Abstract:Activated sludge in a sequencing batch reactor (SBR) is subjected to alternating feast-and-famine conditions, which may result in the enhanced production of microbial products: extracellular polymeric substances (EPS), soluble microbial products (SMP), and internal storage products (XSTO). In this work, the long-term formation of these three microbial products by activated sludge in an SBR is investigated using an expanded unified model with a parallel experimental study. We also use the model to compare the impacts in an SBR to those in a continuous-flow activated sludge system. The model captures all experimental trends for all components with solids retention time (SRT) for global steady state and within a cycle. At an SRT of 20 days, the active microorganisms constitute about 28% of the mixed liquor volatile suspended solids (MLVSS); the remaining biomass is comprised of residual inert biomass (XI) of 40%, EPS of 31%, and XSTO of ∼1%. The active biomass becomes a smaller fraction with the increasing SRT, while the inert biomass becomes increasingly dominant. For soluble components, effluent chemical oxygen demand (COD) is dominated by SMP, which varies to some degree in a cycle, peaking as external substrate becomes depleted. Within the SBR cycle, external substrate (S) declines strongly in the first part of the cycle, and SMP shows a small peak at the time of S depletion. XSTO is the only biomass component that varies significantly during the cycle. It peaks at the time that the input substrate (S) is depleted. Simulation for a continuous-flow activated sludge system and comparison with an SBR reveals that the constant “famine” conditions of the continuous system lead to lower EPS and XSTO, but higher MLVSS and XI.

Microbial products of activated sludge in biological wastewater treatment systems: A critical review

Roles of Bacterial and Epistylis Populations in Aerobic Granular SBRs Treating Domestic and Synthetic Wastewaters

Biochemical Properties of Sludge Derived Hydrothermal Liquid Products and Microbial Response of Wastewater Treatment

Dynamic Characteristics of Soluble Microbial Products in a Granular Sludge Reactor

Activated Sludge and Other Aerobic Suspended Culture Processes.

Long-term formation of microbial products in a sequencing batch reactor.

Fractionating Soluble Microbial Products in the Activated Sludge Process

Modeling microbial products in activated sludge under feast-famine conditions.

Main microbial community in activated sludge and the research method of it

Modeling and Simulation of the Formation and Utilization of Microbial Products in Aerobic Granular Sludge

Understanding the Microbial Internal Storage Turnover in Wastewater Treatment: Retrospect, Prospect, and Challenge

Formation of Distinct Soluble Microbial Products by Activated Sludge: Kinetic Analysis and Quantitative Determination

Growth, maintenance and product formation of autotrophs in activated sludge: taking the nitrite-oxidizing bacteria as an example.

Microalgal-bacterial granular sludge for municipal wastewater treatment: From concept to practice

The mechanisms of granulation of activated sludge in wastewater treatment, its optimization, and impact on effluent quality

Characterization of autotrophic and heterotrophic soluble microbial product (SMP) fractions from activated sludge.

Behaviour of soluble microbial products in a membrane bioreactor

Soluble Microbial Products and Their Implications in Mixed Culture Biotechnology

Model-based Characterization of Endogenous Maintenance, Cell Death and Predation Processes of Activated Sludge in Sequencing Batch Reactors

Characterization and Modeling of the Soluble Microbial Products in Membrane Bioreactor

Excess Sludge Production in Membrane Bioreactors: A Theoretical Investigation