Analytical analysis of the generation of a rotating driving magnetic field on the outer surface of a magnetic pinch load with a helical return current post
Shu-Chao Duan,Ge-Guang He,Shao-Tong Zhou,Ming-Xian Kan,Gang-Hua Wang
DOI: https://doi.org/10.1103/physrevaccelbeams.27.030401
2024-03-20
Physical Review Accelerators and Beams
Abstract:A recently emerging approach adopts a directionally time-varying (rotating) magnetic field to drive a pinch load, aiming to mitigate the inherent magneto-Rayleigh-Taylor instability in dynamic Z pinches. A helical return current post (RCP) serves as a functional structural element capable of generating the requisite driving magnetic field for this purpose in the load region. This paper first calculates the current azimuthally induced on the outer surface of a magnetically pinched load within this type of RCP using a zero-dimensional lumped-parameter circuit model. The results show that the induced current deviates significantly from the presumed "perfect" induced current (100% amplitude) as reported in the literature [S. A. Sorokin, Plasma Phys. Rep. 39 , 139 (2013); P. F. Schmit et al. , Phys. Rev. Lett. 117 , 205001 (2016); G. A. Shipley et al. , Phys. Plasmas 26 , 102702 (2019); and P. C. Campbell et al. , Phys. Rev. Lett. 125 , 035001 (2020)], with an effective coefficient of current induction considerably less than 1. However, even when the load is fully compressed to the axis, the effective coefficient does not approach zero but rather converges to a finite value that solely depends on the aspect ratio of the RCP. This is quite favorable for the suppression of magneto-Rayleigh-Taylor instability in the Z pinch. As for the pointlike X pinch, the axial magnetic field does not tend to zero but a finite value, though the effective coefficient tends to zero, and this result may be used to suppress the instability in X pinch and improve the time stability and spatiotemporal unity of hot spots. In addition, the anode and cathode plates have the potential to enhance the current induced in the load. This paper then analyzes the axial distribution and time behavior of the induced current adopting an approximate analytical method and numerical integration and finds an approximate invariance that can be well characterized by δt , the product of the normalized skin depth and time. Similar values of δt indicate similar axial distribution characteristics. When δt is lower than, at, or higher than the critical region ( ∼0.1–0.3 ), the axial distribution appears dumbbell shaped, nearly flat, and arched, respectively. These distributively induced currents can be exploited to achieve quasispherical, near flat, and dumbbell-shaped implosions, respectively. https://doi.org/10.1103/PhysRevAccelBeams.27.030401 Published by the American Physical Society under the terms of the Creative Commons Attribution 4.0 International license. Further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation, and DOI. Published by the American Physical Society
physics, particles & fields, nuclear