Abstract:Organic dyes, especially the harmful cationic dye methyl orange (MO), are emerging pollutants. The development of new materials for their efficient adsorption and removal is thus of great significance. Porous organic polymers (POPs) such as hyper-cross-linked polymers, covalent organic frameworks, conjugated microporous polymers, and polymers with intrinsic microporosity are a new class of materials constructed from organic molecular building blocks. To design POPs both with good porosity and task-specific functionalization is still a critical challenge. In this study, we have demonstrated a simple one-step method for the synthesis of the hyper-cross-linked aromatic triazine porous polymer (HAPP) via the Friedel-Crafts reaction. The resultant porous polymer was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, elemental analysis (EA), thermo-gravimetric analysis (TGA), solid-state C-13 nuclear magnetic resonance (C-1(3) NMR), and nitrogen adsorption-desorption isotherms. The results show that HAPP is a rough, irregular morphology, porous organic polymer that is amorphous in nature. The novel polymer showed high Brunauer-Emmett-Teller surface area (of up to 104.36 m(2).g(-1)), porosity, and physicochemical stability. Owing to the presence of N heteroatom pore surfaces in the network, the material exhibited a maximum adsorption capacity of 249.3 mg.g(-1) for MO from aqueous solutions at room temperature. This is higher than that of some reported porous materials under the same conditions. To explain this phenomenon more clearly, theoretical quantum calculations were performed via the DFT method using Gaussian 09 software and Multiwfn version 3.4.1. It is performed to analyze the properties and electrostatic potential (ESP) of the HAPP monomer and MO. The results indicated that the N heteroatom of HAPP can easily develop strong interactions with MO, supporting the efficient adsorption of MO. The parameters studied include the physical and chemical properties of adsorption, pH, contact time, and initial concentrations. The percentage of MO removal increased as the pH was increased from 2 to 4. The optimum pH required for maximum adsorption was found to be 5.6. Adsorption kinetics data were modeled using the pseudo-first-order and pseudo-second-order models. The results indicate that the second-order model best describes the kinetic adsorption data. The adsorption isotherms revealed a good fit with the Langmuir model. More importantly, the HAPP can be regenerated effectively and recycled at least five times without significant loss of adsorption capacity. Therefore, it is believed that HAPPs with hierarchical porous structures, high surface areas, and physicochemical stability are promising candidates for the purification and treatment of dyes in solution.

Removal of Methyl Orange from Aqueous Solution by Mineral-Based Porous Granulated Material

Simultaneous Removal of Cationic and Anionic Dyes from Environmental Water Using Montmorillonite-Pillared Graphene Oxide

Waste-cellulose-derived Porous Carbon Adsorbents for Methyl Orange Removal

Synthesis of MnO2 Hollow Nanospheres through Selective Etching Method as an Effective Absorbent to Remove Methyl Orange from Aqueous Solution

Removal of Methyl Orange Dye by High Surface Area Biomass Activated Carbon Prepared from Bamboo Fibers

Innovative eco-friendly methyl orange removal: Mechanism, kinetic, and thermodynamic study using starch cryogel-integrated mesoporous silica nanoparticles

Synthesis of mesoporous-structured MIL-68(Al)/MCM-41-NH2 for methyl orange adsorption: Optimization and Selectivity

Enhanced Adsorption of Methyl Orange by Mongolian Montmorillonite after Aluminum Pillaring

Development of graphene oxide and magnesia immobilized kaolin supported dual biopolymeric hybrid material for methyl orange and malachite green removal from water

Enhanced Removal of Methyl Orange on Exfoliated Montmorillonite/chitosan Gel in Presence of Methylene Blue.

MnOx-modified ZnAl-LDOs As High-Performance Adsorbent for the Removal of Methyl Orange

Synthesis and Characterization of an Inorganic/organic-Modified Bentonite and Its Application in Methyl Orange Water Treatment

Removal performance and adsorption kinetics of dyes by a Co-based metal organic framework

Efficient adsorptive removal of two anionic dyes (methyl orange and methyl red) with MOF‐525: Adsorption isotherms and kinetics studies

Removal of Methyl Orange from Aqueous Solutions by a Novel Hyper-Cross-Linked Aromatic Triazine Porous Polymer

Removal of Methyl Orange from Aqueous Solution by Adsorption Onto a Hydrogel Composite

[Preparation of melamine-functionalized porous organic polymer and its adsorption properties for methyl orange]

Morphology controlled fabrication of porous magnesium oxide nanostructures for the efficient elimination of methyl orange

Magnetic calcinated cobalt ferrite/magnesium aluminum hydrotalcite composite for enhanced adsorption of methyl orange

Removal of methyl orange from aqueous solutions by magnetic maghemite/chitosan nanocomposite films: Adsorption kinetics and equilibrium

Synthesis of a Novel Magnetic Biochar from Lemon Peels via Impregnation-Pyrolysis for the Removal of Methyl Orange from Wastewater