Abstract:Abstract Background Although microbial fuel cells (MFCs) represent a promising technology for capturing renewable energy from wastewater, their scaling-up is significantly limited by a slow-rate cathodic oxygen reduction reaction (ORR) and the development of a resilient anodic microbial community. In this study, mixed transition metal oxides of nickel and copper (Ni and Cu), supported on a graphene (G) (NiO–CuO/G) electrocatalyst, were synthesized and tested as a cost-effective cathode for ORR in MFCs. Electrochemical measurements of electrocatalyst were conducted using a rotating disk electrode (RDE) and linear sweep voltammetry (LSV) in a neutral electrolyte, and compared with a benchmark Pt/C catalyst. Furthermore, the long-term performance of the as-synthesized electrocatalyst was evaluated in a single-chamber MFC by measuring organic matter removal and polarization behavior. The successful enrichment of electroactive biofilm was also monitored using transmission electron microscopy and the Vitek2 compact system technique. Results When compared with the benchmark platinum cathode, the NiO–CuO/G electrocatalyst exhibited high selectivity toward ORR. The rotating disk electrode (RDE) experiments reveal that ORR proceeds via a 4-electron ORR mechanism. Furthermore, the NiO–CuO/G electrocatalyst also exhibited a high power density of 21.25 mW m −2 in an air-cathode MFC, which was slightly lower than that of Pt/C-based MFC (i.e., 50.4 mW m −2 ). Biochemical characterization of the most abundant bacteria on anodic biofilms identified four genera (i.e., Escherichia coli , Shewanella putrefaciens , Bacillus cereus , and Bacillus Thuringiensis/mycoides ) that belonged to Gammaproteobacteria , and Firmicutes phyla. Conclusions This study demonstrates that the NiO–CuO/G cathode had an enhanced electrocatalytic activity toward ORR in a pH-neutral solution. This novel mixed transition metal oxide electrocatalyst could replace expensive Pt-based catalysts for MFC applications.

Silver/iron Oxide/graphitic Carbon Composites As Bacteriostatic Catalysts for Enhancing Oxygen Reduction in Microbial Fuel Cells

Bifunctional Ag/Fe/N/C Catalysts for Enhancing Oxygen Reduction Via Cathodic Biofilm Inhibition in Microbial Fuel Cells

Biofouling Inhibition on Nano-Silver/ferrous Sulfide/partly-Graphitized Carbon Cathode with Enhanced Catalytic Activity and Durability for Microbial Fuel Cells

Enhanced oxygen reduction upon Ag/Fe co-doped UiO-66-NH2-derived porous carbon as bacteriostatic catalysts in microbial fuel cells

Synthesis of Iron Oxide/Partly Graphitized Carbon Composites As A High-Efficiency and Low-Cost Cathode Catalyst for Microbial Fuel Cells

Enhanced Oxygen and Hydroxide Transport in a Cathode Interface by Efficient Antibacterial Property of a Silver Nanoparticle-Modified, Activated Carbon Cathode in Microbial Fuel Cells

Ag@Co/Zn N‐Doped Carbon as Antibacterial Oxygen Reduction Catalysts for Microbial Fuel Cells

Iron-rich Nanoparticle Encapsulated, Nitrogen Doped Porous Carbon Materials As Efficient Cathode Electrocatalyst for Microbial Fuel Cells

Bimetallic hybrids modified with carbon nanotubes as cathode catalysts for microbial fuel cell: Effective oxygen reduction catalysis and inhibition of biofilm formation

Metallic State Fes Anchored (Fe)/fe3o4/n-Doped Graphitic Carbon with Porous Spongelike Structure As Durable Catalysts for Enhancing Bioelectricity Generation

Highly Crystallized Fe2P Embedded in N-Doped Carbon for Enhancing Long-Term Bioelectricity Generation by Lowering Cathode Poisoning in Microbial Fuel Cells

Use of biogenic silver nanoparticles on the cathode to improve bioelectricity production in microbial fuel cells

Boosting the anode performance of microbial fuel cells with a bacteria-derived biological iron oxide/carbon nanocomposite catalyst

N-Doped Carbon-Supported CoCu-Layered Double Hydroxide Nanosheets as Antibacterial Oxygen Reduction Catalysts for Microbial Fuel Cells

Fe–N–C Composite Catalyst Derived from Solid Digestate for the Oxygen Reduction Reaction in Microbial Fuel Cells

Silver-tungsten carbide nanohybrid for efficient electrocatalysis of oxygen reduction reaction in microbial fuel cell

The enhancement of microbial fuel cell performance by anodic bacterial community adaptation and cathodic mixed nickel–copper oxides on a graphene electrocatalyst

Atomically Dispersed Fe–N4 Moieties in Porous Carbon As Efficient Cathode Catalyst for Enhancing the Performance in Microbial Fuel Cells

Advances in Understanding Carbon Composite Catalysts Based on Cathode for Microbial Fuel Cells

Two‐Dimensional Ag−Fe−N/C Nanosheets As Efficient Cathode Catalyst to Improve Power‐Generation Performance of Microbial Fuel Cells

Graphene oxide-supported zinc cobalt oxides as effective cathode catalysts for microbial fuel cell: High catalytic activity and inhibition of biofilm formation