Improving the Efficiency of the Hydrogenation of Carbonates and Carbon Dioxide to Methanol

yuehui li,kathrin junge,matthias beller

DOI: https://doi.org/10.1002/cctc.201300013

IF: 4.5

2013-01-01

ChemCatChem

Abstract:On the way to a green carbon cycle: Ding and co-workers developed the highly efficient catalyst 1 for the hydrogenation of cyclic carbonates to diols and methanol (TON up to 87 000) by modification of the industrially applied omega process.

What problem does this paper attempt to address?

Development and application of energy-saving process for methanol to olefins

Lijin Zhou,Feipeng Lu,Zuwei Liao,Yongrong Yang

DOI: https://doi.org/10.3969/j.issn.1000-8144.2017.07.014

2017-01-01

Abstract:A novel catalyst for high-temperature deacidification of the methanol to olefin(MTO) product was developed,which can solve the dew-point corrosion of organic acid in the MTO process.The deacidification reaction conditions of the catalyst were optimized.Under conditions of temperature 480 ℃,pressure 0.1 MPa,WHSV no more than 2.3 h-1,organic acid content was below 5.0 × 10-6(W) after 1 600 h running.Distribution of products was not affected by applying of the deacidification catalyst.Based on the catalyst effect,a new process of high-temperature deacidification of MTO products was proposed,and the energy recovery process was designed.The novel process was simulated by means of Aspen Plus software.The results showed that when the high-temperature deacidification unit was added and high-temperature heat recovery network was optimized,the total energy consumption of the full process can be reduced by 24.5％ compared with the traditional process.
A near-zero carbon emission methanol production through CO2 hydrogenation integrated with renewable hydrogen: Process analysis, modification and evaluation

Dongliang Wang,Jingwei Li,Wenliang Meng,Zuwei Liao,Siyu Yang,Xiaodong Hong,Huairong Zhou,Yong Yang,Guixian Li

DOI: https://doi.org/10.1016/j.jclepro.2023.137388

IF: 11.1

2023-01-01

Journal of Cleaner Production

Abstract:Carbon dioxide hydrogenation to produce methanol has the potential to liberate humanity from its reliance on fossil fuels, while simultaneously reducing carbon dioxide and developing the economy. This paper focuses on the effect of catalyst type and the process conditions such as temperature, pressure, H2/CO2 feed ratio, and space velocity on CO2 conversion and CH3OH selectivity. The net generated CO in the reaction system results in the loss of CO2 and H2 to the purge gas, which reduces the utilization efficiency of carbon and hydrogen. The specially designed catalysts and processes with recycling can improve CO2 conversion and CH3OH selectivity, and the CO flow rate difference can be close to zero in the total recycling condition. Starting from these ideas, the two kinds of near-zero carbon emission processes with total recycling (respectively named total recycling process after flash separation and named total recycling process after stripping separation) are proposed. The utilization efficiency of carbon and hydrogen are similar in the two processes, but hot and cold utilities in the latter are 17.96% and 15.11% lower than in the former, respectively. Through the process integration between reaction heat and double-effect distillation, the energy consumption is further reduced in the total recycling process after stripping separation. The utilization efficiency of CO2 is 99.88% in the total recycling process after stripping separation with double-effect distillation of the light split/reverse configuration, and the proposed process just requires cold utility.
Catalytic Hydrogenation of Cyclic Carbonates: A Practical Approach from CO2 and Epoxides to Methanol and Diols

Zhaobin Han,Liangce Rong,Jiang Wu,Lei Zhang,Zheng Wang,Kuiling Ding

DOI: https://doi.org/10.1002/anie.201207781

2012-01-01

Angewandte Chemie

Abstract:Two birds with one stone: the simultaneous production of two important bulk chemicals, methanol and ethylene glycol, from CO(2) and ethylene oxide has been achieved under mild conditions by the highly efficient homogeneous catalytic hydrogenation of ethylene carbonate in the presence of a (PNP)Ru(II) catalyst.
Recent Advances in Carbon Dioxide Hydrogenation to Methanol via Heterogeneous Catalysis

