Abstract:High temperature proton exchange membrane fuel cells (HT-PEMFC) operated at a temperature range from 120 degrees C to 200 degrees C show high reaction kinetics, high tolerance of the Pt catalyst for impurities such as carbon monoxide and simplified water and heat management. HT-PEMFC has attracted great attentions in many applications including portable devices, unmanned vehicles and fuel cell cars. One of the essential components of the HT-PEMFC is high temperature proton exchange membrane (HT-PEM). The state-of-the-art HT-PEM is phosphoric acid (PA) doped polybenzimidazole (PBI) composite membrane. Phosphoric acid acts as the proton conductor while the PBI plays as a skeleton to hold the PA molecules and provides mechanical strength for the composite membrane. Nevertheless, the complex fabrication procedures and expensive cost hinder wide application of PBI in IIT-PFMPC. Alternative polymer skeletons including polyvinylpyrrolidone and amino-functionalized proton exchange membrane have been developed for the HT-PEM. Generally, the high proton conductivity of the HT-PEMs results from high doping level of PA. However, the plasticizer effect of PA molecules reduces the Van der Waals force among the polymer macromolecules. That leads to the low mechanical strength of the HT-PEMs. Cross-linking method significantly increases the mechanical strength of the HT-PEMs. On the other hand, the cross-linking reaction consumes the PA doping site of the HT-PEMs, leading to the low proton conductivity of these HT-PEMs. In this research, a novel self-crosslinked polyethyleneimine-polysulfone (PEI-PSF) HT-PEM with both high mechanical strength and high proton conductivity has been designed. The PEI molecules are anchored to the PSF backbones by chloromethylation and tertiary aminating reactions. That is prone to enhance the mechanical strength of the membrane. In addition, the PEI also acts as PA adsorption sites, which improves the PA doping level and proton conductivity of the HT-PEM. The degree of crosslinking is controlled by the degree of chloromethylation. The H-1 nuclear magnetic resonance characterization shows successfully graft of benzyl chloride onto the PSF backbone to form chloromethylated polysulfone (CMPSF). In addition, the X-ray photoelectron spectra confirm the reaction of PEI with CMPSF to form a self-crosslinked PEI-PSF membrane. With the increase of crosslinking degree, the PA doping level of the PEI-PSF membrane increases whereas its tensile strength decreases. A proton conductivity of 3.4 X10(-2) S.cm(-1) is obtained for a PEI-PSF membrane with a chloromethylation degree of 58%, denoted as PEI-PSF-58, and PA doping level of 122 wt% at 150 degrees C under anhydrous conditions. Meanwhile, the PEI-PSF-58 membrane remains excellent mechanical property with tensile strength of 30 MPa at room temperature. Moreover, HT-PEMFC based on the PEI-PSF-58 membrane exhibits a high peak power density of 200 mW.cm(-2) and outstanding stability under 150 C with a constant cell voltage of 0.4 V. In summary, a series of self-crosslinlced PEI-PSF HT-PEMs with both high proton conductivity and excellent mechanical properties have been synthesized. The self-crosslinking is a promising strategy to cope with trade-off between high proton conductivity and mechanical strength for the conventional PA doped HT-PEMs.

Dual Cross-Linked Organic-Inorganic Hybrid Polymer Electrolyte Membranes Based on Quaternized Poly(ether Ether Ketone) and (3-Aminopropyl)triethoxysilane

HT-PEMs Based on Nitrogen-Heterocycle Decorated Poly (arylene Ether Ketone) with Enhanced Proton Conductivity and Excellent Stability

Sulfonated Polyaryletherketone with Pendant Benzimidazole Groups for Proton Exchange Membranes

Composite Membranes Based on Polybenzimidazole and Ionic Liquid Functional Si–O–Si Network for HT-PEMFC Applications

Novel Cross-Linked Membranes Based on Polybenzimidazole and Polymeric Ionic Liquid with Improved Proton Conductivity for HT-PEMFC Applications

Quaternized Poly (Ether Ether Ketone)S Doped With Phosphoric Acid For High-Temperature Polymer Electrolyte Membrane Fuel Cells

Simultaneously Enhancing Proton Conductivity and Mechanical Stability of the Membrane Electrolytes by Crosslinking of Poly(aromatic Ether Sulfone) with Octa-Amino Polyhedral Oligomeric Silsesquioxane

Quaternized Poly(aromatic Ether Sulfone) with Siloxane Crosslinking Networks As High Temperature Proton Exchange Membranes

Phosphoric Acid Doped High Temperature Proton Exchange Membranes Based on Comb-Shaped Polymers with Quaternized Graft Architectures

3d Network Structural Poly (Aryl Ether Ketone)-Polybenzimidazole Polymer For High-Temperature Proton Exchange Membrane Fuel Cells

Quaternary ammonium-biphosphate ion-pair based copolymers with continuous H+ transport channels for high-temperature proton exchange membrane

New High Temperature Polymer Electrolyte Membranes Based on Poly(ethylene Imine) Crosslinked Poly(ether Ketone Cardo)

Construction of High-Performance, High-Temperature Proton Exchange Membranes through Incorporating SiO2 Nanoparticles into Novel Cross-linked Polybenzimidazole Networks

Novel High Temperature Proton Exchange Membranes Based on Functionalized Poly(arylene Dimethylamino Benzene) Polymers

In Situ Crosslinking of Polyoxometalate-Polymer Nanocomposites for Robust High-Temperature Proton Exchange Membranes

Self-crosslinked Polyethyleneimine-polysulfone Membrane for High Temperature Proton Exchange Membrane

Fabrication of PBI/SPOSS Hybrid High-Temperature Proton Exchange Membranes Using SPAEK As Compatibilizer

Preparation of High Temperature Proton Exchange Membranes with Multilayered Structures Through Alternate Deposition of Carbon Dots@metal Organic Framework and Sulfonated Poly(Ether Ketone)

Phosphonic Acid Grafted Polybenzimidazoles Containing Pyridine for Stable High-Temperature Proton Exchange Membrane Fuel Cells

Constructing Anhydrous Proton Exchange Membranes Based on Cadmium Telluride Nanocrystal-Doped Sulfonated Poly(ether Ether Ketone)/polyurethane Composites

PTFE-reinforced Pore-Filling Proton Exchange Membranes with Sulfonated Poly(ether Ether Ketone)s and Poly(aryl Ether Sulfone)s