Abstract:Light extinction method with real liquid is difficult to be realized in the experiment of the polarization controlled light intensity modulated SPRi sensor.Meanwhile,the sensor bearslow sensitivity and poor linearity.Therefore,the extinction method of shifting extinction refraction index forward without real liquid is proposed.First,the simulations on optimal optical parameters and their errorsarising from machining and adjustment were carried out through the former method whose extinction refractive indexis locatedat the starting point(pure water)of the measurement curve.It''s indicated that the errors will cause the shifts of SPRi curve''s lowest pointon the refractive index axis.Consequently the performance of the sensor will be influenced.Then,the extinction refractive index was shifted to 1.325,and the optimal values of the parameters were simulated.The experimental results show that compared with the former method,the errors in 1.325 extinction method do not make the measurement curve non-monotonic,and high sensitivity,good linearity are obtained.The refractive index resolution is 1.85×10-6 RIU and the corresponding detection limit of NaCl solution is 35 mg/L.The proposed method improves the applicability of SPRi sensor with the existence of errors,and highly sensitive and throughput detection of trace amounts of samples in aqueous solutions can be achieved.

Improved Polarization Contrast Method for Surface Plasmon Resonance Imaging Sensors by Inert Background Gold Film Extinction

Contrast-Enhancing Polarization Control Method for Surface Plasmon Imaging Sensor

Experimental Study on the Influence of the Metal Film Thickness on Surface Plasmon Resonance Biosensors

Polarization interference interrogation of angular surface plasmon resonance sensors with wide metal film thickness tolerance

Sensitivity enhancement of surface plasmon resonance imaging sensor with structural parameter optimization based on polarization contrast modulation

Resonance Plasmonic Gold Microwell Arrays for High-Performance Surface Plasmon Resonance Imaging Based on Polarization Contrast Modulation

Experimental Study of the Optimal Metal Film for Surface Plasmon Resonance

Intensity-Modulated Surface Plasmon Resonance Array Sensor Based on Polarization Control

A Two-Dimensional Polarization Interferometry Based Parallel Scan Angular Surface Plasmon Resonance Biosensor

Polarization-interferometry-based Wavelength-Interrogation Surface Plasmon Resonance Imager for Analysis of Microarrays

Micro-nano Structurized Gold Chip for SPR Imaging Sensor

Study and Numerical Simulation of a Surface Plasmon Resonance Sensor Using Bi-Beam Differential Measurement Approach

Study on Highly Sensitive Detection of Polarization ControlledLight Intensity Modulated SPRi Sensor

Enhanced Stability in Surface Plasmon Resonance Sensor Using Prism Coupler Based on Au/Bi2O3 Bilayer Film

Research of Surface Plasmon Resonance on Gold Film Using Scanning Near-Field Optical Microscopy

Theoretical analysis of surface plasmon resonance in capillary sensors

Design of a Surface Plasmon Resonance Sensor Based on Grating Connection

Surface Plasmon Resonance Sensing Technology and Bioanalytical Instrument

Theoretical Analysis and Fabrication of PDMS-based Surface Plasmon Resonance Sensor Chips.

Theoretical analysis of metamaterial-gold auxiliary grating sensing structure for surface plasmon resonance sensing application based on polarization control method

Research and Optimization on Novel SPW Sensor with a High Sensitivity by Using the Double Metal Layers Structure