforced with Polyethylene Fibers and Carbon Nanotubes

Carbon-based nanomaterials engineered cement composites: a review