Xiao Jiang,Xiaowa Nie,Xinwen Guo,Chunshan Song,Jingguang G. Chen

DOI: https://doi.org/10.1021/acs.chemrev.9b00723

IF: 62.1

2020-02-12

Chemical Reviews

Abstract:The utilization of fossil fuels has enabled an unprecedented era of prosperity and advancement of well-being for human society. However, the associated increase in anthropogenic carbon dioxide (CO2) emissions can negatively affect global temperatures and ocean acidity. Moreover, fossil fuels are a limited resource and their depletion will ultimately force one to seek alternative carbon sources to maintain a sustainable economy. Converting CO2 into value-added chemicals and fuels, using renewable energy, is one of the promising approaches in this regard. Major advances in energy-efficient CO2 conversion can potentially alleviate CO2 emissions, reduce the dependence on nonrenewable resources, and minimize the environmental impacts from the portions of fossil fuels displaced. Methanol (CH3OH) is an important chemical feedstock and can be used as a fuel for internal combustion engines and fuel cells, as well as a platform molecule for the production of chemicals and fuels. As one of the promising approaches, thermocatalytic CO2 hydrogenation to CH3OH via heterogeneous catalysis has attracted great attention in the past decades. Major progress has been made in the development of various catalysts including metals, metal oxides, and intermetallic compounds. In addition, efforts are also put forth to define catalyst structures in nanoscale by taking advantage of nanostructured materials, which enables the tuning of the catalyst composition and modulation of surface structures and potentially endows more promising catalytic performance in comparison to the bulk materials prepared by traditional methods. Despite these achievements, significant challenges still exist in developing robust catalysts with good catalytic performance and long-term stability. In this review, we will provide a comprehensive overview of the recent advances in this area, especially focusing on structure–activity relationship, as well as the importance of combining catalytic measurements, in situ characterization, and theoretical studies in understanding reaction mechanisms and identifying key descriptors for designing improved catalysts.
A new perspective on hydrogenation of CO2 into methanol over heterogeneous catalysts

Xueyuan Pan,Jingcheng Xu,Yali Wang,Mingzhe Ma,Haiquan Liao,Hao Sun,Mengmeng Fan,Kui Wang,Kang Sun,Jianchun Jiang

DOI: https://doi.org/10.1016/j.pnsc.2024.03.002

2024-03-01

Abstract:The utilization of carbon dioxide is critical to realize the objective of "carbon peak and neutrality". Among various carbon dioxide exploitation approaches, catalytic hydrogenation of carbon dioxide is a significant method to selectively convert the CO2 into methanol and other valuable chemicals. Among these products, methanol is a crucial chemical feedstock that can be utilized as a platform molecule for the synthesis of chemicals and fuels as well as a fuel for internal combustion engines and fuel cells, causing particular interest. Nowadays, Catalytic hydrogenation of carbon dioxide into methanol has shifted its focus on the creation of low-cost, environmentally friendly, and efficient catalysts. Inspired of this, we have concluded the mechanism of catalytic hydrogenation of carbon dioxide, and reviewed the research progress of multiple heterogeneous catalysts with high catalytic application prospect, especially the supported catalysts.

materials science, multidisciplinary
CO2 hydrogenation to high-value products via heterogeneous catalysis

Run-Ping Ye,Jie Ding,Weibo Gong,Morris D. Argyle,Qin Zhong,Yujun Wang,Christopher K. Russell,Zhenghe Xu,Armistead G. Russell,Qiaohong Li,Maohong Fan,Yuan-Gen Yao

DOI: https://doi.org/10.1038/s41467-019-13638-9

IF: 16.6

2019-12-01

Nature Communications

Abstract:Abstract Recently, carbon dioxide capture and conversion, along with hydrogen from renewable resources, provide an alternative approach to synthesis of useful fuels and chemicals. People are increasingly interested in developing innovative carbon dioxide hydrogenation catalysts, and the pace of progress in this area is accelerating. Accordingly, this perspective presents current state of the art and outlook in synthesis of light olefins, dimethyl ether, liquid fuels, and alcohols through two leading hydrogenation mechanisms: methanol reaction and Fischer-Tropsch based carbon dioxide hydrogenation. The future research directions for developing new heterogeneous catalysts with transformational technologies, including 3D printing and artificial intelligence, are provided.

multidisciplinary sciences
CO 2 Hydrogenation to High-Value Products Via Heterogeneous Catalysis

