Abstract:Polydicyclopentadiene can significantly improve the fracture toughness of the anhydride cured‐epoxy resin, and this improvement can be effectively transferred to the improvement of interlaminar mode I fracture toughness of the carbon fiber composites via VARI process. In this work, a dicyclopentadiene monomer/Grubbs 2 catalyst was added to a mixture of epoxy oligomers and methyl nadic anhydride to obtain a poly‐dicyclopentadiene (DCPD) modified epoxy cross‐linked network via sequential curing. The hybrid resin was used as a matrix for preparing carbon fiber composites. The results indicated that the addition of DCPD monomers significantly reduced the viscosity of the epoxy resin. The toughness and heat resistance of the co‐cured resin was improved without significant loss of strength, which was attributed to the high compatibility between epoxy and the modifier polymer. Regarding the composites, the flexural strength of the hybrid resin‐derived composite first increased and then diminished slightly. Meanwhile, the mode‐I interlaminar fracture toughness continued to increase with the increase of PDCPD content compared to the non‐modified composites. Generally, the change trend of the above properties in the composites was consistent with the change trend of the strength and toughness exhibited in the bulk resin with increasing PDCPD contents, while the change extent was inconsistent due to factors such as fiber volume content and interfacial bonding. Highlights The epoxy/PDCPD hybrid resin system was obtained via sequential curing. The PDCPD as modifier can reduce the viscosity of the epoxy curing system. The toughness and heat resistance of the PDCPD modified epoxy resin was improved. The loss in flexural strength of the hybrid resin system was insignificant. The GIC of the epoxy composites modified with PDCPD improved appreciably.

Preparation and properties of cyclopentadiene-containing monomer modified polydicyclopentadiene

Colorless Transparent Cyclobutanediol-Based Copolyesters with Excellent Polymerization Robustness, Thermal Stability, and High Performance

Polymerization of Cyclopentadiene Initiated by Methylaluminoxane

Improved Interfacial Adhesion And Manufaturing Method Of Mgf/P-Dcpd Composites Using W, Mo, Or Ru Type Catalysts In Air Condition

Morphology and mechanical properties of poly(ether-imide)-modified polycyanurates

Synthesis, characterization and lubricating effect of long chain branched polydimethylsiloxane-g-polyethylene copolymers

The Curing Behavior and Properties of Diglycidyl Ether of 4,4′-Bis(4-hydroxybenzoyloxy)-3,3′,5,5′-tetramethylbiphenyl and Its Composites with Multi-Wall Carbon Nanotubes

Synthesis of Polyethylene-G-polydimethylsiloxane Graft Copolymers by Copolymerization of Ethylene with Polydimethylsiloxane Macromonomer

Effect of different catalyst ratios on the ring-opening metathesis polymerization (ROMP) of dicyclopentadiene

Energy-efficient Frontal Polymerization of Poly(DCPD-co-TCPD) with Improving Thermomechanical Properties and Chemical Resistance

Effect of 5-ethylidene-2-norbomene or cyclopentene comonomers on the micro-structures, mechanical and dynamic mechanical properties of polydicyclopentadiene

Reinforcing effect of low polyethylene wax content on polydicyclopentadiene

Polydicyclopentadiene toughened epoxy resin and its carbon fiber composites via sequential polymerization

Copolymerization of Ethylene with Dicyclopentadiene Using a Constrained Geometry Cyclopentadienyl-phenoxytitanium Catalyst

Polydicyclopentadiene with Low Density and High Performance Was Synthesized by Using Thermal Expansion Microspheres

Cycloaliphatic epoxy-functionalized polydimethylsiloxanes for comprehensive modifications of epoxy thermosets

Incorporation of Crosslinked Polydicyclopentadiene Nanoparticles into Epoxy Thermosets Via Ring Opening Metathesis Polymerization-Induced Self-Assembly

Synthesis and Properties of Cyclopentyl Cardo-Type Polyimides Based on Dicyclopentadiene

The Tribological and Mechanical Properties of Pdcpd/Pew Composites Prepared by Reaction Injection Moulding

Reaction Injection Molding of Dicyclopentadiene

Ring‐opening Metathesis Copolymerization of Dicyclopentadiene and Cyclopentene Through Reaction Injection Molding Process