Abstract:This paper is devoted to the computation of the non-equilibrium composition of an SF6 plasma, and determination of the dominant particles and reactions, at conditions relevant to high-voltage circuit breakers after current zero (temperatures from 12 000 K to 1000 K and a pressure of 4 atm). The non-equilibrium composition is characterized by departures from both thermal and chemical equilibrium. In thermal non-equilibrium process, the electron temperature (T-e) is not equal to the heavy-particle temperature (T-h), while for chemical non-equilibrium, a chemical kinetic model is adopted. In order to evaluate the reasonableness and reliability of the non-equilibrium composition, calculation methods for equilibrium composition based on Gibbs free energy minimization and kinetic composition in a one-temperature kinetic model are first considered. Based on the one-temperature kinetic model, a two-temperature kinetic model with the ratio T-e/T-h varying as a function of the logarithm of electron density ratio (n(e)/n(e)(max)) was established. In this model, T* is introduced to allow a smooth transition between Th and Te and to determine the temperatures for the rate constants. The initial composition in the kinetic models is obtained from the asymptotic composition as infinite time is approached at 12 000 K. The molar fractions of neutral particles and ions in the two-temperature kinetic model are consistent with the equilibrium composition and the composition obtained from the one-temperature kinetic model above 10 000 K, while significant differences appear below 10 000 K. Based on the dependence of the particle distributions on temperature in the twotemperature kinetic model, three temperature ranges, and the dominant particles and reactions in the respective ranges, are determined. The full model is then simplified into three models and the accuracy of the simplified models is assessed. The simplified models reduce the number of species and reactions by a factor of about 2, while providing results that agree closely with the full model. Thus, the physicochemical processes of SF6 arc can be characterized by relatively few species and reactions in each temperature range. It is noted that the simplified models can also be applied to a wide range of pressures, 1-16 atm, conditions which cover most circuit breaker applications. The simplified species and reactions will allow the computing time of multidimensional models, taking into account departures from both thermal and chemical equilibrium, to be decreased dramatically while capturing the main physicochemical processes in SF6 arcs.

Computational Non-Chemically Equilibrium Model on the Current Zero Simulation in a Model N2circuit Breaker under the Free Recovery Condition

Chemically Non-Equilibrium Model of Decaying N2 Arcs in a Model Circuit Breaker

Investigation on chemically non-equilibrium arc behaviors of different gas media during arc decay phase in a model circuit breaker

Numerical modeling of CO<sub>2</sub> arc based on the non-chemically equilibrium effect

Influence of the Gas Flow Rate on the Nonchemical Equilibrium N-2 Arc Behavior in A Model Nozzle Circuit Breaker

Comparsion of CO2 Nozzle Arc Simulation During Current Zero Period based on the Non-CE and LTE Models

Effects of N<inf>2</inf> contents on the non-equilibrium composition in SF<inf>6</inf> decaying process

Study Of The Dissipation Of Residual Plasma With A One-Dimensional Particle-In-Cell Model In A Vacuum Circuit Breaker

Theoretical Investigation of the Decay of an SF6gas-blast Arc Using a Two-Temperature Hydrodynamic Model

Prediction of Dielectric Properties of Air Plasma for Circuit Breaker Application Based on a Chemically Non-equilibrium Model

Post-arc current simulation based on measurement in vacuum circuit breaker with a one-dimensional particle-in-cell model

Review on the Simulation Method of Non-Equilibrium Arc Plasma During Current Zero Period in the Circuit Breaker

Dominant Particles and Reactions in a Two-Temperature Chemical Kinetic Model of a Decaying SF6 Arc

Effects Of N-2 Contents On The Non-Equilibrium Composition In Sf6 Decaying Process

Two-Dimensional Particle-in-Cell/Monte Carlo Collisional Simulation of the Post-Arc Breakdown in Vacuum Circuit Breakers

Numerical Simulation of Residual Plasma Evolution in DC Vacuum Circuit Breakers Based on Artificial Current Zero

Fully Kinetic Model Of Breakdown During Sheath Expansion After Interruption Of Vacuum Arcs

Experimental and Theoretical Study of Decay and Post-Arc Phases of a SF6 Transfer Arc in DC Hybrid Breaking

3D Hybrid Simulation of Postarc Sheath Expansion with Nonuniform Residual Plasmas

One-Dimensional Particle-In-Cell Simulation On The Influence Of Electron And Ion Temperature On The Sheath Expansion Process In The Post-Arc Stage Of Vacuum Circuit Breaker

Two-dimensional kinetic simulation of plasma dynamics in the post-arc stage of vacuum circuit breakers