Run-Ping Ye,Jie Ding,Weibo Gong,Morris D. Argyle,Qin Zhong,Yujun Wang,Christopher K. Russell,Zhenghe Xu,Armistead G. Russell,Qiaohong Li,Maohong Fan,Yuan-Gen Yao

DOI: https://doi.org/10.1038/s41467-019-13638-9

IF: 16.6

2019-01-01

Nature Communications

Abstract:Recently, carbon dioxide capture and conversion, along with hydrogen from renewable resources, provide an alternative approach to synthesis of useful fuels and chemicals. People are increasingly interested in developing innovative carbon dioxide hydrogenation catalysts, and the pace of progress in this area is accelerating. Accordingly, this perspective presents current state of the art and outlook in synthesis of light olefins, dimethyl ether, liquid fuels, and alcohols through two leading hydrogenation mechanisms: methanol reaction and Fischer-Tropsch based carbon dioxide hydrogenation. The future research directions for developing new heterogeneous catalysts with transformational technologies, including 3D printing and artificial intelligence, are provided.
Improving the Cu/ZnO-Based Catalysts for Carbon Dioxide Hydrogenation to Methanol, and the Use of Methanol As a Renewable Energy Storage Media

Ubong J. Etim,Yibing Song,Ziyi Zhong

DOI: https://doi.org/10.3389/fenrg.2020.545431

IF: 3.4

2020-09-29

Frontiers in Energy Research

Abstract:Heterogeneous catalytic hydrogenation of carbon dioxide (CO 2 ) to methanol is a practical approach to mitigating its greenhouse effect in the environment while generating good economic profits. Though applicable on the industrial scale through the syngas route, the catalyst of Cu/ZnO/Al 2 O 3 suffers from a series of technical problems when converting CO 2 to methanol directly, which include low single-pass conversion, low methanol selectivity, requiring high pressure and fast deactivation by the reverse water gas shift reaction. Over the years, intensive research efforts have been devoted to proffering solutions to these problems by modifying the existing catalyst or developing new active catalysts. However, the open question is if this type of widely used industrial catalyst still promising for CO 2 methanolizing reaction or not? This paper reviews the history of the methanol production in industry, the impact of CO 2 emission on the environment, and analyzes the possibility of the Cu/ZnO-based catalysts for the direct hydrogenation of CO 2 to methanol. We not only address the theoretical and technical aspects but also provide insightful views on catalyst development.

energy & fuels
Toward Methanol Production by CO2 Hydrogenation beyond Formic Acid Formation

Naoya Onishi,Yuichiro Himeda

DOI: https://doi.org/10.1021/acs.accounts.4c00411

2024-10-01

Abstract:ConspectusThe Paradigm shift in considering CO2 as an alternative carbon feedstock as opposed to a waste product has recently prompted intense research activities. The implementation of CO2 utilization may be achieved by designing highly efficient catalysts, exploring processes that minimize energy consumption and simplifying product purification and separation. Among possible target products derived from CO2, methanol is highly valuable because it can be used in various chemical feedstocks and as a fuel. Although it is currently produced on a plant scale by heterogeneous catalysis using a Cu/ZnO-based catalyst, a limited theoretical conversion ratio at high reaction temperatures remains an issue. In addition, a catalytic system that can be adjusted to accommodate a variable renewable energy source for the synthesis of methanol is more desirable than current continuous-operation systems, which require a reliable energy supply. Recently, significant progress has been made in the field of homogeneous catalysis, which primarily relies on an indirect route to synthesize methanol via the hydrogenation of carbonate or formate derivatives in the presence of additives and solvents. However, homogeneous catalysis is inappropriate for industrial-scale methanol production because of the inefficient separation and purification processes involved.In this Account, we demonstrate a novel approach for methanol production under mild reaction conditions by CO2 hydrogenation catalyzed by multinuclear iridium complexes under heterogeneous gas-solid phase conditions without any additives and solvents. One of the aims of this Account provides insights for overcoming the barriers for efficient CO2 hydrogenation by focusing on catalyst design, specifically by incorporating varying functionalities into the ligand. The fundamental strategy entails activating hydrogen molecule and enhancing the hydricity of the resulting metal-hydride species, which is based on the following two concepts of catalyst design: (i) Activating a metal-hydride by electronic effects; and (ii) accelerating H2 heterolysis. We have elucidated the mechanism for accelerating H2 heterolysis using a state-of-the-art catalyst that contains an actor-ligand that responds to or participates in catalysis as opposed to a classical spectator-ligand.We have also demonstrated a novel heterogeneous catalysis using a molecular catalyst as a key step for the hydrogenation of CO2 to methanol beyond formic acid formation. The dehydrogenation of formic acid as a reverse reaction of formic acid hydrogenation is strongly favored in acidic aqueous solution. To circumvent the equilibrium limitation, we have envisioned an alternative route that both prevents the liberation of formic acid into the reaction medium, and develops a multinuclear complex to facilitate the transfer of multiple reactive hydrides. The unconventional gas-solid phase catalysis is capable of preventing the liberation of formate species and promoting further hydrogenation of formic acid through multihydride transfer.This novel catalytic system, which is the fusion of a molecular catalyst in heterogeneous catalysis, provides high performance for methanol synthesis through a sophisticated catalyst design and straightforward separation processes. A detailed mechanistic analysis of molecular catalysts in the gas phase would lead to significant progress in the field of Surface Organometallic Chemistry (SOMC).
Recent Advances in the Mitigation of the Catalyst Deactivation of CO2 Hydrogenation to Light Olefins

