Abstract:The thermal, magnetic and magnetocaloric properties of amorphous Fe80-xMxB10Zr9Cu1 (M = Ni or Ta; x = 0, 3, and 5) alloys were investigated. Both Ni and Ta additions reduce the crystallization temperature (T-x1). The Curie temperature (T-C) can be increased or decreased by the addition of Ni or Ta, respectively. The saturation magnetization (M-S) decreases from 126.5 Am-2 kg(-1) (without Ni or Ta) to 83.5 or 29.4 Am-2 kg(-1) for 5 at.% Ni or Ta addition, respectively. The maximum magnetic entropy change (-Delta S-M)(max) of the amorphous alloys shows a decline trend with increasing Ni or Ta content. Under an applied magnetic field change of 5 T, the (-Delta S-M)(max) for Fe80-xNixB10Zr9Cu1 with x = 0, 3, and 5 are 3.28, 3.13, and 3.04 J kg(-1) K-1, respectively, while the (-Delta S-M)(max) for Fe80-xTaxB10Zr9Cu1 with x = 3 and 5 are 2.84 and 2.03 J kg(-1) K-1, respectively. The values of refrigeration capacity (RC) for the experimental alloys are higher than those of Fe80-xGdxCr8B12 (x = 5 and 10) alloys. In particular, the RC for the Fe80-xNixB10Zr9Cu1 (x = 3 and 5) and Fe77Ta3B10Zr9Cu1 alloys are comparable to that of the well-known MCM crystalline Gd5Si2Ge2. With large RC, negligible hysteresis and good thermal stability, these alloys can be used as the high temperature magnetic refrigerants working in the temperature range of 330-410 K. (C) 2015 Elsevier B.V. All rights reserved.

Magnetocaloric Effect In Fe-Zr-B-M (M = Ni, Co, Al, And Ti) Amorphous Alloys

Large Field-Induced Magnetocaloric Effect in Ni<formula formulatype="inline"><tex Notation="TeX">$_{43}$</tex> </formula>Mn<formula formulatype="inline"><tex Notation="TeX">$_{46 - {\rm x}}$</tex></formula>V<formula formulatype="inline"><tex Notation="TeX">$_{\rm x}$</tex></formula>Sn<formula formul

Thermal, Magnetic and Magnetocaloric Properties of Fe80−M B10Zr9Cu1 (M = Ni, Ta; X= 0, 3, 5) Amorphous Alloys

Influence of Co and Ni addition on the magnetocaloric effect in Fe88−2xCoxNixZr7B4Cu1 soft magnetic amorphous alloys

Large Refrigeration Capacity in a Ni42Co8Mn37.7In12.3 Magnetocaloric Alloy

Structure, Magnetic Properties and Magnetocaloric Effects of Fe 50 Mn 15− X Co X Ni 35 Alloys

Magnetocaloric Effect with Low Magnetic Hysteresis Loss in Ferromagnetic Ni-Mn-Sb-Si Alloys

Magnetic and Magneto-Caloric Properties of the Amorphous Fe<sub>92-x</sub>Zr<sub>8</sub>B<sub>x</sub> Ribbons

Difference in magnetic properties and magnetocaloric effect of FeRh<sub>0.98</sub>Al<sub>0.02</sub> alloy with different sample sizes

Giant magnetocaloric effects of MnNiSi-based high-entropy alloys near room temperature

Magnetocaloric Effect in Tb(Co0.94Fe0.06)2 Alloy with Negligible Thermal Hysteresis and Wide Working Temperature Range

Large Low-Field Magnetocaloric Effect in a Directionally Solidified Ni 50 Mn 18 Cu 7 Cu 25 Alloy

The Magnetostructural Transition and Magnetocaloric Properties in Fe0.6Mn0.4NiSi1−xAlx Alloys

Improved magnetocaloric effects in AlFe2B2 intermetallics through the enhancement of magnetoelastic coupling

Tunable Curie temperature and large magnetocaloric effect in off-stoichiometric La MM Fe10.2Co1.0Si1.8 alloys

Development of Fe-based amorphous alloy with high iron content for room-temperature magnetic refrigeration application

The magnetic, structural properties and magnetocaloric effects of Fe-Mn-Al alloys

Achieving table-like magnetocaloric effect and large refrigerant capacity around room temperature in Fe78−xCexSi4Nb5B12Cu1 (x=0–10) composite materials

Enhanced Magnetocaloric Effects of Ni-Fe-Mn-Sn Alloys Involving Strong Metamagnetic Behavior

Design of Co-based amorphous alloys with magnetocaloric effect near room temperature

Giant magnetocaloric effect in nanostructured Fe-Co-P amorphous alloys enabled through pulse electrodeposition