Abstract:Aiming at further investigating the combination effect of concentration of beta-nucleating agent (beta-NA) and stereo-defect distribution on the crystallization behavior of beta-nucleated isotactic polypropylene (beta-iPP), in this study, the crystallization behavior and polymorphic morphology of two beta-iPP resins with nearly same average isotacticity (PP-A and PP-B) but different uniformities of stereo-defect distribution were investigated by differential scanning calorimetry (DSC), wide angle X-ray diffraction (WAXD) and polarized optical microscopy (POM). The results of DSC and WAXD showed that the addition of TMB-5 increases the crystallization temperature and decreases the spherulite sizes of both PP-A and PP-B, and reduces their crystallization energy barriers as well; however, the polymorphic behaviors of PP-A and PP-B exhibit different dependence on the TMB-5 concentration. For PP-A with less uniform distribution of stereo-defects, beta-phase can be observed only when the TMB-5 concentration is no less than 0.1 wt.%, while for PP-B with more uniform stereo-defect distribution, addition of 0.01 wt.% TMB-5 can induce the formation of beta-phase. Moreover, the analysis of POM indicated that the crystalline morphologies of both PP-A and PP-B change greatly with the TMB-5 concentration, and the variation features of PP-A and PP-B are quite different from each other. PP-B with more uniform stereo-defect distribution was more favorable for the formation of large amount of beta-phase in the presence of wide concentration range of TMB-5. The different polymorphic behaviors and their different dependences on the beta-NA concentration were related to the different uniformities of stereo-defect distribution of the samples, since the distribution of stereo-defects could restrain the regular insertion of molecular chains during crystallization and thus determine the tendency the alpha-phase crystallization of the sample. Copyright (c) 2014 John Wiley & Sons, Ltd.

Influence of Melt Structure on the Crystallization Behavior and Polymorphic Composition of Polypropylene Random Copolymer

New understanding in the influence of melt structure and beta-nucleating agents on the polymorphic behavior of isotactic polypropylene

Exploring the roles of molecular structure on the β-crystallization of polypropylene random copolymer

Investigation on the Effects of MXene and Β-Nucleating Agent on the Crystallization Behavior of Isotactic Polypropylene

Effects Of Melt Structure On Crystallization Behavior Of Isotactic Polypropylene Nucleated With Alpha/Beta Compounded Nucleating Agents

Effects of melt structure on crystallization behavior of isotactic polypropylene nucleated with α/β compounded nucleating agents

Dynamic crystallization and melting behavior of β-nucleated isotactic polypropylene with different melt structures

Toward a Further Understanding of the Decreased Β-Phase Content in Β-Nucleated Polypropylene Random Copolymer: from Nucleation and Growth Kinetics

The Crystallization Morphology and Conformational Changes of Polypropylene Random Copolymer Induced by a Novel β-Nucleating Agent

Crystallization Behavior And Morphology Of Beta-Nucleated Isotactic Polypropylene With Different Stereo-Defect Distribution

Comparative Investigation On Crystallization Conditions Dependence Of Polymorphs Composition For Beta-Nucleated Propylene/Ethylene Copolymer And Propylene Homopolymer

Effects of Melt Structure on Non-Isothermal Crystallization Behavior of Isotactic Polypropylene Nucleated with Α/β Compounded Nucleating Agents

Synergistic Effects of Α/β-Nucleating Agents on Propylene-Ethylene Random Copolymer: New Clues for the Pipe Extrusion

Formation Mechanism and Morphology of Β-Transcrystallinity of Polypropylene Induced by Two-Dimensional Layered Interface

Study on Β-Nucleated Controlled-Rheological Polypropylene Random Copolymer: Crystallization Behavior and a Possible Degradation Mechanism

Crystalline Structure Of Injection Molded Beta-Isotactic Polypropylene: Analysis Of The Oriented Shear Zone

The Effect of Structure Evolution Upon Heat Treatment on the Beta-Nucleating Ability of Calcium Pimelate in Isotactic Polypropylene

Effect Of Beta-Nucleating Agents On Crystallization And Melting Behavior Of Isotactic Polypropylene

Investigation on the Roles of Β-Nucleating Agents in Crystallization and Polymorphic Behavior of Isotactic Polypropylene

Non-isothermal Crystallization Kinetics of PPR ContainingβNucleating Agent

Relationship Between Mechanical Properties and Crystalline Structure of PPR/iPP Blends Modified with β-Nucleator