Daniel Weber,Tina He,Matthew Wong,Christian Moon,Axel Zhang,Nicole Foley,Nicholas J. Ramer,Cheng Zhang

DOI: https://doi.org/10.3390/catal11121447

IF: 3.9

2021-11-28

Catalysts

Abstract:The catalytic conversion of CO2 to value-added chemicals and fuels has been long regarded as a promising approach to the mitigation of CO2 emissions if green hydrogen is used. Light olefins, particularly ethylene and propylene, as building blocks for polymers and plastics, are currently produced primarily from CO2-generating fossil resources. The identification of highly efficient catalysts with selective pathways for light olefin production from CO2 is a high-reward goal, but it has serious technical challenges, such as low selectivity and catalyst deactivation. In this review, we first provide a brief summary of the two dominant reaction pathways (CO2-Fischer-Tropsch and MeOH-mediated pathways), mechanistic insights, and catalytic materials for CO2 hydrogenation to light olefins. Then, we list the main deactivation mechanisms caused by carbon deposition, water formation, phase transformation and metal sintering/agglomeration. Finally, we detail the recent progress on catalyst development for enhanced olefin yields and catalyst stability by the following catalyst functionalities: (1) the promoter effect, (2) the support effect, (3) the bifunctional composite catalyst effect, and (4) the structure effect. The main focus of this review is to provide a useful resource for researchers to correlate catalyst deactivation and the recent research effort on catalyst development for enhanced olefin yields and catalyst stability.

chemistry, physical
Liquid-phase hydrogenation of carbon monoxide to methanol using a recyclable manganese-based catalytic system

Sebastian Stahl,Niklas Wessel,Andreas J. Vorholt,Walter Leitner

DOI: https://doi.org/10.1039/d4gc01050g

IF: 9.8

2024-06-08

Green Chemistry

Abstract:A simple and recyclable homogeneous catalytic system for the hydrogenation of carbon monoxide to methanol was established. The reaction is catalyzed by a molecular manganese complex using a high-boiling alcohol as the solvent for catalyst immobilization. The CO hydrogenation is assisted by the product itself and the solvent through the formation of a methyl or dodecyl formate ester intermediate mediated by catalytic amounts of NaOMe as the base. This allows the catalytic formation of methanol in alcohols combined with facile product separation and catalyst recycling via distillation. Initial turnover frequencies (TOF) of 2250 h −1 were reached under optimized conditions in 1-dodecanol/methanol as the reaction medium ( T = 160 °C, p (H 2 /CO) = 80/10 bar). The performance was stabilized in batch-wise recycling over 6 runs achieving a total turnover number (TTON) of >12 000 corresponding to an enhancement of more than five times compared to single batch operation under identical conditions. Minimal leaching of the components of the organometallic catalyst was observed during distillative product separation and catalyst activity could be fully restored by re-addition of the base NaOMe.

chemistry, multidisciplinary,green & sustainable science & technology
Carbonate Hydrogenated to Formate in the Aqueous Phase over Nickel/TiO2 Catalysts

