Abstract:The (1 − x)(Li 0.03 Na 0.5 K 0.47 )(Nb 0.92 Sb 0.05 Ta 0.03 )O 3 –xBa 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (LNKNST–BCZT, x = 0, 0.5, 1.5, 2.5, and 3.5%) lead-free piezoceramics were synthesized by the conventional solid-state reaction method with adding nano-sized Ba 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (BCZT) powder to investigate their influences on crystal structure and electrical properties. The X-ray diffraction (XRD) analysis reveals that all the sintered LNKNST–BCZT ceramics exhibit pure perovskite structure with the mainly rhombohedral (R) phase or the coexistence of rhombohedral (R) phase and tetragonal (T) phase. The composition of the LNKNST–1.5%BCZT ceramics locates around the critical point, i.e., the ceramics changing from the coexistence of rhombohedral (R) phase and tetragonal (T) phase to purely rhombohedral (R) phase, and presents the most densified microstructure morphology, which can be confirmed further by the field emission scanning electron microscope (FESEM) observation. There are two dielectric anomalies in the temperature dependent dielectric properties curves of the LNKNST–BCZT ceramics, which correlate with the ferroelectric rhombohedral (R) phase changing to the ferroelectric tetragonal (T) phase, and then to the paraelectric cubic (C) phase. Both the Curie–Weiss law and the power law fittings confirm the diffuse phase transition ferroelectrics characteristic of the LNKNST–1.5%BCZT ceramics, which is considered as correlating with the polar nanoregions (PNRs). Due to the densification effect caused by the chosen amount of nano-sized BCZT doping and the construction of R–T polymorphic phase boundary, the LNKNST–1.5%BCZT ceramics exhibit the best ferroelectric and piezoelectric properties. The complex impedance spectroscopy analysis confirms that the extrinsic electrical conduction mechanism at high temperatures is dominated by the oxygen vacancies induced by the evaporation of the alkali metals during sintering.

Effects of BiFe 0.5 Ta 0.5 O 3 addition on electrical properties of K 0.5 Na 0.5 NbO 3 lead-free piezoelectric ceramics

New K0.48Na0.52NbO3–Bi(Zn0.5Zr0.5)O3 Lead-Free Ceramics: Microstructure and Piezoelectricity

Effects of nano-sized BCZT on structure and electrical properties of KNN-based lead-free piezoceramics

Preparation and Characterization on Piezo-/Ferro-electric Properties Of(1-X)(knn+lt)+xbi Ceramics

The Effects of Bi(Mg2/3nb1/3)O-3 on Piezoelectric and Ferroelectric Properties of K0.5na0.5nbo3 Lead-Free Piezoelectric Ceramics

Effects of the Addition of Li0.8Ni0.2Nb0.96O3 on the Structure and Electrical Properties of K0.48Na0.52NbO3 Lead-Free Piezoceramics

Low-Temperature Sintering of (K0.5Na0.5)NbO3-FeTiO3 Lead-Free Piezoelectric Ceramics

(Bi0.5na0.5)(zr0.97w0.01fe0.02)o3 Doping Effects on KNN‐based Lead‐free Ceramics Prepared Via Two‐step Sintering Technique

Phase Structure and Electrical Properties of Lead-Free (0.96Bi_(0.5)Na_(0.5)TiO_3~-0.04BaTiO_3)-(0.98K_(0.5)Na_(0.5)NbO_3~-0.02LiTaO_3) Piezoelectric Ceramics

Crystal structures and electrical properties of (1−x)K0.5Na0.5NbO3–xBi0.8La0.2FeO3 lead-free ceramics

Effects of the Co-Addition of Li, Sb, Ta on the Phase Structure and Piezoelectric Properties of (Na, K) NbO3 Lead Free Piezoceramics

Addition of Small Amounts of Bifeo3 to (Li,k,na)(nb,ta)o-3 Lead-Free Ceramics: Influence on Phase Structure, Microstructure and Piezoelectric Properties

Enhanced Piezoelectricity and Temperature Stability in LaFeO3-modified KNN-based Lead-Free Ceramics

Effect Of (Bi0.5k0.5)Tio3 On The Electrical Properties, Thermal And Fatigue Behavior Of (K0.5na0.5)Nbo3-Based Lead-Free Piezoelectrics

Piezoelectric and Ferroelectric Properties of LiNbO3-Doped (Bi0.5Na0.5)TiO3-(Bi0.5Na0.5)TiO3-BaTiO3 Lead-Free Piezoelectric Ceramics

Piezoelectric and Ferroelectric Properties of LiNbO_3-Doped (Bi_(0.5)Na_(0.5))TiO_3- (Bi_(0.5)K_(0.5))TiO_3-BaTiO_3 Lead-Free Piezoelectric Ceramics

Phase Characteristics and Piezoelectric Properties in the Bi<sub>0.5</sub>Na<sub>0.5</sub>TiO<sub>3</sub>-BaTiO<sub>3</sub>-K<sub>0.5</sub>Na<sub>0.5</sub>NbO<sub>3</sub>System

BNH doping enhances the piezoelectric properties and temperature stability of KNN-based lead-free piezoelectric ceramics

Effect of (Bi 0.5 K 0.5 )TiO 3 on the electrical properties, thermal and fatigue behavior of (K 0.5 Na 0.5 )NbO 3 -based lead-free piezoelectrics

Phase transitions, relaxor behavior, and electrical properties in (1- x )(Bi 0.5 Na 0.5 )Ti0 3- x (K 0.5 Na 0.5 )NbO 3 lead-free piezoceramics

Piezoelectric and dielectric properties of (Na0.5K 0.5)NbO3-Bi0.5(Na0.8K 0.2)0.5TiO3 lead-free ceramics