Abstract:Membrane surface properties play important roles in determining the rate and severity of membrane fouling. This paper reported an innovative nanofiltration (NF) membrane called PENF which had a poly(piperazineamide) active layer formed on a polyethylene (PE) support layer. The PENF membrane was very attractive in that millimeter-sized surface patterns could be automatically formed by the pressing effect of applied pressure for which permeate spacer acted as the in situ imprinter. This was attributed to the thin and tough PE support layer, which could be easily deformed under the applied pressure for NF applications. The surface-patterned PENF membrane (PENF-P) demonstrated greatly enhanced resistance to organic, inorganic and scaling fouling as well as combined fouling, when compared to either the original PENF membrane or commercial NF membranes like NF270. Without surface patterns, the PENF membrane along with other NF membranes followed a same general rule in resisting membrane fouling; a more hydrophilic NF membrane was generally more resistant to fouling. Membrane integrity breaches caused by surface deformation and patterning were negligible in terms of glucose rejection and water permeability coefficient. The PENF-P membrane could reject glucose by >80% at an applied pressure of 3.5 bar and had a water permeability coefficient of >11 L/m(2)/h/bar. A continuous running of a small-size spiral-wound element of the membrane (0.85 m(2)) for over 3000 h confirmed that the PENF membrane had a long-time consistently high performance in terms of water permeation and solute rejection. The innovative PENF membrane and the involved surface patterning technique are expected to have a bright application prospect for water treatment and wastewater reclamation.

Influence of Nanoimprint Lithography on Membrane Structure and Performance

Use of Nanoimprinted Surface Patterns to Mitigate Colloidal Deposition on Ultrafiltration Membranes

Facile Synthesis of Micro-Eggette Patterned Nanofiltration Membrane with Enhanced Anti-Fouling and Rejection Performance

Influence of Sub-Micron Surface Patterns on the Deposition of Model Proteins During Active Filtration

Influence of Substrate Processing and Interfacial Polymerization Conditions on the Surface Topography and Permselective Properties of Surface-Patterned Thin-Film Composite Membranes

Pore Size Tailoring from Ultrafiltration to Nanofiltration with PVC-g-PDMA Via Rapid Immersion Thermal Annealing

Surface Patterning of Polymeric Membranes and Its Effect on Antifouling Characteristics

Polyethylene-supported nanofiltration membrane with <i>in situ</i> formed surface patterns of millimeter size in resisting fouling

Understanding the influence of hydraulic conditions on colloidal fouling development by using the micro-patterned nanofiltration membrane: Experiments and numerical simulation

Fractionation and Flux Decline Studies of Surface-Patterned Nanofiltration Membranes Using NaCl-glycerol-BSA Solutions

Patterning Flat-Sheet Poly(vinylidene Fluoride) Membrane Using Templated Thermally Induced Phase Separation

Polyethylene-supported nanofiltration membrane with in situ formed surface patterns of millimeter size in resisting fouling

Nanoporous membrane fabrication by nanoimprint lithography for nanoparticle sieving

Polyamide Membrane with Nanoscale Stripes and Internal Voids for High-Performance Nanofiltration

Molecular Design of the Polyamide Layer Structure of Nanofiltration Membranes by Sacrificing Hydrolyzable Groups Toward Enhanced Separation Performance.

Surface-patterning of Polymeric Membranes: Fabrication and Performance

Nanofiltration Membranes with Hydrophobic Microfiltration Substrates for Robust Structure Stability and High Water Permeation Flux

Relationship Between Permeation and Deformation for Porous Membranes

Preparation of an Ultrafiltration (UF) Membrane with Narrow and Uniform Pore Size Distribution via Etching of SiO2 Nano-Particles in a Membrane Matrix

Tuning the nano-porosity and nano-morphology of nano-filtration (NF) membranes: Divalent metal nitrates modulated inter-facial polymerization

Influence of Surface Micro-Patterning and Hydrogel Coating on Colloidal Silica Fouling of Polyamide Thin-Film Composite Membranes