Xiaochen Zhang,Aowen Li,Haoyi Tang,Yao Xu,Xuetao Qin,Zheng Jiang,Qiaolin Yu,Wu Zhou,Liwei Chen,Meng Wang,Xi Liu,Ding Ma

DOI: https://doi.org/10.1002/anie.202307061

2023-01-01

Angewandte Chemie

Abstract:Carbonate hydrogenation to formate is a promising route to convert captured carbon dioxide into valuable chemicals, thus reducing carbon emissions and creating a revenue return. Developing inexpensive catalysts with high activity, selectivity, and stability remains challenging. We report a supported non-noble metal catalyst, Ni/TiO2, with great selectivity over 96% and excellent stability in catalyzing the conversion of carbonate into formate in aqueous solution. Ni-0 and Ni2+ species are both observed in Ni/TiO2 catalysts, and the synergistic effect of these two Ni components leads to high activity and high selectivity of carbonate hydrogenation to formate.
Direct carbon dioxide hydrogenation to produce bulk chemicals and liquid fuels via heterogeneous catalysis

Zixuan Zhou,Peng Gao

DOI: https://doi.org/10.1016/s1872-2067(22)64107-x

IF: 16.5

2022-06-26

Chinese Journal of Catalysis

Abstract:The hydrogenation of carbon dioxide (CO 2 ) to produce chemicals and transportation liquid fuels in huge demand via heterogeneous thermochemical catalysis achieved using renewable energy has received increasing attention, and substantial advances have been made in this research field in recent years. In this study, we summarize our progress in the rational design and construction of highly efficient catalysts for CO 2 hydrogenation to methanol, lower olefins, aromatics, and gasoline- and jet fuel-range hydrocarbons. The structure-performance relationship, nature of the active sites, and mechanism of the reactions occurring over these catalysts are explored by combining computational and experimental evidence. The results of this study will promote further fundamental studies and industrial applications of heterogeneous catalysts for CO 2 hydrogenation to produce bulk chemicals and liquid fuels. Graphical abstract The hydrogenation of CO 2 to chemicals and fuels has a distinct CO 2 emission reduction effect. In this study, the catalyst design, selectivity regulation, structure-performance relationship, and reaction mechanism are discussed in detail. Download : Download high-res image (128KB) Download : Download full-size image

chemistry, physical,engineering, chemical, applied
Highly Efficient Hydrogenation of Carbonate to Methanol for Boosting CO2 Mitigation

Zhicheng Xie,Zheyi Sun,Bin Shao,Yuanming Zhu,Rongting Ma,Su Li,Jingkun Li,Yanxin Chen,Honglai Liu,Jun Hu

DOI: https://doi.org/10.1016/j.cej.2024.153465

IF: 15.1

2024-01-01

Chemical Engineering Journal

Abstract:The massive CO 2 emissions from the energy-intensive industrial sectors can trace to the thermal decomposition of raw mineral carbonates during high-temperature manufactories. To mitigate CO 2 emissions, we propose a novel strategy of carbonate-to-methanol through a highly efficient hydrogenation, where the carbon in mineral magnesite is used as a precious resource to unleash its tremendous value. More significantly, we break the tradeoff between the excessive H 2 for the complete magnesite conversion and the utilization efficiency of H 2 by the recycle usage of H 2 through the convenient gas -liquid separation of H 2 /CH 3 OH. Guided by the thermodynamic predictions, without any catalysts, the excessive H 2 accelerates the direct hydrogenation of magnesite in a twin tower at a relatively low temperature of 550 degrees C, almost approaching thermodynamic limit of 67 % CO selectivity at a complete magnesite decomposition. The outlet syngas with an extremely high molar ratio of H 2 to CO of 8 is further used for subsequent methanol production, achieving an outperformed 70 % CO conversion efficiency and over 99 % CH 3 OH selectivity. Comprehensive scale-up process simulations indicate that the proposed strategy could increase the H 2 utilization efficiency by over 80 %, where the carbon footprint assessment illustrates when the green H 2 from wind energy is supplied, the negative net CO 2 emissions of-5.6 kg CO2 /kg methanol at a low energy consumption of 10 MJ/kg methanol can be achieved, which highlights its promising industrialization prospects.
Efficient and New Production Methods of Chemicals and Liquid Fuels by Carbon Monoxide Hydrogenation

