Abstract:The Pancharatnam–Berry (PB)-phase liquid crystal (LC) planar optical elements, featuring large apertures and a light weight, are emerging as the new generation optics. The primary method for fabricating large-aperture LC planar optical elements is through photo-alignment, utilizing polarization laser direct writing. However, conventional polarization direct writing suffers from an inertia-induced stopping step during splicing, leading to suboptimal optical effects. Here, we propose a novel highly efficient method for arbitrary polarization patterning, significantly reducing interface splicing errors in these optical elements. (We call it dynamic polarization patterning technology). This process involves simultaneous mobile splicing and real-time generation of different polarization patterns for exposure, eliminating the inertia-related splicing interruption. As a demonstration, we fabricated a lens with an aperture of approximately 1 cm within 30 min at 633 nm. Furthermore, we developed a 100% fill-factor lens array (3 × 3) with an element lens diameter of approximately 7 mm within 1.5 h at 532 nm. Their focal lengths were uniformly set at 30 cm, demonstrating superior convergence capabilities within their designated working wavelengths, alongside commendable performance in converging light across various other wavelengths. Our measurements confirmed the good focusing performance of these samples. The convergence spot size of the lens deviated by approximately 40% from the theoretical diffraction limit, whereas the lens array exhibited a deviation of around 30%. The dynamic polarization direct writing during uniform platform movement reduced splicing errors to a mere 100–200 nm. The enhancement in imaging quality can be primarily attributed to the innovative use of mobile polarization splicing exposure technology, coupled with the inherent self-smoothing properties of LC molecules. This synergy significantly mitigates the impact of seam diffraction interference.

Single-exposure polarization phase-shifting interferometer using an azo-polymer orientation array

Axial Adjustable Common-Path Interferometric Phase Imaging System Based on Prism Reuse

Polarization-interferometry-based Wavelength-Interrogation Surface Plasmon Resonance Imager for Analysis of Microarrays

Multi-Directional Lateral Shearing Interferometer Based on Rotatable Prism Pairs

Alignment Technique for Polarization-Based Optical-Systems

Freeform Liquid–Crystal Polarization Imaging Optics: A Practical Approach from Design to Fabrication

Multistate polarization addressing using one single beam in an azo polymer film

Polarization Multiplexing Silicon-Photonic Optical Phased Array for 2D Wide-Angle Optical Beam Steering

A polarimeter based on electric-optical material

Optical Circular-Polarization Modulator Employing Tilt-Poled Electrooptic Polymers

Polarization Diffraction Gratings in PAZO Polymer Thin Films Recorded with Digital Polarization Holography: Polarization Properties and Surface Relief Formation

Photorefractive Polymer with Self-orientated Polarization

Single-shot spatial light interference microscopy by demultiplexing based on polarization gratings

All optical sub diffraction multilevel data encoding onto azo polymeric thin films

Polarization-insensitive Interferometer Based on a Hybrid Integrated Planar Light-Wave Circuit

Photo-induced Phase-Matched Second-Harmonic Generation in Azodye-Doped Polymer Films by Nonresonant Dual-Frequency Coherent Excitation

Dynamic Polarization Patterning Technique for High-Quality Liquid Crystal Planar Optics

Single-Shot Quantitative Polarization Imaging of Complex Birefringent Structure Dynamics

Reference-free polarization-sensitive quantitative phase imaging using singe-point optical phase conjugation

Fiber self-mixing interferometer with orthogonally polarized light compensation.

Photoinduced Holographic Phase Gratings Buried in Azobenzene Side-Chain Polymer Films with A Chiral Group