Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

Effects of Material Morphology on the Performance of Organic Electronics

Unraveling the Role of Morphology on Organic Solar Cell Performance

Morphology Control in Organic Solar Cells

Editorial: High-Performance Organic Thin-Film Transistors

Advances in Organic Micro/nanocrystals with Tunable Physicochemical Properties

New Insights into the Correlation between Morphology, Excited State Dynamics, and Device Performance of Small Molecule Organic Solar Cells

Complex multilength-scale morphology in organic photovoltaics

Morphology Controlling of All‐Small‐Molecule Organic Solar Cells: from Donor Material Design to Device Engineering

In Situ Morphology Control for Solution‐Printable Organic Photovoltaics

Relating Chemical Structure to Device Performance Via Morphology Control in Diketopyrrolopyrrole-Based Low Band Gap Polymers

A materials physics perspective on structure–processing–function relations in blends of organic semiconductors

Interface Engineering and Morphology Control for High Performance Perovskite/Organic Hybrid Planar Heterojunction Solar Cells

Morphology and Performance of Polymer Solar Cell Characterized by DPD Simulation and Graph Theory

The Influence of Film Morphology in High‐Mobility Small‐Molecule:Polymer Blend Organic Transistors

Solution Sequential Deposited Organic Photovoltaics: from Morphology Control to Large-Area Modules

Characterization of the Morphology of Solution-Processed Bulk Heterojunction Organic Photovoltaics

On the Morphology of Polymer‐based Photovoltaics

Recent Advances of Film–Forming Kinetics in Organic Solar Cells

Achieving an Efficient and Stable Morphology in Organic Solar Cells Via Fine-Tuning the Side Chains of Small-Molecule Acceptors

A Review On Morphology Engineering For Highly Efficient And Stable Hybrid Perovskite Solar Cells

Influence of thin-film processing on the performance of organic field-effect transistors