Abstract:In order to increase the degree of ionization and improve the efficiency, the effects of different cylindrical outer wall lengths on the discharge characteristics of the annular-cylindrical combined channel Hall thruster are studied. The cylindrical outer wall is set to the following positions: 95% (with positive magnetic field gradient), and 100%, 95%, 90%, 75%, and 50% (with negative magnetic field gradient) of the maximum magnetic field. The ionization gain and wall energy loss under different positions are analyzed through numerical simulations. The simulation result shows that when the cylindrical outer wall is set to the position where it is 100%–90% of the maximum magnetic field (negative magnetic field gradient zone), the power deposition on the channel wall is small, the propellant utilization can be largely improved, and the comprehensive performance is optimal for the annular-cylindrical combined channel Hall thruster.In order to increase the degree of ionization and improve the efficiency, the effects of different cylindrical outer wall lengths on the discharge characteristics of the annular-cylindrical combined channel Hall thruster are studied. The cylindrical outer wall is set to the following positions: 95% (with positive magnetic field gradient), and 100%, 95%, 90%, 75%, and 50% (with negative magnetic field gradient) of the maximum magnetic field. The ionization gain and wall energy loss under different positions are analyzed through numerical simulations. The simulation result shows that when the cylindrical outer wall is set to the position where it is 100%–90% of the maximum magnetic field (negative magnetic field gradient zone), the power deposition on the channel wall is small, the propellant utilization can be largely improved, and the comprehensive performance is optimal for the annular-cylindrical combined channel Hall thruster.

Hall Thruster With Grooved Walls

Experimental and numerical investigation of a Hall thruster with a chamfered channel wall

High-voltage Discharge Characteristics of a Hybrid-Wall Hall Thruster with an Aft-Loaded Magnetic Field

Experimental Test of 200 W Hall Thruster with Titanium Wall

High-Voltage Discharge Optimization of a Hybrid-Wall Hall Thruster

A 200-W Permanent Magnet Hall Thruster Discharge with Graphite Channel Wall

Effects of Annular-Cylindrical Combined Channel Hall Thruster Length on the Discharge Characteristics

Numerical Study on the Electron-Wall Interaction in A Hall Thruster with Segmented Electrodes Placed at the Channel Exit

Optimization of a Long-Lifetime Hall Thruster with an Internally Mounted Cathode

Optimization of a wall-less Hall thruster

Effect of Oscillating Sheath on Near‐Wall Electron Current Profile in Hall Thrusters

Performance characteristics of No-Wall-Losses Hall Thruster

Expanding the Design Freedom of the Chamfered Wall Shape of a Magnetically Shielded Hall Thruster

Optimizing a Hall Thruster with Aft-Loaded Magnetic Field by Aft-Loading Design of Gas Flow

Particle‐in‐cell Simulation of the Effect of Curved Magnetic Field on Wall Bombardment and Erosion in a Hall Thruster

Improving the Specific Impulse of Hall Thrusters using a Wide Channel Design

Application of Hollow Anodes in A Hall Thruster with Double-Peak Magnetic Fields

Effect of Oblique Channel on Discharge Characteristics of 200-W Hall Thruster

Effect of Matching Between the Magnetic Field and Channel Length on the Performance of Low Sputtering Hall Thrusters

Investigation of Short-Channel Design on Performance Optimization Effect of Hall Thruster with Large Height–radius Ratio

Experimental and Numerical Studies of Low Power Hall Thruster Performance