Abstract:The table of contents graphic illustrates the structure of a QWIP integrated with a dimerized grating. Based on this design, by exciting the quasi‐BIC mode and controlling the critical coupling, the QWIP achieves a narrowband absorption, high peak absorptance, and suppresses dark current. Consequently, the background‐limited detectivity of this device reaches 92 times that of an ideal photoconductive detector. During infrared detection, the thermal radiation from the background generates substantial photon noise and thus severely limit the capability of an infrared detector to identify a target. Going beyond this limitation has been a long‐standing challenge in the development of infrared detectors. This paper proposes to break this limitation by creating a narrow photoresponse band with a high peak responsivity to reject the background radiation and enhance the responsivity to the target with characteristic emission lines. This scheme is numerically demonstrated in a dimerized grating integrated quantum well infrared photodetector, based on critical coupling with a Brillouin zone folding induced quasi‐bound state in the continuum (BIC). The asymmetric deformation of the grating structure folds the photonic band and generates a quasi‐BIC with a tunable high radiation Q factor (QR) at the Γ point. By reducing the doping concentration of the quantum wells for a high absorption Q factor (QA) and tuning the QR to make QR = QA for critical coupling, a narrowband photoresponse with a high peak responsivity is achieved and the background‐limited specific detectivity of 4.55 × 1012 cm Hz1/2 W−1 is obtained for a 2π field of view, surpassing the ideal‐photoconductor limit by 92 times.

Interband-cascade Infrared Photodetectors with Superlattice Absorbers

GaAs/AlGaAs Quantum-Well Infrared Photodetectors on GaAs-on-Si Substrates

Single-mode Interband Cascade Laser Based on V-coupled Cavity with 210 Nm Wavelength Tuning Range Near 3 Μm.

High Speed Mid-Infrared Interband Cascade Photodetector Based on InAs/GaSb Type-II Superlattice

Very long wave infrared quantum cascade detector with a twin-well absorption region

Monolithic Chalcogenide Glass Waveguide Integrated Interband Cascaded Laser

Interband Cascade Photonic Integrated Circuits on Native III-V Chip

High-performance mid-infrared quantum dot infrared photodetectors

Single-Mode Tunable Interband Cascade Laser Emitting at 3.4 Μm with a Wide Tuning Range over 100 Nm

High responsivity quantum cascade detectors with bound-to-miniband diagonal transition

A superlattice-based resonant cavity-enhanced photodetector operating in the long-wavelength infrared

Mid-infrared Widely Tunable Single-Mode Interband Cascade Lasers Based on V-coupled Cavities.

Quantum-Tuned Cascade Multijunction Infrared Photodetector

Detectivity Enhancement in Cascade Infrared Upconverter Utilizing Alinp Hole-Blocking Layer

High-Performance Very Long Wave Infrared Quantum Cascade Detector Grown by MOCVD

Achieving Ultra‐High Background‐Limited Detectivity by a Brillouin Zone Folding Induced Quasi‐Bound State in the Continuum

InP-based High-Performance Extended Short Wavelength P-B-n Infrared Photodetector with InGaAs/GaAsSb Type-Ii Superlattice Absorption Layer

An InP-Based Mid-Wave Infrared Up-Converter Utilizing Cascade Carrier Transportation

Temperature Dependence of Novel Single-Photon Detectors in the Long-Wavelength Infrared Range

A GaAs-based Up-Converter for Mid-Infrared Detection Utilizing Quantum Cascade Transport

Very long wave infrared quantum cascade detector based on modular band structure