Abstract:In recent years, vibration energy harvesting technology from environmental vibration has been a research topic of increasing interest. It is a new way to overcome the problem of power supply for low-power electronic devices. To utilize the low-frequency random vibrations in the environment, we designed a magnetostrictive (Fe-Ga alloy) energy harvester for transient shock vibration, which effectively converts low-frequency shock vibration into high-frequency vibration. Based on the mechanical dynamics analysis of the Fe-Ga alloy cantilever beam, we established the energy harvesting model of the machine-magneto-electric coupling system. The influence of the pre-magnetized magnetic field on the energy harvesting device was analyzed using finite elements and experiments were conducted under various magnetic field arrangements. Experimental testing was conducted to investigate the main working performance of the harvester in depth under transient excitation. The effect of applied load resistance on generation power, generation power density, as well as mechanical and electrical energy conversion efficiencies was investigated. It was experimentally verified that the magnetostrictive energy harvester could reach a voltage of 1356 mV, power of 26.163 mW, and power density of 115.01 mW/cm 3 under the excitation of 2 N. When connected in series with a 17 Ω resistor, the average efficiency of mechanical energy conversion to electrical energy was about 30.52%. With the assistance of a signal interface circuit, the energy harvester successfully lit up the LED display of an electronic meter, verifying the power generation ability of the harvester. The results of the study effectively utilize the transient shock vibration in the environment, and provide an effective and feasible method for the practical application of magnetostrictive harvesters.

The Design of an Interface Circuit for Micro-Electrostatic Vibration Energy Harvesters and Super-Capacitor

Piezoelectric Micro-power Generation to Charge Supercapacitor with Optimized Duty Cycle

Design and Fabrication of a Micro Electrostatic Vibration-to-Electricity Energy Converter

On a spring-assisted multi-stable hybrid-integrated vibration energy harvester for ultra-low-frequency excitations

Self-powered Electromagnetic Energy Harvesting for the Low Power Consumption Electronics: Design and Experiment

Vibration Energy Conversion Power Supply Based on the Piezoelectric Thin Film Planar Array

An Intermittent Self-Powered Energy Harvesting System from Low-Frequency Hand Shaking

A speed-amplified tri-stable piezoelectric-electromagnetic-triboelectric hybrid energy harvester for low-frequency applications

Collision based capacitive vibration energy harvesting

Optimization of an electret-based energy harvester

Harvesting Ambient Vibration Energy Over A Wide Frequency Range For Self-Powered Electronics

Three-Port Power Electronic Interface With Decoupled Voltage Regulation and MPPT in Electromagnetic Energy Harvesting Systems

Repulsively Driven Frequency-Increased-Generators For Durable Energy Harvesting From Ultra-Low Frequency Vibration

Design of a Low-Frequency Vibration Energy Harvester Based on Motion-Synchronized Multi-Layer Electrostatic Generator

Synchronized switch charge constrained conditioning circuit for electrostatic energy harvesting

A Planar PCB Based Energy Harvester with Voltage Multiplier

An ultra-low-frequency, broadband and multi-stable tri-hybrid energy harvester for enabling the next-generation sustainable power

Study of a magnetostrictive energy harvester for harvesting transient shock vibration

A Compact Self-Power Module Based on Electromagnetic Energy Harvester and Voltage Multiplier

Electret-based cantilever energy harvester: design and optimization

The dynamic characteristics of harvesting energy from mechanical vibration via piezoelectric conversion