Ce Du,Peng Lu,Noritatsu Tsubaki

DOI: https://doi.org/10.1021/acsomega.9b03577

IF: 4.1

2019-12-18

ACS Omega

Abstract:Carbon monoxide (CO) hydrogenation is an important step for efficient utilization of carbon resources in C1 (one carbon) chemistry. Over recent years, this direction has been a hot research area in academia and industry and has also been one of the most challenging routes for the nonoil carbon resources utilization process. A large number of novel reaction routes and catalysts have been studied and reported. Efficient activation and directional conversion of CO are key aspects in the process of CO utilization. Furthermore, effectively activating C-O and C-C bond formation as well as controlling carbon chain growth is the current technical bottleneck of CO hydrogenation. This mini-review introduces the latest research progress for different catalyst systems and processes in CO hydrogenation and analyzes the factors that control the performance of catalysts in different reaction systems. Here, much focus is put on the synthesis of long-chain hydrocarbons, light olefins, C2+ oxygenates, and aromatics, essentially in comparison with the previous reports. Finally, the present challenges and future research directions have been discussed.
Selective Valorization of CO2 towards Valuable Hydrocarbons through Methanol‐mediated Tandem Catalysis

Fatima Mahnaz,Violet Dunlap,Ryan Helmer,Siddhesh Shirish Borkar,Ricardo Navar,Xiaokun Yang,Manish Shetty

DOI: https://doi.org/10.1002/cctc.202300402

IF: 4.5

2023-07-08

ChemCatChem

Abstract:The thermocatalytic conversion of carbon dioxide (CO2) into valuable hydrocarbons presents a promising solution for mitigating anthropogenic CO2 emissions while producing drop‐in replacements for fossil‐derived products. Among the two tandem mechanisms for the direct hydrogenation of CO2, the methanol synthesis coupled with the methanol to hydrocarbon (MTH) reaction offers an improvement over the reverse water‐gas shift coupled with Fischer‐Tropsch synthesis reaction (RWGS‐FTS), as it is not limited Anderson‐Schulz‐Flory distribution and yields higher selectivity towards specific products (e.g., olefins, aromatics, higher hydrocarbons). Herein, we focus on the recent progress achieved through this pathway and outline the existing knowledge gaps. We discuss the challenges involved in the process and highlight the key descriptors in the selection of catalyst components. Finally, we present several potential solutions to circumvent the current challenges, aiming to expedite the advancement of this route toward an efficient CO2 hydrogenation process.

chemistry, physical
The development of bifunctional catalysts for carbon dioxide hydrogenation to hydrocarbons via the methanol route: from single component to integrated components

Kok Bing Tan,Guowu Zhan,Daohua Sun,Jiale Huang,Qingbiao Li

DOI: https://doi.org/10.1039/d0ta09607e

IF: 11.9

2021-01-01

Journal of Materials Chemistry A

Abstract:We review and provide subtantial knowledge on bifunctional catalysts design strategies and development on metal/metal oxide and zeolite components: independently and integrated components for CO 2 hydrogenation to hydrocarbons via methanol route.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Efficient production of methanol and diols via the hydrogenation of cyclic carbonates using copper–silica nanocomposite catalysts

zhiwei huang,zhaobin han,kuiling ding,haichao liu,chungu xia,jing chen

DOI: https://doi.org/10.1039/C5GC00810G

IF: 9.8

2015-01-01

Green Chemistry

Abstract:Copper-silica nanocomposite catalysts with a uniform Cu dispersion prepared by a precipitation-gel method have been found to be highly efficient in the heterogeneous catalytic hydrogenation of CO2-derived cyclic carbonates, providing an indirect but practical approach for the transformation of CO2 to methanol with the co-production of diols under relatively mild conditions. The catalysts possessed remarkable stability in both batch and fixed-bed continuous flow reactors especially after promotion with B2O3. The reaction was found to depend sensitively on the Cu particle size, the surface acidity-basicity and the Cu valence of the catalysts. The synergetic effect between balanced Cu-0 and Cu+ sites was considered to play a critical role in attaining high yields of methanol and diols.
Catalytic carbon dioxide hydrogenation to methanol: A review of recent studies

