Abstract:The building sector is targeting net-zero emissions through the integration of renewable energy technologies, especially for space cooling and heating applications. In this regard, the use of solar thermal concentrating collectors is of vital importance. The performance of these collectors increases by using an efficient fluid such as a nanofluid due to their high thermal conductivity. This research addresses the preparation, stability analysis, and characterisation of metallic and non-metallic oxide nanofluids and their experimental analysis in a compound parabolic collector (CPC) system. Five different combinations of nanofluids are used with different volumetric concentrations (0.025%, 0.05%, and 0.075%) including multi-wall carbon nanotube with water (MWCNT–H2O), multi-wall carbon nanotube with ethylene glycol (MWCNT–EG), aluminium oxide with water (Al2O3–H2O), aluminium oxide with ethylene glycol (Al2O3–EG), and magnesium oxide with ethylene glycol (MgO–EG). The prepared nanofluids are characterised in terms of thermal conductivity and viscosity. Detailed experimentation is performed to investigate the CPC system integrated with the nanofluids. The results obtained from the detailed characterisation of the MWCNT–H2O nanofluid showed that the nanofluids have a 37.17% better thermal conductivity than distilled water as a primary fluid, and the MWCNT–EG nanofluid has demonstrated an increase in viscosity by 8.5% compared to ethylene glycol (EG). The experimental analysis revealed that the thermal efficiency of the collector integrated with the MWCNT–H2O nanofluid is increased by 33% compared to water. Meanwhile, the thermal efficiency of the collector with MWCNT–EG was increased by 24.9% compared to EG. Moreover, a comparative analysis among metallic nanofluids was also performed, i.e., Al2O3–H2O, Al2O3–EG, and MgO–EG. In each case, the thermal efficiency of the collector was recorded, which was greater than the base fluid by percentages of 29.4%, 22.29%, and 23.1%, respectively. The efficiency of non-metallic nanofluids is better than metallic nanofluids by 7.7%. From the obtained results, it can be concluded that the CPC system performed best with MWCNT–H2O compared to any other combination of nanofluids.

Experimental investigation on the thermal efficiency and performance characteristics of a flat plate solar collector using SiO 2 /EG–water nanofluids

Investigation on the Radiative Characteristics of ZnO-SiO2 Nanofluids in Spectral Splitting Photovoltaic/thermal Systems

Experimental Study on the Performance of a Flat-Plate Collector Using WO3/Water Nanofluids

Feature of SiO2 concentration on solar thermal functional characteristics of flat plate solar collector

An experimental investigation on the effect of Al2O3/distilled water nanofluid on the energy efficiency of evacuated tube solar collector

Performance Analysis of a Minichannel-Based Solar Collector Using Different Nanofluids

Heat Transfer, Pressure Drop, and Entropy Generation in a Solar Collector Using SiO2/Water Nanofluids: Effects of Nanoparticle Size and Ph

Influence of Water Based Binary Composite Nanofluids on Thermal Performance of Solar Thermal Technologies: Sustainability Assessments

An Experimental Investigation of the Effect of using Non-Newtonian nanofluid- Graphene Oxide /Aqueous solution of Sodium Carboxymethyl Cellulose- on the Performance of Direct Absorption Solar Collector

Enhancing thermal efficiency of parabolic trough collectors using SiO2 nanofluids: a comparative study of particle size impact on solar energy harvesting

A brief review and comparative evaluation of nanofluid application in solar parabolic trough and flat plate collectors

Numerical analysis with experimental validation for thermal performance of flat plate solar water heater using CuO/distilled water nanofluid in closed loop

Performance enhancement by tungsten trioxide and silicon dioxide mixed nanofluids in solar collector of evacuated tube type

Second Law Analysis of a Nanofluid-Based Solar Collector Using Experimental Data

Impact of hybrid nanofluid on thermal behavior of flat-plate solar collector: performance study

Heat transfer study of a new hybrid photovoltaic/thermal direct absorption parabolic solar collector by two-phase Buongiorno model

Thermo-Fluid Characteristics of a Flat-Plate Collector with Different Riser Tube Configurations Employing ZnO/Water Nanofluids: An Experimental and Numerical Analysis

Performance of copper oxide/distilled water nanofluid in evacuated tube solar collector (ETSC) water heater with internal coil under thermosyphon system circulations

Performance Characteristic Analysis of Metallic and Non-Metallic Oxide Nanofluids for a Compound Parabolic Collector: Improvement of Renewable Energy Technologies in Buildings

Evaluation of Wavy Direct Absorption Solar Collector (DASC) Performance Using Different Nanofluids

Enhanced heat transfer performance in a parabolic trough solar collector: A CFD investigation of silver and copper nanofluids utilizing porous medium