Abstract:Using a computer-aided image recording monitoring system, extensive measurements have been performed in the inner layer of 66 kV cross-linked polyethylene (XLPE) cables. It has been found that there are three kinds of electrical trees in the samples, the branch-like tree, the bush-like tree and the mixed tree that is a mixture of the above two kinds. When the applied voltage frequency is less than or equal to 250 Hz, only the mixed tree appears in XLPE samples, when the frequency is greater than or equal to 500 Hz, only the dense branch-like tree develops, both of which are attributed to the coexistence of non-uniform crystallization and internal residual stress in semicrystalline XLPE cables during the process of manufacturing. Through the fractal analyses of these electrical trees, it has been found that both the propagation and structure characteristics can be described by fractal dimension directly or indirectly. It is suggested that the propagation and structural characteristics of electrical trees are closely related to the morphology and the residual stress in material at low frequency, i.e., the propagation characteristics of electrical trees depends upon not only the boundaries between big spherulites and amorphous region, but also the impurity, micropore concentration and the relative position of needle electrode tip with respect to spherulites or amorphous region in the low frequency range. However, at high frequency, it has nothing to do with the morphology of material. It is suggested that the injection and extraction process of charge from and to dielectrics via the needle electrode are more intense at high frequency than in low frequency. Thus, it can form relatively uniform dielectric weak region in front of needle electrode, which leads to similar initiation and propagation characteristics of electrical trees at high frequency.

Investigation on Chaotic Characteristic of PD Magnitude Series during Propagation of Electrical tree in XLPE Power Cables

Nonlinear time series analysis of partial discharges in electrical trees of XLPE cable insulation samples

Propagation and Partial Discharge Characteristics of Electrical Trees in 110 Kv XLPE Cable Insulation at Power Frequency Applied Voltage

The chaos characteristics analysis for electrical treeing propagation in XLPE power cables

Propagation stage characteristics of electrical tree in 110kV XLPE cable insulation at 50Hz power frequency voltage

Study on conducting characteristics of electrical trees in cross-linked polyethylene cable insulation

Investigation of temperature effect on electrical trees in XLPE cable insulation

On the Conducting and Non-Conducting Electrical Trees in XLPE Cable Insulation Specimens

Partial Discharge and Growth Characteristics of Electrical Trees in 110kV XLPE Cable Insulation at High Temperature

Trees in 110 kV XLPE cable insulation at high temperature

The Electrical Trees Initiation at Different Electric Field Strength in XLPE Cable Insulation

Study on propagation characteristics and analysis of partial discharges for electrical treeing in XLPE power cables

The Initiation and Propagation of Electrical Trees at Different Electric Field and Temperature in XLPE

Design of Measurement System for Electrical Tree in XLPE Cable Insulation at High Temperature

Electrical treeing behavior at high temperature in XLPE cable insulation samples

Effect of temperature on partial discharges activity and electrical trees propagation in XLPE

Investigations of Electrical Trees in the Inner Layer of XLPE Cable Insulation Using Computer-Aided Image Recording Monitoring

The Growth of Electrical Tree and Its PD in Inner and Outer Layer of 110kv XLPE Cable Insulation

PD Detecting during the Growth of Electrical Trees in HV XLPE Cable

The Experimental Study on Tree Growth in Xlpe Using 3d Pd Patterns