Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. In order to improve the path tracking performance and stability of intelligent vehicles during steering and collision avoidance working condition, an integrated control method combining four-wheel steering, active suspension and direct yaw-moment is proposed. Firstly, a unified chassis dynamics model with 18 degrees-of-freedom (DOF) is established, which includes steering, braking and suspension subsystems. Phase plane analysis results for both traditional 2-DOF bicycle model and the 18-DOF model are compared. The results show that although the uneven road has a certain influence on the phase portraits of sideslip angle and sideslip angular velocity of the 18-DOF model, the overall trend is consistent with those of the 2-DOF model. Secondly, a general control framework for steering and collision avoidance of autonomous vehicle is put forward, consisting of the steering control for path tracking, and active suspension and direct yaw-moment control for stability. The collision avoidance reference path is planned by the fifth-degree polynomial, and three types of steering control methods including optimal control front wheel steering, optimal control four-wheel steering and front wheel steering combined with feedforward and feedback control, are adopted for comparison. The main contribution of this paper is that the role of active suspension is considered in the path tracking and stability integrated control of intelligent vehicles under steering collision avoidance. The active suspension subsystem uses optimal control method by two different kinds of weight coefficients, which can be switched between "comfort mode" and "sport mode" based on the vehicle lateral acceleration. According to the phase portraits of vehicle center of gravity sideslip angle and sideslip angular velocity, the direct-yaw moment control system adopts proportional differential control method based on the distance from the state point to the stability boundary. Finally, simulations and comparative analysis are compared among four different control systems on high and low adhesion roads. The research results indicate that the integrated control system can improve the vehicle path tracking performance and stability significantly.

Study of Air-Cushion System Modelling for Semi-Track Air-Cushion Vehicle Body Attitude Control

Model-Free Adaptive Control of an Active Half-Vehicle-Seat System Coupled with a Nonlinear Energy Sink Inerter (NESI)

Adaptive control of a vehicle-seat-human coupled model using quasi-zero-stiffness vibration isolator as seat suspension

Design of Thrust Vectoring Vertical/Short Takeoff and Landing Aircraft Stability Augmentation Controller Based on L1 Adaptive Control Law

Semi‐active control of air suspension with auxiliary chamber subject to parameter uncertainties and time‐delay

Dynamics modeling and performance verification of the mechanical flight control system on transport airplane

Model reference backstepping control for semi-active air suspension systems with parameter uncertainty

Computational Studies of Aircraft Life-Support Systems

Numerical Forecasting And Experiment Research Of The Air Flow Rate For The Air Cushion Vehicle

Attitude Tracking Control of All-Terrain Vehicle with Tandem Active–Passive Suspension

Path tracking and stability integrated control of intelligent vehicles under steering collision avoidance

Study on modeling and simulation analysis for tailless configured V/STOL

Research on Coordinated Control of Vehicle Inertial Suspension Using the Dynamic Surface Control Theory

Negative Stiffness Control of Quasi-Zero Stiffness Air Suspension via Data-Driven Approach with Adaptive Fuzzy Neural Network Method

Integrated stability control of active aerodynamics and active rear-wheel steering for high-speed vehicle

Study on the Ride Performance of a Semi-Active Air Suspension Vehicle under Complex Models Based on Co-Simulation

A novel semi-active control of an integrated chassis and seat quasi-zero stiffness suspension system for off-road vehicles

Design and analysis of an integrated sliding mode control–two-point wheelbase preview strategy for a semi-active air suspension with stepper motor-driven gas-filled adjustable shock absorber

Research on air cushion suspension support system with low speed and heavy load

Integrated Design for Steering System and Suspension

Modelling And Control Of A Semi-Active Dual-Chamber Hydro-Pneumatic Inerter-Based Suspension System