Abstract:Fixing agents, highly cationic and low molecular weighted polyelectrolytes, are widely used in the papermaking industry to attach dissolved and colloidal substances (DCS) to wood fibres and remove them from papermaking systems. However, the interaction between the fixing agents and DCS is still not well understood. In this study, oxidized starch, resin acid, and mixes thereof were used as models for dissolved substances (DS), colloidal substances (CS), and dissolved and colloidal substances (DCS) in simulated papermaking furnishes, respectively. These were treated with three different polyamine fixing agents (PA) and their effect on the stability of the systems was evaluated by analyzing the residual concentrations of the model compounds after solid-liquid separation. The interactions between the dissolved substances and the colloidal substances were inferred from the results. The effectiveness of the fixing agents in removing the oxidized starch was poor while their effectiveness in removing the resin acid was good in the singular systems. However, in the mixed DCS system, the removal of the oxidized starch was improved, while that of the resin acid was worsened. The results indicate that when a fixing agent is added into the mixed DCS system, the DS is first changed into DS-polyelectrolyte complexes (PEC), and the PEC is attached to the CS particle surfaces, improving the stability of the latter and making it more difficult to remove. On the other hand, once the CS stability is disturbed and its agglomeration takes place, more DS can be removed compared to the singular DS system.

Stabilization of Potentially Sticky Substances in Pulp Mill Process Water with Polysaccharides

Effect of Fixing Agent Dosage on the Mechanism of Colloidal Substances Retention Onto Pulp

Study on the stability of potentially sticky substances in process water of newsprint mills

Study on the Stability of Potentially Sticky Substances in DCS of Masson Pine CTMP

Study on the interactions between dissolved and colloidal substances under the treatment of fixing agents in papermaking

Characterization of Dissolved and Colloidal Substances from Masson Pine CTMP and Study on Their Stability

Characterization of the Dissolved and Colloidal Substances from Newsprint Furnish and Their Stability Against Metal Ions

Effect of Polysaccharides on the Stability of Colloidal Potentially Depositable Substances

Enzymatic Control Of Detrimental Substances In Process Waters From Newsprint Mills

Study On Mechanism And Hydrolizability Of Dcs Substances In Process Water By Pectinases

Enzymatic Hydrolysis of Pectic Substances and Its Effect on the Stability of DCS from Mason Pine BCTMP

Starch-Based Fixing Agent With Proper Substitution Degree For Controlling Dissolved And Colloidal Substances In A Bleached Chemithermomechanical Pulp

Release Mechanism of Dissolved and Colloidal Substances (DCS) during Repulping of Mixed Office Wastepaper (MOW)

Effect of Pectinase Treatment of DCS in BCTMP on the Efficiency of Cationic Polymers

Stickies Deposition In Blends Of Deinked Pulp And Bleached Chemi-Thermo Mechanical Pulp

Effect of DCS in BCTMP on the Stickies Deposition

Effect of acid-associated mechanical pretreatment on the hydrolysis behavior of pine sawdust in subcritical water

Study On The Detrimental Substances In Masson Pine Bctmp Process Waters

Starch‐based Fixative with Proper Substitution Degree for Controlling Dissolved and Colloidal Substances in a Bleached Chemithermomechanical Pulp

High Performance of Hydrophilic Polymers on the Crosslinked Polystyrene Spheres for Controlling Contaminants in White Water

Hydrolyzability of Pectic Anionic Substances in Process Waters by Pectinases