Abstract:A series of small-scale 1 g model tests were conducted using a self-designed pile driving loading model test system to investigate the effect of relative density and cross-section geometry on the development of soil stress around the pile during the penetration of X-section Cast-in-place Concrete (XCC) pile in sand. It is found that the variations of the radial stress Δ σ' r / σ' v0 in the surrounding soil presented a significant “ h / R effect” during the penetration of the XCC pile, indicating that the “ h / R effect”, which was found for circular pile during the penetration of piles, was also observed for the XCC pile. The radial stress distribution along the axial direction of the pile could be divided into three zones, i.e., the pile body region, the pile tip region, and the soil region below the pile tip. The development trend of the radial stress along with soil depth is different in each region. Additionally, the peaks of the radial stresses in the pile tip region were very sensitive to the variations of the relative density of the surrounding soils and the cross-section geometry of the piles, which increased significantly with increasing the relative density and cross-section geometry. The radial stresses Δ σ' r / σ' v0 decreased exponentially as the radial distance r/R increased. The decay rates decreased with increasing the relative densities of the surrounding soils, while increased with decreasing the cross-section geometry parameter of the piles.

An Analytical Solution for Load Transfer Mechanism of XCC Pile Foundations

An Analytical Solution for Lateral Vibration of a Pile with Finite Length Pile in Viscoelastic Subgrade

Analytical Elastoplastic Solutions of Laterally Loaded Long Piles

A Simplified Planar Model for Geosynthetics Reinforced Composite Foundation Subjected to Vertical Load

Analysis of Axial Load-Transfer of Large-Diameter Cast-in-situ Tubular Pile

An Analytical Solution for Settlement of Single Pile

Analytical Approach to Axially Loaded Concrete Core-Cement Soil Composite Pile

Load Transfer of Offshore Open-Ended Pipe Piles Considering the Effect of Soil Plugging

Experimental Study on the Development of Surrounding Soil Stress During XCC Pile Installation in Sand

An Analytical Analysis of a Single Axially-Loaded Pile Using a Nonlinear Softening Model

Analysis of Additive Load of Pipe Jacking Construction on Adjacent Pile

Semi-analytical Solutions for Single Piles under Lateral Loads Based on Subgrade Reaction Method

Displacement and Force Analyses of Piles in the Pile-Caisson Composite Structure under Eccentric Inclined Loading Considering Different Stratum Features

Model Test on Load Transfer Mechanism of a Static Drill Rooted Nodular Pile

Analysis Of Additional Load On Adjacent Pile Foundation Induced By Double-O-Tube Shield Tunnel Construction

Elastoplastic Solutions for Single Piles under Combined Vertical and Lateral Loads

Analysis of Q-S Curve on Negative Frictional Pile under Large-Scale Vertical Loads

Practical Method for the Pile Composite Ground under Flexible Foundation Based on Super-Substructure Interaction

FEM Analysis and Simplified Approach for a Single Energy Pile Subjected to Thermomechanical Loads

Numerical analysis on the performance of a cushioned foundation with a mixture of both rigid and flexible piles

Behavior Analysis of Laterally Loaded Single Pile under Large Deflection