Abstract:Active noise control (ANC) technique has been successfully implemented by various automotive manufacturers to interior powertrain noise cancellation and/or sound management. For the powertrain noise control, the ANC system only requires one reference signal (typically using tachometer signal) due to the fact that the powertrain response is functionally related to the engine rotational speed. Instead, the multi-reference ANC system is often required for the road noise control since the multiple-coherence between the reference accelerometer signals and the target noise must be guaranteed to yield an acceptable control performance. However, the adoption of traditional multi-reference filtered-x least mean square (FXLMS) algorithm for road noise ANC often leads to a large computational burden and slow convergence rate due to the long length of adaptive filter and a huge dynamic range of the filtered reference signal. To address these problems, road noise ANC systems configured with the time-frequency domain FXLMS (TF-FXLMS) algorithm and subband FXLMS (SFXLMS) algorithm are developed, where the adaptive algorithm either calculates the gradient estimate and filtered reference signal in the frequency domain or subband frequency domain to reduce the computational requirement and also updates the control signals in the time domain to avoid delay in the reference path. Then, a comprehensive computational complexity analysis is conducted to exhibit the computational cost for different algorithms. The effectiveness of the different algorithms will be demonstrated through an ANC system with eight accelerometers, one secondary loudspeaker, and one error microphone in the driver side to control actual road noise.

Virtual Secondary Path Algorithm for Multichannel Active Control of Vehicle Powertrain Noise

Active Control of Vehicle Transient Powertrain Noise Using A Twin-Fxlms Algorithm

Modified FxLMS Algorithm with Equalized Convergence Speed for Active Control of Powertrain Noise

A Computationally Efficient Multichannel Active Road Noise Control System

Comparative Study of Adaptive Algorithms for Vehicle Powertrain Noise Control

Online Secondary Path Modeling Method for an Adaptive Active Noise Control System

A Multi-Channel Active Noise Control System Using Deep Learning-Based Method to Estimate Secondary Path and Normalized-Clustered Control Strategy for Vehicle Interior Engine Noise

Online secondary path modeling for active sound quality control systems

Control of Powertrain Noise Using a Frequency Domain Filtered-x LMS Algorithm

Active Control of Vehicle Powertrain Noise Using Adaptive Notch Filter with Inverse Model LMS Algorithm

A New Virtual Tracking Sub-Algorithm Based Hybrid Active Control System for Narrowband Noise with Impulsive Interference

An Active Noise Control System Using Online Secondary Path Modeling with Reduced Auxiliary Noise

Multi-Reference Time-Frequency Active Control of Vehicle Interior Road Noise

Combined Feedforward–Feedback Active Control of Road Noise Inside a Vehicle Cabin

Multiple secondary path models for active noise control

Kernel Filtered-x LMS Algorithm for Active Noise Control System with Nonlinear Primary Path

Experimental Study on Enhanced FXLMS Algorithm for Active Impulsive Noise Control

Adaptive Active Noise Control with Online Secondary Path Modelling and Variable Step-Size Learning

Active Noise Control with Double Channels Based on Virtual Sensors

Statistical Analysis of Multichannel FxLMS Algorithm for Narrowband Active Noise Control

Broadband Active Sound Quality Control Based On Variable Step Size Filtered-X Normalized Least Mean Square Algorithm