Abstract:This paper describes a new linear matching method (LMM) technique for the direct evaluation of the ratchet limit of a structure subjected to a general cyclic load condition, which can be decomposed into cyclic and constant components. The cyclic load history considered in this paper contains multiload extremes to include most complicated practical applications. The numerical procedure uses the LMM state-of-the-art numerical technique to obtain a stable cyclic state of component, followed by a LMM shakedown analysis, to calculate the maximum constant load, i.e., the ratchet limit, which indicates the load carrying capacity of the structure subjected to a cyclic load condition to withstand an additional constant load. This approach is particularly useful in conjunction with the evaluation of the stable cyclic response, which produces the cyclic stresses, residual stresses, and plastic strain ranges for the low cycle fatigue assessment. A benchmark example of a holed plate under the combined action of cyclic thermal load and constant mechanical load is presented to verify the applicability of the new ratchet limit method through a comparison with published results by a simplified method assuming a cyclic load with two extremes. To demonstrate the efficiency and effectiveness of the method for a complicated cyclic load condition with multiload extremes, a composite thick cylinder with a radial opening subjected to cyclic thermal loads and a constant internal pressure is analyzed using the proposed ratchet limit method. Further verification by the ABAQUS step-by-step inelastic analysis demonstrates that the proposed new method provides a general-purpose technique for the evaluation of the ratchet limit and has both the advantages of programming methods and the capacity to be implemented easily within a commercial finite element code Abaqus.

Calculation of a lower bound ratchet limit part 2 : Application to a pipe intersection and dissimilar material join

A Direct Method for the Evaluation of Lower and Upper Bound Ratchet Limits

Calculation of a Lower Bound Ratchet Limit Part 1 – Theory, Numerical Implementation and Verification

A Direct Method on the Evaluation of Ratchet Limit

Ratchet Limits for A Crack in A Welded Pipe Subjected to A Cyclic Temperature Load and A Constant Mechanical Load

On Shakedown, Ratchet and Limit Analyses of Defective Pipeline

On the Ratchet Analysis of a Cracked Welded Pipe

Integrated structural analysis tool using the Linear Matching Method part 2 – Application and verification

Limit, Shakedown and Ratchet Analyses of Defective Pipeline under Internal Pressure and Cyclic Thermal Loading

A Fully Implicit, Lower Bound, Multi-Axial Solution Strategy for Direct Ratchet Boundary Evaluation: Theoretical Development

Li, Tianbai and Chen, Haofeng and Chen, Weihang and Ure, James Michael (2011) Ratchet limits for a crack in a welded pipe subjected to a cyclic temperature load an a constant mechanical load. In: ASME Pressure Vessels and Piping

Ratcheting Limit Assessment of Straight Pipes Subjected to Combinedinternal Pressure and Reversed Bending Moments.pdf

Chen, Weihang and Chen, Haofeng and Li, Tianbai and Ure, James Michael (2011) Limit, shakedown and ratchet analyses of defective pipeline under internal pressure and cyclic thermal loading. In: ASME Pressure Vessels

Comparison of the Linear Matching Method to Rolls-Royce's Hierarchical Finite Element Framework for ratchet limit analysis

Study of Ratchet Limit and Cyclic Response of Welded Pipe

Ratchet Analysis of Structures under a Generalised Cyclic Load History

A Generalised Method for Ratchet Analysis of Structures Undergoing Arbitrary Thermo‐mechanical Load Histories

Verification of the Linear Matching Method for Limit and Shakedown Analysis by Comparison with Experiments

Lower and upper bound limit analyses for pipeline with multi-slots of various configurations

Shakedown, Ratchet, and Limit Analyses of 90° Back-to-back Pipe Bends under Cyclic In-Plane Opening Bending and Steady Internal Pressure

A method for the evaluation of a ratchet limit and the amplitude of plastic strain for bodies subjected to cyclic loading