Abstract:Solid oxide fuel cell (SOFC) has experienced a growing interest in the last few decades because of generating energy more efficiently than the conventional combustion of fossil fuels. By using the same material as anode and cathode of symmetric solid oxide fuel cell (SSOFC), the production of reliable and repeatable cells would be simpler. In this work, La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ (LSCFN) has been investigated firstly as potential cathode material for SOFC. The cathode polarization resistances are only 0.1 Ω cm2 at 800 oC. The stability of phase structure, electrode microstructure and polarization resistances for the LSCFN in the atmosphere of air have been studied. Then, LSCFN have been investigated as potential anode material for SOFC. The results show that LSCFN have high catalytic activity in methane catalytic combustion reaction, the total conversion temperature of 1% CH4 using LSCFN as catalyst was as low as 650 oC. The performance of carbon-resistance and sulfur-tolerance in SOFC were studied using LSCFN ceramic anode with La0.8Sr0.2Ga0.83Mg0.17O3-δ (LSGM) electrolyte. Long-term operation of such single cell under methane lasted for 120 hours without degradation. The output power density fueled with H2-50 ppm H2S was stable enough in 120 hours’ operation which indicated a good sulfur-tolerant performance. Finally, the maximum power densities generated by the SSOFC cell with LSCFN electrode are 650 mW cm-2 in H2, and the cell maximum power output has demonstrated to be not affected by the redox cycling of the anode during a total of 21 cyclic testing, indicating that the LSCFN has excellent redox stability. All of these results indicate that LSCFN can potentially be a promising candidate for the electrode material of SSOFC.

Anode-supported Single-Chamber Solid Oxide Fuel Cell Based on Cobalt-Free Composite Cathode of Nd0.5Sr0.5Fe0.8Cu0.2O3−δ–Sm0.2Ce0.8O1.9 at Intermediate Temperatures

Low-temperature Solid Oxide Fuel Cells with Novel La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode and Functional Graded Anode

Nd 0.5 Sr 0.5 Fe 0.8 Cu 0.2 O 3−δ – X Sm 0.2 Ce 0.8 O 1.9 Cobalt-Free Composite Cathodes for Intermediate Temperature Solid Oxide Fuel Cells

Cobalt-free Sr0.7Y0.3CuO2+δ As a Cathode for Intermediate-Temperature Solid Oxide Fuel Cell

Characterization of SrCo 0.7 Fe 0.2 Nb 0.1 O 3−δ cathode materials for intermediate-temperature solid oxide fuel cells

High-performance and CO2‐resistant cathode toward electrocatalytic oxygen reduction for solid oxide fuel cells: Doped ceria and SrCo0.7Nb0.1Ni0.2O3-δ composite

Structure and Properties of Novel Cobalt-Free Oxides Nd x Sr 1– x Fe 0.8 Cu 0.2 O 3−δ (0.3 ≤ x ≤ 0.7) as Cathodes of Intermediate Temperature Solid Oxide Fuel Cells

Nano La0.6Ca0.4Fe0.8Ni0.2O3−δ Decorated Porous Doped Ceria As a Novel Cobalt-Free Electrode for “symmetrical” Solid Oxide Fuel Cells

Cerium and Niobium Doped SrCoO3−δ As a Potential Cathode for Intermediate Temperature Solid Oxide Fuel Cells

Electrochemical performance of novel cobalt-free oxide Ba0.5Sr0.5Fe0.8Cu0.2O3-δ for solid oxide fuel cell cathode

Structure And Properties Of Novel Cobalt-Free Oxides Ndxsr1-Xfe0.8cu0.2o3-Delta (0.3 <= X <= 0.7) As Cathodes Of Intermediate Temperature Solid Oxide Fuel Cells

Triple Perovskite Nd<sub>1.5</sub>Ba<sub>1.5</sub>CoFeMnO<sub>9−δ</sub>-Sm<sub>0.2</sub>Ce<sub>0.8</sub>O<sub>1.9</sub> Composite as Cathodes for the Intermediate Temperature Solid Oxide Fuel Cells

Composite Electrolyte Based On Nanostructured Ce0.8sm0.2o1.9 (Sdc) For Low-Temperature Solid Oxide Fuel Cells

Triple Perovskite Nd1.5Ba1.5CoFeMnO9−δ-Sm0.2Ce0.8O1.9 Composite as Cathodes for the Intermediate Temperature Solid Oxide Fuel Cells

SrCo0.9Sb0.1O3–δ Cubic Perovskite As a Novel Cathode for Intermediate-to-low Temperature SOFCs

A High Performance Composite Cathode with Enhanced CO2 Resistance for Low and Intermediate-Temperature Solid Oxide Fuel Cells

Coking-Resistance and Sulfur-Tolerance Study of La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ Anode

In situ self-assembled NdBa0.5Sr0.5Co2O5+δ/Gd0.1Ce0.9O2-δ hetero-interfaces enable enhanced electrochemical activity and CO2 durability for solid oxide fuel cells

Preparation and Characterization of New Cobalt-Free Cathode Pr0.5Sr0.5Fe0.8Cu0.2O3−δ for IT-SOFC

Study on microstructure and physical properties of Ba0.5Sr0.5Fe1−xCuxO3−δ–Ce0.8Sm0.15Ca0.05O1.875 cathode materials used in solid oxide fuel cell

PrNi 0.6Co 0.4O 3-Ce 0.8Sm 0.2O 1.9 composite cathodes for intermediate temperature solid oxide fuel cells