Suhas G. Jadhav,Prakash D. Vaidya,Bhalchandra M. Bhanage,Jyeshtharaj B. Joshi

DOI: https://doi.org/10.1016/j.cherd.2014.03.005

IF: 4.119

2014-11-01

Chemical Engineering Research and Design

Abstract:Methanol demand is continuously increasing in the chemical and energy industries. It is commercially produced from synthesis gas (CO+CO2+H2) using CuO/ZnO/Al2O3 catalysts. Today, much effort is being put on the development of technologies for its production from carbon dioxide (CO2). In this way, the Greenhouse effect may be mitigated. Over the years, several useful works on CO2 hydrogenation to methanol have been reported in the literature. In this article, we present a comprehensive overview of all the recent studies published during the past decade. Various aspects on this reaction system (such as thermodynamic considerations, innovations in catalysts, influences of reaction variables, overall catalyst performance, reaction mechanism and kinetics, and recent technological advances) are described in detail. The major challenges confronting methanol production from CO2 are considered. By now, such a discussion is still missing, and we intend to close this gap in this paper.
Carbonate Hydrogenated to Formate in the Aqueous Phase over Nickel/TiO2 Catalysts.

Xiaochen Zhang,Aowen Li,Haoyi Tang,Yao Xu,Xuetao Qin,Zheng Jiang,Qiaolin Yu,Wu Zhou,Liwei Chen,Meng Wang,Xi Liu,Ding Ma

DOI: https://doi.org/10.1002/anie.202307061

2023-01-01

Abstract:Carbonate hydrogenation to formate is a promising route to utilize captured carbon dioxide into valuable chemicals, thus reducing carbon emissions and creating a revenue return. Developing inexpensive catalysts with high activity, selectivity, and stability remains challenging. We report a supported non-noble metal catalyst, Ni/TiO2, with great selectivity over 96% and excellent stability in catalyzing the conversion of carbonate into formate in aqueous solution. Ni0 and Ni2+ species are both observed in Ni/TiO2 catalysts, and the synergistic effect of these two Ni components leads to high activity and high selectivity of carbonate hydrogenation to formate.

Improving the Efficiency of the Hydrogenation of Carbonates and Carbon Dioxide to Methanol

Development and application of energy-saving process for methanol to olefins

A near-zero carbon emission methanol production through CO2 hydrogenation integrated with renewable hydrogen: Process analysis, modification and evaluation

Catalytic Hydrogenation of Cyclic Carbonates: A Practical Approach from CO2 and Epoxides to Methanol and Diols

Recent Advances in Carbon Dioxide Hydrogenation to Methanol via Heterogeneous Catalysis

A new perspective on hydrogenation of CO2 into methanol over heterogeneous catalysts

CO2 hydrogenation to high-value products via heterogeneous catalysis

CO 2 Hydrogenation to High-Value Products Via Heterogeneous Catalysis

Improving the Cu/ZnO-Based Catalysts for Carbon Dioxide Hydrogenation to Methanol, and the Use of Methanol As a Renewable Energy Storage Media

Toward Methanol Production by CO2 Hydrogenation beyond Formic Acid Formation

Recent Advances in the Mitigation of the Catalyst Deactivation of CO2 Hydrogenation to Light Olefins

Liquid-phase hydrogenation of carbon monoxide to methanol using a recyclable manganese-based catalytic system

Carbonate Hydrogenated to Formate in the Aqueous Phase over Nickel/TiO<sub>2</sub> Catalysts

Direct carbon dioxide hydrogenation to produce bulk chemicals and liquid fuels via heterogeneous catalysis

Highly Efficient Hydrogenation of Carbonate to Methanol for Boosting CO2 Mitigation

Efficient and New Production Methods of Chemicals and Liquid Fuels by Carbon Monoxide Hydrogenation

Selective Valorization of CO2 towards Valuable Hydrocarbons through Methanol‐mediated Tandem Catalysis

The development of bifunctional catalysts for carbon dioxide hydrogenation to hydrocarbons via the methanol route: from single component to integrated components

Efficient production of methanol and diols via the hydrogenation of cyclic carbonates using copper–silica nanocomposite catalysts

Catalytic carbon dioxide hydrogenation to methanol: A review of recent studies

Carbonate Hydrogenated to Formate in the Aqueous Phase over Nickel/TiO2 Catalysts.