Abstract:Ni-Mn-Ga ferromagnetic shape memory alloys (FSMAs) have attracted great attention for more than two decades, due to their large magnetic shape memory effect that originates from the rearrangement of martensitic variants under an external magnetic field. Over the past decade, accumulated knowledge on the properties of Ni-Mn-Ga Heusler alloys has allowed people to foresee the possibility of employing these alloys in device applications. However, the low operating temperatures and high brittleness remain the major drawbacks for the industrial application. Consequently, there has been growing interest in the modification of Ni-Mn-Ga alloys by adding a fourth element to increase transformation temperatures and to improve ductility. A recent study shows that the ductility has been effectively improved in Cu-doped Ni-Mn-Ga alloy under the situation of single phase via strengthening grain boundaries. In addition, the crystal structure, martensitic transformation, magnetic properties, high temperature magnetoplasticity and magnetocaloric effect have been reported in Ni-Mn-Ga-Cu alloys. Experimental results have shown that the martensitic transformation temperature (T-m) is drastically increased and the Curie temperature (T-c) slightly decreased with Cu addition. As already known, the alloying elements affect both the crystal and electronic structures and hence the stability of austenite and martensite phases. Therefore, knowledge of the effects of Cu addition is of great importance to understand the composition dependence of T-m and T-c. First-principles calculation results on Ni8Mn4-xGa4Cux (x=0, 0.5, 1, 1.5 and 2) ferromagnetic shape memory alloys of this research draw following conclusions. The added Cu atom preferentially occupies the Mn site. The formation energy results indicate that ferromagnetic austenite is more stable than the paramagnetic one. The ferromagnetic state becomes instable and paramagnetic state becomes more stable when Mn is gradual substituted by Cu. The evaluated T-c decreases with increasing Cu content that is derived from the decrease of total energy difference between the paramagnetic and the ferromagnetic austenite. The experimentally observed decrease of T-m is originated from the decrease of total energy difference between the austenite and the non-modulated martensite. The difference between the up and down DOS is reduced with the increasing Cu content that gives rise to the decrease of the total magnetic moments. The purpose of this work is to explore the influence of Cu addition on crystal structure, T-m, T-c and electronic structures of Ni8Mn4-xGa4Cux (x=0, 0.5, 1, 1.5 and 2) alloys by first-principles calculations, aiming at providing theoretical data and directions for developing high performance FSMAs.

Effect of 3d transition elements substitution for Ni in Ni2Mn1+xSn1-x on the phase stability and magnetic properties: A first principle investigation

An Alloying Strategy for Tuning Magnetism, Thermal Hysteresis, and Mechanical Properties in Ni-Mn-Sn-based Heusler Alloys

The structural stability and magnetic properties of the ferromagnetic Heusler alloy Ni-Mn-Sn: A first principle investigation

Uncovering the origin of physical properties associated with magneto-structural transition of Ni-Mn-In- X alloys by ab initio methods

Origin of Unusual Properties in the Ferromagnetic Heusler Alloy Ni–Mn–Sn: A First-Principles Investigation

Martensitic Transformation And Phase Stability Of In-Doped Ni-Mn-Sn Shape Memory Alloys From First-Principles Calculations

First-Principles Calculations on Structural and Magnetic Properties of SmCo 3 Alloys Doped with Transition Metal Elements

First-Principle Calculation on the Effect of Mn and in on the Structural Stability and Magnetic Moment of SmCo7 Alloys

Unified physical mechanism for martensitic phase transition and ductility in Ni–Mn-based ferromagnetic shape memory alloys: the case of Cu-doped Ni2MnGa

First-principles study of martensitic transformation and magnetic properties of carbon doped Ni–Mn–Sn Heusler alloys

Martensitic transformation and magnetocaloric effect in Mn-Ni-Nb-Sn shape memory alloys: The effect of 4d transition-metal doping

Effect Of Transition Metal Element Additions On The Mechanical And Electronic Properties Of L1(0) Coni Alloys

Magnetic Order and Lattice Instabilities in Ni$_{2}$Mn$_{1+x}$Sn$_{1-x}$ Heusler based Magnetic Shape-Memory Alloys

Effect of substitutional doping and disorder on the phase stability, magnetism, and half-metallicity of Heusler alloys

A First-Principles Study on Crystal Structure, Phase Stability and Magnetic Properties of Ni-Mn-Ga-Cu Ferromagnetic Shape Memory Alloys

First-principles Study of the Structural, Electronic, and Magnetic Properties of Mn-doped Ni3XN(X=Al, Cu, In) Compounds

Alloying Effects on the Phase Stability and Mechanical Properties of Doped Cu-Sn IMCs: A First-Principle Study

Effect of Different Concentrations of Co Doping on the Properties of Η′‐cu6sn5 and Ni3Sn4: First‐Principles Study

Effect of Fe-Doping on Magnetic Structures and “Spin-Lattice-charge” Strong Correlation Properties in Mn3sn1-Xfexc Compounds

First-Principles Prediction of Structural, Mechanical and Magnetic Properties in Ni2mnal

Effect of Fe doping on the phase transitions,magnetocaloric effect and exchange bias in Mn50 Ni41-x Fex Sn9 alloys