Abstract:Eddy current damping has been widely applied in mechanical engineering; however, its adaptation for civil engineering applications remains rather limited due to its low density of energy dissipation. This study presents the development of a new type of eddy current damper and theoretical and experimental characterization of its damping properties. In addition to rectangular permanent magnets and conductive plate, both primary back iron and secondary back iron are considered in the proposed eddy current damper, which represents an improved design over previous configurations. The analytical method based on the charge model of permanent magnets is extended to simulate the extra damping effect of the primary back iron and secondary back iron, and the magnet field and damping properties of the dampers are evaluated analytically. The use of a back iron in the proposed damper is shown to increase the damping coefficients by a factor of up to 5. The analytical results are compared with those obtained with the finite-element analysis in terms of accuracy in magnetic field distributions, eddy current distributions, and damping coefficients. The linear assumption, which implies the damping force is linearly proportional to velocity in the analytical model, is also examined for different motional velocities and relative permeability of the permanent magnet. It is shown that the linear damping assumption in the analytical model is only valid for a limited range of low velocity, and this velocity range can be increased by reducing the thickness or conductivity of the conductive plate. In addition, a modification is needed for the analytical model if the relative permeability of the permanent magnet significantly deviates from the assumed value of 1.0. Finally, the accuracy of the analytical model and the finite-element model is verified by experiment of a prototype damper mounted in a laboratory steel frame.

Modeling and Analysis of A Novel Planar Eddy Current Damper

Modeling and Experiments Study of Inverse Magnetostrictive Effect for a New Kind of Passive Adaptive MR Damper

Dynamic Characteristics and Modeling of A New Magnetorheological Damper for Broadband Vibration Control

Research On Dynamic Characteristics Of A Magnetorheological Damper With Decoupling Mechanism

Modeling, Testing, and Validation of an Eddy Current Damper for Structural Vibration Control

A Journal Eddy Current Damper for Rotor Systems

Optimal Design of Magnetic System for the Magnetorheological Intelligent Damper

Magnetic Field Controlling Squeeze Film Damper for Rotor System

Vibration Control of a Radial Journal Eddy Current Damper on Flexible Rotor Systems

Dynamic Performance of a Radial Eddy Current Damper under Variable-time Magnetic Field

Studies on a Passive Electromagnetic Damper

Integral Methodology for the Multiphysics Design of an Automotive Eddy Current Damper

Experimental and Theoretical Investigation on Dynamic Behavior of a Flexible Rotor Supported on a Shear-Type Magnetorheologic Fluid Damper

Dynamic Modeling of Large-Scale Magnetorheological Damper Systems for Civil Engineering Applications

Dynamic Analysis of Magnetorheological Damper Incorporating Elastic Ring in Coupled Multi-Physical Fields

A ROUTE TO DESIGN ROTARY MAGNETORHEOLOGICAL DAMPERS

Mathematical Modeling and FEA of Magnetic Density for MR Damper

A Ferrofluid-based Planar Damper with Magnetic Spring

Design and finite element analysis of magneto-rheological differential damper

Design and experimental study of the porous foam metal magnetorheological fluid damper based on built-in multi-pole magnetic core

Eddy current damper for passive reaction force compensation of a linear motor motion stage